DR221-113AE

Features Applications ■ RoHS compliant* ■ For the suppression of EMI in data and signal lines ■ Sector windings ■ Wide frequency range over 500 MHz ■ Rated current 0.1 to .025 A ■ High quality toroidal core DR221 Series Surface Mount Data Line Chokes General Specifications Electrical Specifications @ 25 °C L1, L2 @ 10 kHz, 0.1 Vrms (μH) Freq. Range (MHz) Impedance (Ω) Min. 11.0 +50 %/-30 % 100~500 450 Bourns Part No. DR221-113AE RDC (Ω) (Each Winding) Max. Typ. Rated Current (mA) 0.18 0.13 250 DR221-223AE 22.0 +50 %/-30 % 40~300 900 0.23 0.17 250 DR221-333AE 33.0 +50 %/-30 % 30~250 1000 0.27 0.20 200 DR221-513AE 50.0 +50 %/-30 % 20~150 1400 0.32 0.24 200 DR221-474AE 470 +50 %/-30 % 2.5~60 1100 0.35 0.28 100 Rated Voltage ....... 50 Vdc/100 Vac (ref.) Hipot (1 sec.) ........ 500 Vac/60 Hz, 3 mA Operating Temperature....-40 to +125 °C Storage Temperature .......-40 to +125 °C Temperature Rise .................25 °C max. at rated current Resistance to Solder Heat .................................... 260 °C 10 sec. Moisture Sensitivity Level ..................... 1 ESD Classification (HBM)................. N/A Materials Product Dimensions Recommended PCB Layout 6.00 ± 0.3 (.236 ± .012) 5.00 ± 0.3 (.197 ± .012) 0.60 (.024) 1 4 2 3 3.30 ± 0.3 (.130 ± .012) 2.70 (.106) TYP. 1.27 (.050) REF. 6.40 (.252) REF. DIMENSIONS: 3.30 ± 0.2 (.130 ± .008) Core ..............................................Ferrite Wire .... Enameled copper wire (Class F) Base ..............................LCP (UL 94V-0) Terminal ....................................Cu/Ni/Sn Adhesive .............................. Epoxy resin Weight ............................................... 2 g Packaging .................... 500 pcs. per reel Schematic MM (INCHES) N1 1 How to Order DR221 - 513 AE 3.10 (.122) TYP. 4 2 3 N2 = POLARITY Model Value/Tolerance See Model-Value Table 5.00 ± 0.3 (.197 ± .012) 2 3 1 4 0.40 (.016) Termination AE = Cu/Ni/Sn (Lead Free) Solder Profile 300 Lead Free Max. of 70 seconds > 200 °C Max. of 50 seconds > 230 °C Max. of 10 seconds > 255 °C 250 260 °C Tin-Lead Max. of 30 seconds > 200 °C 255 °C 230 °C 245 °C 200 (°C) Typical Part Marking Temperature 1.27 TYP. (.050) Lead Free 150 Tin-Lead 120 - 150 seconds 100 Ramp-down 5 °C/second maximum 113 = DR221-113AE 50 Ramp-up 4 °/second maximum 113 0 0 50 100 150 Time WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov 200 250 300 (Seconds) * RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. DR221 Series Surface Mount Data Line Chokes Impedance vs. Frequency 513AE 333AE 474AE Impedance (Ohms) 1000 223AE 113AE 100 10 1 10 100 1000 Frequency (MHz) Packaging Specifications 178.0 DIA. (7.00) 2.0 ± 0.5 (.079 ± .020) 20.5 (.807) COVER TAPE 13.0 ± 0.5 (.512 ± .020) DIA. 21.0 ± 0.8 (.827 ± .031) 50.0 (1.969) 13.0 DIA. (.512) EMBOSSED CARRIER 18.0 (.709) 16.0 (.630) 1.75 (.069) END DIA. 1.55 (.061) 8 (.315) 4 (.157) 16.0 (.630) 113 0420 160 (6.300) 113 0420 113 0420 113 0420 113 0420 NO COMPONENT START NO COMPONENT COMPONENTS USER DIRECTION OF FEED 500 PCS. PER REEL 400 (15.748) DIMENSIONS: MM (INCHES) REV. 11/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL