HCTSM80304BAL-E

nd in g) Features 00 * CO RoH M S PL an IA d NT (P e n Toroid core for high coupling and low AE CQ2 radiation n Complies with IEC 60950-1, IEC 62368-1 and IEC 60664-1 n Reinforced insulation for working voltage of 800 V n Designed for isolation power supplies using TI SN6501 and SN6505B n AEC-Q200 compliant n RoHS compliant* HCT Series - High Clearance and Creepage Distance Transformers General Specifications Electrical Specifications @ 25 °C Primary Inductance @ 100 kHz Leakage Inductance @ 100 kHz / 0.1 V (All Sec. Pins Shorted) L 1-3 (µH) Min. Lk 1-3 (µH) Max. Bourns Part Number** HCTSM80101AAL 250 0.8 250 250 300 HCTSM80403AAL 0.6 HCTSM80809AAL 4:3 0.30 0.30 8:9 0.9 350 0.30 0.50 8:3 0.6 300 HCTSM81017CAL 3:5 1.8 250 HCTSM80910BAL 0.30 3:8 0.8 250 0.30 3:4 0.7 250 HCTSM80803AAL 2:1 0.6 300 0.30 0.30 9 : 10 0.9 0.30 10 : 17 0.42 **Add E or E1 part number suffix - See How to Order. 0.6 (.024) 0.30 0.85 0.20 0.15 0.25 0.25 0.48 12.3 ± 0.5 (.484 ± .020) 15.2 ± 0.5 Materials (.598 ± .020) 6 HCT YYWW 3 SM80101AAL 2 0.15 0.30 Core...............................................Ferrite Wire.... Enameled/triple-insulated copper Terminal Finish....................................Sn Packaging........ 500 pcs. per 13-inch reel Product Dimensions 1 0.20 0.35 HCT HCTSM80305BAL 0.30 1:2 1.2 300 HCTSM80308BAL 1:1 0.6 Sec. (6-4) DCR (W) Max. YYWW HCTSM80201AAL HCTSM80304BAL Pri. (1-3) DCR (W) Max. SM80101AAL HCTSM80102AAL Turns Ratio P(1-3) : S(6-4) Primary (1-3) E*T Constant...11 V-µS min. Rated Current........................350 mA AC Hi-Pot: Primary/Secondary .......................... 4.2k VAC for 1 minute Operating Temperature .................................-40 °C to +125 °C 0.6 (Temperature rise included) (.024) Storage1Temperature (Component) 6 .................................-40 °C to +125 °C 2 Clearance/Creepage Distance 5 of Primary to Secondary......... 8 mm min. 3 4 Level of Insulation......... Reinforced for a working voltage of 800 Vac, Material Group 1, Pollution degree 2, 6.5 ± 0.5 Altitude 2000 m (.256 ± .020) Moisture Sensitivity Level......................1 ESD Classification (HBM)................. N/A 5 Electrical Schematic 4 PRIMARY 6.5 ± 0.5 (.256 ± .020) SECONDARY 1 6 2 5 4 3 12.3 ± 0.5 (.484 ± .020) 15.2 ± 0.5 (.598 ± .020) POLARITY 10.8 ± 0.4 (.425 ± .016) Recommended Layout DIMENSIONS: MM (INCHES) 1.9 (.075) 3.05 (.120) 1.14 (.045) 11.31 (.445) DIMENSIONS: MM (INCHES) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.9 (.075) 10.8 ± (.425 ±  HCT Series - High Clearance and Creepage Distance Transformers Reflow Solder Profile tp TP CRITICAL ZONE T L TO TP RAMP-UP TL tL Temperature TS MAX. TS MIN. ts PREHEAT RAMP-DOWN 25 °C t 25 °C TO PEAK Time Profile Feature Pb-Free Assembly Average Ramp-Up Rate (Ts max to Tp) 3 °C / second max. PREHEAT: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (Tsmin to Tsmax) (ts) 150 °C 200 °C 60~180 seconds TIME MAINTAINED ABOVE: Temperature (TL) Time (tL) 217 °C 60~150 seconds Peak Temperature (Tp) 245-250 °C Time within 5 °C of Actual Peak Temperature (tp) 20~40 seconds Ramp-Down Rate 6 °C / second max. Time 25 °C to Peak Temperature 8 minutes max. Typical Application How to Order VIN SN6501-Q1 4 GND D2 VCC 5 GND D1 T1 3 MBR0520L TP1 VOUT 1 µF 2 1 1 µF HCTSM80101A A L - * Model AEC-Q200 Compliancy Designator RoHS Compliancy Designator Tape & Reel Packaging E = 500 pcs. per 13-inch Reel, 5 Reels per Box, MOQ/Mult: 2500 pcs./2500 pcs. E1 = 500 pcs. per 13-inch Reel, 1 Reel per Box, MOQ/Mult: 500 pcs./500 pcs. MBR0520L Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. HCT Series - High Clearance and Creepage Distance Transformers Efficiency vs. Load Curves* HCTSM80101AAL 90 70 60 60 60 40 30 50 40 30 20 20 10 10 0 0 0 50 100 150 200 250 300 350 Efficiency (%) 70 70 50 HCTSM80304BAL 0 50 50 40 30 300 0 350 200 250 300 50 30 0 350 HCTSM80403AAL 50 100 150 200 250 300 30 20 0 50 100 150 200 250 300 HCTSM80803AAL 0 50 40 30 20 150 200 350 250 300 350 HCTSM80809AAL 60 50 40 30 20 10 0 50 100 150 200 250 300 350 0 0 50 100 150 200 Load Current (mA) HCTSM81017CAL 90 80 100 70 Load Current (mA) HCTSM80910BAL 300 30 80 Load Current (mA) 90 250 50 90 50 0 350 350 Load Current (mA) 10 10 300 40 0 350 Efficiency (%) Efficiency (%) 50 40 250 10 0 60 70 200 20 70 60 150 HCTSM80308BAL Load Current (mA) 80 100 80 40 10 150 50 90 70 20 100 0 Load Current (mA) 60 10 90 Efficiency (%) 250 70 20 50 20 60 Load Current (mA) 80 70 70 60 60 Efficiency (%) Efficiency (%) 200 Efficiency (%) Efficiency (%) Efficiency (%) 70 50 40 30 50 40 30 20 20 10 10 0 150 HCTSM80305BAL 90 60 0 100 80 0 30 Load Current (mA) 80 0 50 40 10 Load Current (mA) 90 HCTSM80201AAL 80 80 Efficiency (%) Efficiency (%) HCTSM80102AAL 90 80 0 50 100 150 200 Load Current (mA) 250 300 350 0 0 50 100 150 200 250 300 350 Load Current (mA) *Measured with circuit in Typical Application, 5 VDC input, 0-350 mA DC load, Ta = 20 °C Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  HCT Series - High Clearance and Creepage Distance Transformers Packaging Specifications 24.5 ± 0.2 (.965 ± .008) 330.0 ± 2.0 (12.992 ± .079) DIA. 2.6 ± 0.3 (.102 ± .012) 21.0 ± 0.8 DIA. (.827 ± .031) 13.2 +0.8/-0.2 (.520 +.031/-.008) DIA. 100.0 ± 2.0 (3.937 ± .079) DIA. DETAIL A A 30.5 (1.201) MAX. 4.00 (.157) END HCT 24.00 (.945) HCT HCT START HCT SM80101AAL SM80101AAL SM80101AAL SM80101AAL YYWW YYWW YYWW YYWW NO COMPONENT 160 (6.300) MIN. 16.00 (.630) NO COMPONENT COMPONENTS USER DIRECTION OF FEED 400 (15.748) MIN. QUANTITY: 500 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 01/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R