P4SMA39CA-Q

CO LO & MP LI GE AN N T FR EE *R oH S ** HA Features Applications ■ Surface Mount SMA package ■ Protection of power buses ■ Breakdown Voltage: 6.8 to 250 volts ■ Protection of I/O interfaces ■ Power Dissipation: 400 watts ■ Overvoltage transient protection ■ RoHS compliant* and halogen free** ■ Telecom, computer, industrial and consumer electronics applications ■ AEC-Q101 compliant*** P4SMA-Q Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 250 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 400 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 40 Amps Instantaneous Forward Voltage @ 25 A (For Unidirectional Units Only) VF 3.5 Volts Operating Temperature Range TJ -55 to +150 °C TSTG -55 to +150 °C Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Mounted on 5.0 mm x 5.0 mm copper pad to each terminal. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order P4SMA 15 CA - Q Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Series P4SMA = SMA/DO-214AC Breakdown Voltage 6.8 to 250 = 6.8 to 250 VBR (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch Reel (5000 pcs.) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. *** Q suffix for applications requiring appropriate AEC-Q101 compliance for electronic limiters. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part No. Marking Bidirectional Device Part No. Breakdown Voltage VBR (Volts) Marking Min. @ IT Max. (mA) Maximum Maximum Maximum Maximum Working Maximum Clamping Peak Clamping Peak Peak Reverse Voltage Pulse Voltage Pulse Reverse Leakage @ Ipp Current @ Ipp Current Voltage @ VRWM (10/1000 μs) (10/1000 μs) (8/20 μs) (8/20 μs) VRWM (V) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) P4SMA6.8A-Q 6V8AQ P4SMA6.8CA-Q 6V8CQ 6.45 7.14 10 5.8 1000 10.5 39 14 195 P4SMA7.5A-Q 7V5AQ P4SMA7.5CA-Q 7V5CQ 7.13 7.88 10 6.4 500 11.3 36.3 14.7 181.5 P4SMA8.2A-Q 8V2AQ P4SMA8.2CA-Q 8V2CQ 7.79 8.61 10 7.02 200 12.1 33.9 15.7 169.5 P4SMA9.1A-Q 9V1AQ P4SMA9.1CA-Q 9V1CQ 8.65 9.55 1 7.78 50 13.4 30.6 17.4 153.0 P4SMA10A-Q 10AQ P4SMA10CA-Q 10CQ 9.5 10.5 1 8.55 10 14.5 28.3 18.9 141.5 P4SMA11A-Q 11AQ P4SMA11CA-Q 11CQ 10.5 11.6 1 9.4 5 15.6 26.3 20.3 131.5 P4SMA12A-Q 12AQ P4SMA12CA-Q 12CQ 11.4 12.6 1 10.2 5 16.7 24.6 21.7 123.0 P4SMA13A-Q 13AQ P4SMA13CA-Q 13CQ 12.4 13.7 1 11.1 1 18.2 22.5 23.7 112.5 P4SMA15A-Q 15AQ P4SMA15CA-Q 15CQ 14.3 15.8 1 12.8 1 21.2 19.3 27.6 96.5 P4SMA16A-Q 16AQ P4SMA16CA-Q 16CQ 15.2 16.8 1 13.6 1 22.5 18.2 29.3 91.0 P4SMA18A-Q 18AQ P4SMA18CA-Q 18CQ 17.1 18.9 1 15.3 1 25.5 16.1 33.2 80.5 P4SMA20A-Q 20AQ P4SMA20CA-Q 20CQ 19 21 1 17.1 1 27.7 14.8 36.0 74.0 P4SMA22A-Q 22AQ P4SMA22CA-Q 22CQ 20.9 23.1 1 18.8 1 30.6 13.4 39.8 67.0 P4SMA24A-Q 24AQ P4SMA24CA-Q 24CQ 22.8 25.2 1 20.5 1 33.2 12.3 43.2 61.5 P4SMA27A-Q 27AQ P4SMA27CA-Q 27CQ 25.7 28.4 1 23.1 1 37.5 10.9 48.8 54.5 P4SMA30A-Q 30AQ P4SMA30CA-Q 30CQ 28.5 31.5 1 25.6 1 41.4 9.9 53.8 49.5 P4SMA33A-Q 33AQ P4SMA33CA-Q 33CQ 31.4 34.7 1 28.2 1 45.7 9 59 45 P4SMA36A-Q 36AQ P4SMA36CA-Q 36CQ 34.2 37.8 1 30.8 1 49.9 8.2 64.9 41.0 P4SMA39A-Q 39AQ P4SMA39CA-Q 39CQ 37.1 41 1 33.3 1 53.9 7.6 70.1 38.0 P4SMA43A-Q 43AQ P4SMA43CA-Q 43CQ 40.9 45.2 1 36.8 1 59.3 6.9 77.1 34.5 P4SMA47A-Q 47AQ P4SMA47CA-Q 47CQ 44.7 49.4 1 40.2 1 64.8 6.3 84.2 31.5 P4SMA51A-Q 51AQ P4SMA51CA-Q 51CQ 48.5 53.6 1 43.6 1 70.1 5.8 91.1 29.0 P4SMA56A-Q 56AQ P4SMA56CA-Q 56CQ 53.2 58.8 1 47.8 1 77 5.3 100.1 26.5 P4SMA62A-Q 62AQ P4SMA62CA-Q 62CQ 58.9 65.1 1 53 1 85 4.8 110.5 24.0 P4SMA68A-Q 68AQ P4SMA68CA-Q 68CQ 64.6 71.4 1 58.1 1 92 4.5 119.6 22.5 P4SMA75A-Q 75AQ P4SMA75CA-Q 75CQ 71.3 78.8 1 64.1 1 103 4 134 20 P4SMA82A-Q 82AQ P4SMA82CA-Q 82CQ 77.9 86.1 1 70.1 1 113 3.6 146.9 18.0 P4SMA91A-Q 91AQ P4SMA91CA-Q 91CQ 86.5 95.5 1 77.8 1 125 3.3 162.5 16.5 P4SMA100A-Q 100AQ P4SMA100CA-Q 100CQ 95 105 1 85.5 1 137 3 178 15 P4SMA110A-Q 110AQ P4SMA110CA-Q 110CQ 105 116 1 94 1 152 2.7 197.6 13.5 P4SMA120A-Q 120AQ P4SMA120CA-Q 120CQ 114 126 1 102 1 165 2.5 214.5 12.5 P4SMA130A-Q 130AQ P4SMA130CA-Q 130CQ 124 137 1 111 1 179 2.3 232.7 11.5 P4SMA150A-Q 150AQ P4SMA150CA-Q 150CQ 143 158 1 128 1 207 2 269 10 P4SMA160A-Q 160AQ P4SMA160CA-Q 160CQ 152 168 1 136 1 219 1.9 284.7 9.5 P4SMA170A-Q 170AQ P4SMA170CA-Q 170CQ 162 179 1 145 1 234 1.8 304.2 9.0 P4SMA180A-Q 180AQ P4SMA180CA-Q 180CQ 171 189 1 154 1 246 1.7 319.8 8.5 P4SMA200A-Q 200AQ P4SMA200CA-Q 200CQ 190 210 1 171 1 274 1.5 356.2 7.5 P4SMA220A-Q 220AQ P4SMA220CA-Q 220CQ 209 231 1 185 1 328 1.3 426.4 6.5 P4SMA250A-Q 250AQ P4SMA250CA-Q 250CQ 237 263 1 214 1 344 1.2 447.2 6.0 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA-Q Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 60 Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 50 40 30 20 0 0 0 25 75 50 100 125 150 175 Pulse Width 8.3 ms Single Half Sine-Wave 10 200 1 2 5 10 20 50 100 Number of Cycles at 60 Hz Ambient Temperature (°C) Pulse Waveform Typical Junction Capacitance 10000 tr = 10 T J = 25 ° C µsec. Pulse Width (td) is defined as the point where the peak current decays to 50 % of I PPM Peak Value IPPM 100 CJ - Junction Capacitance (pF) IPPM - Peak Pulse Current, % IRSM 150 Half Value- I PPM 2 50 0 0 10/1000 µsec. Waveform as defined by R.E.A. Bidirectional V = 0 V 1000 Unidirectional V = 0 V Unidirectional @VR 100 10 T J = 25 °C f = 1.0 MHz Vsig = 50 mVp-p td 1.0 2.0 3.0 4.0 Bidirectional @VR 1 t - Time (ms) 1 10 100 1000 V BR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 1.0 1.0 TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 0.1 0.1 µs 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) PP, Peak Power (KW) 10 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA-Q Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint CATHODE BAND (FOR UNIDIRECTIONAL PRODUCTS ONLY) a A B C b c G Dimension a (Max.) F H D E b (Min.) c (Min.) Dimension A B C D E F G H SMA (DO-214AC) 3.99 - 4.50 (0.157 - 0.177) 2.54 - 2.79 (0.100 - 0.110) 1.25 - 1.65 (0.049 - 0.065) 0.15 - 0.31 (0.006 - 0.012) 4.93 - 5.28 (0.194 - 0.208) 0.203 MAX. (0.008) 1.98 - 2.29 (0.078 - 0.090) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: MM (INCHES) SMA (DO-214AC) 2.70 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B Typical Part Marking MANUFACTURER’S TRADEMARK YWW XXXXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. P4SMA-Q Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation ....... ....... C Device Leader ....... ....... ....... ....... 10 pitches (min.) W1 Start DIMENSIONS: 10 pitches (min.) Devices are packed in accordance with EIA 481 standard specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel MM (INCHES) -- SMA (DO-214AC) 13-Inch Reel 2.90 ± 0.20 (0.114 ± 0.008) 5.50 ± 0.20 (0.217 ± 0.008) 2.26 ± 0.20 (0.089 ± 0.008) 1.50 ± 0.10 (0.061 ± 0.004) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724) 5000 REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL