FVC2300

IA NT Features ■ Formerly ■ ■ ■ ■ Applications ■ GR-1089 ■ ITU K.20 and K.21 ■ ADSL2+ and VDSL2 linecards ■ LAN, WAN equipment brand Extremely low capacitance Very high bandwidth Small package, minimal PCB area RoHS compliant* *R oH S CO M PL FVC Series Voltage Control Devices Voltage Control Bourns® voltage control devices are used with high-speed series protectors to protect sensitive circuits from electrical disturbances caused by lightning-induced surges, inductive-coupled spikes, and AC power cross conditions. The unique structure and characteristics of the device are used to create an overvoltage protection device with precise and repeatable turn-on characteristics with low voltage overshoot and high surge current capabilities. Specifications Surge Rating Part Number IPP (A) 4 4 VDRM (V) 190 275 VS (V) 260 350 VT (V) 3 3 Electrical Characteristics IDRM (µA) 5 5 IS (mA) 400 400 IT (A) 1 1 IH (mA) 150 150 CO (pF) 6 6 FVC2300 FVC3100 IPP (peak pulse current) - maximum rated peak impulse current with 1.2/50 µs waveform VDRM (peak off-state voltage) - maximum voltage that can be applied while maintaining off state measured at IDRM VS (switching voltage) - maximum voltage prior to switching to on-state measured at 100 V/µs VT (on-state voltage) - maximum voltage measured at rated on-state current IDRM (leakage current) - maximum peak off-state current measured at VDRM IS (switching current) - maximum current required to switch to on state IT (on-state current) - maximum rated continuous on-state current IH (holding current) - minimum current required to maintain on state CO (off-state capacitance) - typical off-state capacitance measured at 1 MHz with a 2 V bias Typical Performance Characteristics +l IT IS IH IDRM -V VT VDRM VS +V -l General Notes: • All measurements are at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C. • IPP is a repetitive surge rating and is designed to be maintained for the life of the product. • The devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities. • Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications FVC Series Voltage Control Devices Product Dimensions B D Dim. A B C D E H Minimum 2.29 (0.090) 4.50 (0.177) 1.25 (0.050) 3.90 (0.154) 0.76 (0.030) 0.15 (0.006) — 1.95 (0.077) DIMENSIONS: MM (INCHES) Maximum 3.00 (0.118) 5.40 (0.213) 1.65 (0.065) 4.65 (0.183) 1.52 (0.060) 0.30 (0.012) 0.20 (0.008) 2.24 (0.088) C A F E F G H G How to Order Typical Part Marking FVC3100 - BK Part Number • FVC2300 • FVC3100 Packaging Indicator BK = Packaged in tape and reel (1500 pieces per reel) MANUFACTURER’S TRADEMARK* XXXX YYYY MARKING NUMBER V31A = FVC3100 V23A = FVC2300 MANUFACTURING DATE CODE *TRANSITION FROM FULTEC TRADEMARK TO BOURNS TRADEMARK IN 2009. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications FVC Series Voltage Control Devices Packaging Specifications TOP COVER TAPE THICKNESS (t1) 0.10 MAX. (0.004) D2 D1 W1 D EMBOSSED CARRIER TAPE EMBOSSED CAVITY E Po d P1 Symbol A0 F END START W Bo B0 d D Ko SEE NOTE 2 P Ao SEE NOTE 1 D1 D2 t E F K0 P P0 P1 t W Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com W1 Dim. 2.72± 0.10 (0.109 ± 0.004) 5.25± 0.10 (0.210 ± 0.004) 1.55± 0.05 (0.061 ± 0.002) 330.0 (13.0) 50.0 MIN. (1.969)-------13.50 ± 1.0 (0.531 ± 0.039) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 2.66 MAX. (0.105)--------0 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.60 MAX. (0.024)--------. 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724)--------. MM (INCHES) DIMENSIONS: 01/09 COPYRIGHT©2009, BOURNS, INC. LITHO IN U.S.A. e 01/09 FU0903 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications