S
CO
M
& PL
A E IA
C NT,
CO *
M *H A
PL L
IA O G
NT EN
F
RH7
5
718 0
0S
n Choice of operating currents
oH
n Compliant with AEC-Q200 Rev-D- Stress
Test Qualification for Passive Components
in Automotive Applications
n Operating temperature range up to 125 °C
n Low thermal derating factor
n Higher hold currents at elevated
temperature
*R
C- *R
Q2 oH
00 S
CO and
M
PL
IA
NT
AE
Features
n RoHS compliant* and halogen free**
n Resettable fault protection of general
electronic equipment
n Agency recognition:
MF-RHT Series - High Temperature PTC Resettable Fuses
Electrical Characteristics
Model
MF-RHT050
MF-RHT070
MF-RHT100
MF-RHT200
MF-RHT200/32
MF-RHT300
MF-RHT400
MF-RHT450
MF-RHT500
MF-RHT550
MF-RHT600
MF-RHT650
MF-RHT700
MF-RHT750
MF-RHT800
MF-RHT900
MF-RHT1000
MF-RHT1100
MF-RHT1300
Vmax
Imax
Volts
30
16
30
16
32
16
16
16
16
16
16
16
16
16
16
16
16
16
16
Amps
40
40
40
100
50
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Ihold
Itrip
at 23 °C
Amps
0.5
0.92
0.7
1.4
1.0
1.8
2.0
3.8
2.0
3.8
3.0
6.0
4.0
7.5
4.5
7.8
5.0
9.0
5.5
10.0
6.0
10.8
6.5
12.0
7.0
13.0
7.5
13.1
8.0
15.0
9.0
16.5
10.0
18.5
11.0
20.0
13.0
24.0
Initial
Resistance
at 23 °C
Ohms
Min.
0.48
0.30
0.18
0.045
0.045
0.033
0.024
0.022
0.0175
0.0150
0.0130
0.0110
0.0100
0.0094
0.0080
0.0074
0.0062
0.0055
0.0041
1 Hour (R1)
Post-Trip
Resistance
at 23 °C
Ohms
Max.
1.10
0.80
0.43
0.110
0.110
0.079
0.060
0.054
0.045
0.037
0.032
0.026
0.025
0.022
0.020
0.017
0.015
0.013
0.010
Max. Time
to Trip
at 23 °C
Amps
2.5
3.5
5.2
12.5
12.5
15.0
20.0
22.5
25.0
27.5
30.0
32.5
35.0
37.5
40.0
45.0
50.0
55.0
60.0
Seconds
2.5
4.0
5.0
3.0
3.0
5.0
5.0
3.0
9.0
6.0
5.0
5.5
7.0
7.0
8.0
10.0
9.0
11.0
13.0
Tripped
Power
Dissipation
at 23 °C
Watts
Typ.
0.9
1.4
1.4
1.4
1.4
3.0
3.3
3.6
3.6
3.5
4.1
4.3
4.0
4.5
4.2
5.0
5.3
5.5
6.9
Agency
Recognition
cUL
E174545
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
TÜV
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Pending
Environmental Characteristics
Item
Operating Temperature
Recommended Storage
Passive Aging
Humidity Aging
Thermal Shock
Solvent Resistance
Vibration
Moisture Sensitivity Level (MSL)
ESD Classification
Condition
-40 °C to +85 °C
+40 °C max. / 70 % R.H. max.
+85 °C, 1000 hours
+85 °C, 85 % R.H. 1000 hours
-40 °C to +125 °C, 10 times
MIL-STD-202, Method 215
MIL-STD-883C, Method 2007.1 Condition A
See Note
Class 6 (per AEC-Q200-2, HBM)
Criteria
Test Condition
Verify dimensions and materials
In still air @ 23 °C
5 times Ihold, Vmax, 23 °C
30 min. at Ihold
Vmax, Imax, 100 cycles
Vmax, 48 hours
245 °C ±5 °C, 5 seconds
Accept/Reject Criteria
Per MF physical description
Rmin ≤ R ≤ Rmax
T ≤ max. time to trip (seconds)
No trip
No arcing or burning
No arcing or burning
95 % min. coverage
±5 % typical resistance change
±5 % typical resistance change
±10 % typical resistance change
No change (marking still legible)
No change (Rmin < R < R1max)
Test Procedures and Requirements
Item
Visual/Mechanical
Resistance
Time to Trip
Hold Current
Trip Cycle Life
Trip Endurance
Solderability
WARNING Cancer and Reproductive Harm
www.P65Warnings.ca.gov
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the
Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm
or less.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last
page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-RHT Series - High Temperature PTC Resettable Fuses
Thermal Derating Table - Ihold (Amps)
Model
MF-RHT050
MF-RHT070
MF-RHT100
MF-RHT200
MF-RHT200/32
MF-RHT300
MF-RHT400
MF-RHT450
MF-RHT500
MF-RHT550
MF-RHT600
MF-RHT650
MF-RHT700
MF-RHT750
MF-RHT800
MF-RHT900
MF-RHT1000
MF-RHT1100
MF-RHT1300
-40 °C
0.68
0.95
1.36
2.71
2.71
4.07
5.57
6.1
6.78
7.47
8.20
8.8
9.51
10.2
10.87
12.21
13.6
14.94
17.7
-20 °C
0.62
0.87
1.24
2.49
2.49
3.74
5.11
5.6
6.22
6.86
7.50
8.1
8.73
9.4
9.98
11.19
12.5
13.72
16.3
0 °C
0.56
0.79
1.13
2.26
2.26
3.41
4.65
5.1
5.67
6.24
6.80
7.4
7.95
8.6
9.08
10.16
11.4
12.49
14.8
Ambient Operating Temperature
23 °C
0.5
0.7
1.0
2.0
2.0
3.0
4.0
4.5
5.0
5.5
6.0
6.5
7.0
7.5
8.0
9.0
10.0
11.0
13.0
40 °C
0.44
0.62
0.89
1.77
1.77
2.65
3.62
4.0
4.44
4.85
5.3
5.7
6.17
6.6
7.06
7.97
8.8
9.7
11.4
50 °C
0.4
0.56
0.80
1.60
1.60
2.40
3.29
3.6
4
4.41
4.9
5.3
5.61
6.1
6.41
7.20
8.10
8.82
10.5
How to Order
60 °C
0.36
0.51
0.73
1.46
1.46
2.21
3.01
3.3
3.67
4.04
4.4
4.8
5.15
5.6
5.88
6.56
7.40
8.09
9.6
70 °C
0.34
0.47
0.67
1.34
1.34
2.00
2.73
3.0
3.33
3.66
4
4.3
4.66
5.0
5.33
6.04
6.60
7.32
8.6
85 °C
0.28
0.39
0.56
1.11
1.11
1.66
2.27
2.5
2.78
3.05
3.3
3.6
3.88
4.1
4.43
5.01
5.50
6.09
7.2
125 °C
0.12
0.17
0.24
0.49
0.49
0.74
1.01
1.1
1.22
1.36
1.5
1.6
1.73
1.9
1.97
2.19
2.5
2.71
3.3
Typical Part Marking
MF - RHT 200 /32 - __ - 14
Multifuse® Product Designator
Series
RHT = High Temperature Radial Leaded Component
Hold Current, Ihold
050 - 1300 (0.50 - 13.00 Amps)
Higher Voltage Option
Blank = Standard Voltage
/32 = 32 Volts
Packaging Options
- 0 = Bulk Packaging
- 2 = Tape & Reel*
- AP = Ammo-Pak*
Part Number Suffix Option
- 14 = Kinked Leads in Place of Std. Straight Leads
- 17 = Straight Leads in Place of Std. Kinked Leads
Represents total content. Layout may vary.
PART
IDENTIFICATION
MANUFACTURER'S
TRADEMARK
RH750
7180S
DATE CODE
(FIRST DIGIT =
LAST DIGIT OF YEAR;
NEXT THREE DIGITS =
DAY OF YEAR)
EXAMPLE: 7180 = 2017 DAY 180
COUNTRY OF
MANUFACTURE
(S = CHINA)
*Packaged per EIA-468
Packaging Quantity
Packaging options
Bulk
Tape & Reel
Ammo-Pack
Models
MF-RHT050 ~ MF-RHT800
MF-RHT900 ~ MF-RHT1300
MF-RHT050 ~ MF-RHT400
MF-RHT450 ~ MF-RHT700
MF-RHT750 ~ MF-RHT1300
MF-RHT050 ~ MF-RHT400
MF-RHT450 ~ MF-RHT900
MF-RHT1000 ~ MF-RHT1300
Unit Quantity (Pcs.)
500
250
3000
1500
1000
2000
1000
500
Unit
Bag
Reel
Pack
Specifications are subject to change without notice.
Users should verify actual device performance in their
specific applications.
The products described herein and this document are
subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/
docs/legal/disclaimer.pdf.
MF-RHT Series - High Temperature PTC Resettable Fuses
Product Dimensions
Model
MF-RHT050
MF-RHT070
MF-RHT100
MF-RHT200
MF-RHT200/32
MF-RHT300
MF-RHT400
MF-RHT450
MF-RHT500
MF-RHT550
MF-RHT600
MF-RHT650
MF-RHT700
MF-RHT750
MF-RHT800
MF-RHT900
MF-RHT1000
MF-RHT1100
MF-RHT1300
A
Max.
7.40
(0.291)
6.86
(0.27)
9.70
(0.382)
9.4
(0.37)
9.4
(0.37)
8.80
(0.35)
10.0
(0.394)
10.4
(0.41)
11.2
(0.441)
11.2
(0.441)
11.2
(0.441)
12.7
(0.50)
14.0
(0.55)
14.0
(0.55)
16.5
(0.65)
16.5
(0.65)
17.5
(0.689)
21.0
(0.65)
23.5
(0.925)
B
Max.
12.7
(0.500)
10.8
(0.425)
13.6
(0.535)
14.0
(0.55)
14.0
(0.55)
13.8
(0.55)
15.0
(0.591)
15.6
(0.61)
18.9
(0.744)
18.9
(0.744)
21.0
(0.827)
22.2
(0.88)
21.9
(0.862)
21.9
(0.862)
22.5
(0.88)
25.7
(1.012)
26.7
(0.51)
26.1
(0.88)
28.7
(1.17)
Nom.
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
5.1
(0.201)
10.2
(0.402)
10.2
(0.402)
10.2
(0.402)
C
Tol. ±
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
0.7
(0.028)
D
Min.
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
7.6
(0.30)
E
Max.
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.0
(0.12)
3.6
(0.14)
F
Nom.
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.51
(0.020)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
0.81
(0.032)
1.0
(0.040)
Physical Characteristics
Style
Material
3
Sn/CuFe
1
Sn/CuFe
3
Sn/CuFe
3
Sn/CuFe
3
Sn/CuFe
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
2
Sn/Cu
DIMENSIONS:
A
A
E
A
E
E
B
B
MM
(INCHES)
B
Also available with kinked and straight leads in
place of standard leads (see How to Order).
D
D
D
C
F
C
F
C
F
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-RHT Series - High Temperature PTC Resettable Fuses
Typical Time to Trip at 23 ˚C
MF-RHT600
MF-RHT550
MF-RHT500
MF-RHT450
MF-RHT400
MF-RHT300
MF-RHT200, MF-RHT200/32
MF-RHT100
MF-RHT650
MF-RHT700
MF-RHT750
MF-RHT800
MF-RHT900
MF-RHT1000
MF-RHT1100
MF-RHT1300
1000
MF-RHT070
100
Time to Trip (Seconds)
MF-RHT050
10
1
0.1
0.01
1
10
100
Fault Current (Amps)
The Time to Trip curves represent typical performance of a device in a simulated application environment.
Actual performance in specific customer applications may differ from these values due to the influence of other variables.
MF-RHT SERIES, REV. R, 07/20
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-RHT Series Tape and Reel Specifications
Devices taped using EIA-468/IEC 60286-2 standards. See table below and figures for details.
Dimension Description
EIA
Mark
Dimensions
Tolerance
18 -0.5/+1.0
Carrier tape width
W W
(.709) (-0.02/+.039)
5
Hold down tape width
W
min.
W0
0
(.197)
Hold down tape
IEC
Mark
No protrusion
3
max.
Adhesive tape position
W2 W2
(.118)
9 -0.5/+0.75
Sprocket hole position
W1 W1
(.354)
(-0.02/+0.03)
4 ±0.2
Sprocket hole diameter
D0 D0
(.157) (±.0078)
18 ~ 20
Height to seating plane (straight lead)
H H
(.709 ~ .787)
16 ±0.5
Height to seating plane (formed lead)
H0 H0
(.63) (±.02)
38.5
Overall height above abscissa
H1 H1
max.
(1.516)
11
Cutout Length
L
max.
(.433)
12.7 ±0.3
Sprocket hole pitch
P0 P0
(0.5) (±.012)
12.7
±0.3
Device pitch: MF-RHT050 ~ MF-RHT400
P P
(0.5) (±.012)
25.4
±0.6
Device pitch: MF-RHT450 ~ MF-RHT1300
P P
(1.0)
(±.024)
±1
Pitch tolerance
20 consecutive
(±.039)
0.9
Composite tape thickness
t t
max.
(.035)
2.0
Overall tape and lead thickness: MF-RHT050 ~ MF-RHT200/32
t1 t1
max.
(0.079)
2.3
Overall tape and lead thickness: MF-RHT300 ~ MF-RHT1300
t1 t1
max.
(0.091)
±0.3
Splice sprocket hole alignment
0
(±.012)
±1.0
Front-to-back deviation
Δh
Δh 0
(±.039)
±1.3
Side-to-side deviation
Δp
Δp 0
(±.051)
3.81 ±0.7
Ordinate to adjacent component lead: MF-RHT050 ~ MF-RHT900
P1 P1
(0.150) (±0.028)
7.62 ±0.7
Ordinate to adjacent component lead: MF-RHT1000 ~ MF-RHT1300
P1 P1
(0.300) (±0.028)
5.08 +0.6/-0.2
Lead spacing: MF-RHT050 ~ MF-RHT900
F F
(0.2) (+0.024/-0.008)
10.2 +0.6/-0.2
Lead spacing: MF-RHT1000 ~ MF-RHT1300
F F
(0.4) (+0.024/-0.008)
— Continued on next page —
DIMENSIONS:
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
MF-RHT Series Tape and Reel Specifications
Dimension Description
IEC
Mark
EIA
Mark
Dimensions
Tolerance
62.0
Reel width including flanges and hub
W4 w2
max.
(2.44)
Dimension between flanges (measured at hub)
W3 w1
allow proper reeling and unreeling
370.0
Reel diameter
A a
max.
(14.57)
4.75 ±3.25
Space between flanges (at hub, excluding device)
(.187) (±.128)
26.0 ±12.0
Arbor hole diameter
C
c
(1.024) (±.472)
p
h
h
80
Core diameter
N n
min.
(3.15)
62 372 372
Box dimensions
max.
(2.44) (14.6) (14.6)
Reference plane
Consecutive missing places
P1
H1
3
W2
F
Empty places per reel
Taped Component Dimensions per EIA Mark h
Figure 1
A
L
Not specified
H0
B
W0
h
P1
H1
W2
F
A
L
H0
B
W0
P0
D0
max.
H1
H
W1
W
Reference
plane
D0
P0
p
p
p
User direction of feed
Cross section A - B
t1
t
H1
H
W1
W
User direction of feed
t1
Cross section A - B
t
Reel Dimensions - per EIA Mark Figure 2
Reel
Upper side
n
a
Tape
User
direction
of
feed
Lower side
c
Reel
w1
w2
Upper side
n
MM
Tape
(INCHES)
DIMENSIONS:
User
Specifications are subject to change without notice.
direction
Users should verify actual device performance in their specific applications.
a
of of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page
feed
c
Lower side
Bourns
PPTC Resettable
Fuses
3312
- ®2 Multifuse
mm SMD® Trimming
Potentiometer
Application Notice
• Users are responsible for independent and adequate evaluation of Bourns® Multifuse® Polymer PTC devices in the user’s
application, including the PPTC device characteristics stated in the applicable data sheet.
•
Polymer PTC devices must not be allowed to operate beyond their stated maximum ratings. Operation in excess of such
maximum ratings could result in damage to the PTC device and possibly lead to electrical arcing and/or fire. Circuits with
inductance may generate a voltage above the rated voltage of the polymer PTC device and should be thoroughly evaluated
within the user’s application during the PTC selection and qualification process.
• Polymer PTC devices are intended to protect against adverse effects of temporary overcurrent or overtemperature
conditions up to rated limits and are not intended to serve as protective devices where overcurrent or overvoltage conditions
are expected to be repetitive or prolonged.
•
In normal operation, polymer PTC devices experience thermal expansion under fault conditions. Thus, a polymer PTC
device must be protected against mechanical stress, and must be given adequate clearance within the user’s application to
accommodate such thermal expansion. Rigid potting materials or fixed housings or coverings that do not provide adequate
clearance should be thoroughly examined and tested by the user, as they may result in the malfunction of polymer PTC
devices if the thermal expansion is inhibited.
• Exposure to lubricants, silicon-based oils, solvents, gels, electrolytes, acids, and other related or similar materials may
adversely affect the performance of polymer PTC devices.
•
Aggressive solvents may adversely affect the performance of polymer PTC devices. Conformal coating, encapsulating,
potting, molding, and sealing materials may contain aggressive solvents including but not limited to xylene and toluene,
which are known to cause adverse effects on the performance of polymer PTCs. Such aggressive solvents must be
thoroughly cured or baked to ensure their complete removal from polymer PTCs to minimize the possible adverse effect
on the device.
• Recommended storage conditions should be followed at all times. Such conditions can be found on the applicable data
sheet and on the Multifuse® Polymer PTC Moisture/Reflow Sensitivity Classification (MSL) note:
https://www.bourns.com/docs/RoHS-MSL/msl_mf.pdf
MFAN 12/18
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R