PDB185-GTR13-503B0

T PL IA N M CO Features ■ Split knurled or plain shaft options *R oH S ■ DPDT latching-push switch ■ Metal bushing and shaft ■ Carbon element ■ Linear and audio taper options ■ RoHS compliant* PDB185-GTR - 17 mm Guitar Potentiometer w/Latching-Push Switch Electrical Characteristics Taper.................................. Linear, audio Standard Resistance Range ........................10K ohms to 1M ohms Standard Resistance Tolerance....±20 % Residual Resistance................ 2 Ω max. Product Dimensions PDB185-GTR01 7.0 ± 0.3 (.276 ± .012) 6.0 ± 0.3 (.236 ± .012) Environmental Characteristics Operating Temperature ..................................-10 °C to +70 °C Power Rating Linear ..................................... 0.1 watt Audio .................................... 0.05 watt Maximum Operating Voltage Linear .........................................150 V Audio ..........................................100 V Sliding Noise........................47 mV max. Moisture Sensitivity Level ..................... 1 ESD Classification (HBM)................. N/A Mechanical Characteristics Mechanical Angle ................... 300 ° ±5 ° Rotational Torque ...........20 to 150 g-cm Stop Strength..................... 8 kg-cm min. Rotational Life...................15,000 cycles Switch Life ................. 10,000 actuations Switch Type .................................. DPDT Switch Travel ..................... 4.0 ± 0.8 mm Switch Operating Force ..........2 kgf max. Switch Operating Speed................1 sec. Soldering Condition Wave ...........260 °C max., 5 sec. max. Manual ........350 °C max., 3 sec. max. Hardware .............. two mounting nuts supplied per potentiometer How To Order WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov 1.0 ± 0.3 (.039 ± .012) DIMENSIONS: MM (INCHES) (18 TEETH) 0.5 ± 0.3 C (.020 ± .012) 3/8 ”-32 UNEF-2A THREAD 6.0 ± 0.3 (.236 ± .012) DIA. PDB185-GTR02 9.5 ± 0.5 (.374 ± .020) 1.0 ± 0.3 (.039 ± .012) 16.8 ± 0.5 (.661 ± .020) 0.5 ± 0.3 C (.020 ± .012) 3/8 ”-32 UNEF-2A THREAD SWITCH TERMINAL DETAIL 1.0 ± 0.3 (.039 ± .012) MAX. 4.0 +0.0/-0.8 (.157 +.000/-.031) SWITCH TRAVEL 19.0 ± 0.5 (.748 ± .020) 27.3 ± 0.5 (1.075 ± .020) 2.0 ± 0.3 (.079 ± .012) 6.0 ± 0.3 (.236 ± .012) 7.0 ± 0.3 (.276 ± .012) 1.0 ± 0.3 (.039 ± .012) 6.35 +0.0/-0.1 (.250 +.000/-.004) VR TERMINAL DETAIL 4.0 ± 0.3 (.157 ± .012) 4.0 ± 0.3 (.157 ± .012) 1.0 ± 0.3 (.039 ± .012) 2.0 ± 0.3 (.079 ± .012) SHAFT SHOWN IN FULL CCW POSITION 60 ° PDB185 - GTR 11 - 504 A2 Model Guitar Pot Designator Configuration • 01 = Knurled Shaft (18 Tooth) / Solder Lugs • 02 = Slotted Shaft / Solder Lugs • 04 = Slotted Shaft/PC Pins • 11 = Knurled Shaft (24 Tooth) / Solder Lugs • 13 = Knurled Shaft (24 Tooth) / PC Pins • 31 = Knurled Shaft (18 Tooth) / Solder Lugs, Long Bushing • 32 = Slotted Shaft / Solder Lugs / Long Bushing • 33 = Knurled Shaft (24 Tooth) / Solder Lugs, Long Bushing Resistance Code (See table) Resistance Taper (See taper charts) 4.0 +0.8/-0.5 (.157 +.031/-.020) SWITCH TRAVEL 19.0 ± 0.5 (.748 ± .020) 9.5 ± 0.3 (.374 ± .012) 3.6 ± 0.3 (.142 ± .012) 2.2 ± 0.3 (.087 ± .012) 3.0 ± 0.3 (.118 ± .012) DIA. 2.0 ± 0.3 (.079 ± .012) 3.0 ± 0.3 (.118 ± .012) 18.0 ± 0.5 (.709 ± .020) 8.4 ± 0.3 (.331 ± .012) 12.0 ± 0.5 (.472 ± .020) 2.0 ± 0.3 (.079 ± .012) 13.5 ± 1.0 (.531 ± .039) 1 3 2 2 5.0 ± 0.3 (.197 ± .012) 3 1 PINOUT FOR “A” AND “B” TAPERS PINOUT FOR “C” TAPER 5.0 ± 0.3 (.197 ± .012) 15.0 ± 0.5 (.591 ± .020) 5.0 ± 0.3 (.197 ± .012) 2.6 ± 0.3 (.102 ± .012) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PDB185-GTR - 17 mm Guitar Potentiometer w/Latching-Push Switch Product Dimensions (Continued) PDB185-GTR04 SHAFT SHOWN IN FULL CCW POSITION 27.3 ± 0.5 (1.075 ± .020) 2.0 ± 0.3 (.079 ± .012) 6.0 ± 0.3 (.236 ± .012) 9.5 ± 0.5 (.374 ± .020) 1.0 ± 0.3 (.039 ± .012) 8.4 ± 0.3 (.331 ± .012) 1.0 ± 0.3 (.039 ± .012) 0.5 ± 0.3 C 3/8 “-32 (.020 ± .012) UNEF-2A THREAD 16.8 ± 0.5 (.661 ± .020) 60 ° 4.0 +0.0/-0.8 (.157 +.000/-.031) SWITCH TRAVEL 19.0 ± 0.5 (.748 ± .020) 6.35 +0.0/-0.1 (.250 +.000/-.004) 12.5 ± 0.5 (.492 ± .020) 1 3 1.0 ± 0.3 (.039 ± .012) 4.0 ± 0.3 MAX. (.157 ± .012) 2 2 4.0 ± 0.3 (.157 ± .012) 5.0 ± 0.3 (.197 ± .012) 4.0 ± 0.3 (.157 ± .012) 3 1 PINOUT FOR “A” AND “B” TAPERS PINOUT FOR “C” TAPER 1.0 ± 0.2 (.039 ± .008) 15.0 ± 0.5 (.591 ± .020) 18.0 ± 0.5 (.709 ± .020) 12.0 ± 0.5 (.472 ± .020) PWB MOUNTING DETAIL 4.0 ± 0.1 (.157 ± .004) 5.3 ± 0.1 (.209 ± .004) 4.0 ± 0.1 (.157 ± .004) 10.0 ± 0.1 (.394 ± .004) 1 2 3 4 5 6 MOUNTING SURFACE 3.8 ± 0.1 (.150 ± .004) 3 2.0 ± 0.3 (.079 ± .012) 2 5.0 ± 0.1 (.197 ± .004) 1 1.5 ± 0.1 (.059 ± .004) DIA. 7 PLCS. 1.2 +0.2 / -0.0 (.047 +.008/-.000) DIA. 3 PLCS. 5.0 ± 0.1 (.197 ± .004) 2.6 ± 0.3 (.102 ± .012) PDB185-GTR11, PDB185-GTR13 19.0 ± 0.5 (.748 ± .020) 9.5 ± 0.3 (.374 ± .012) 4.0 +0.0/-0.8 (.157 +.000/-.031) SWITCH TRAVEL 8.4 ± 0.3 (.331 ± .012) DIMENSIONS: 6.0 ± 0.3 (.236 ± .012) (24 TEETH) 7.0 ± 0.3 (.276 ± .012) 3/8 “-32 UNEF-2A THREAD 1.0 ± 0.3 (.039 ± .012) 6.0 ± 0.3 DIA. (.236 ± .012) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 13.5 ± 1.0 (.531 ± .039) 1 3 2 2 5.0 ± 0.3 (.197 ± .012) 3 1 PINOUT FOR “A” AND “B” TAPERS PINOUT FOR “C” TAPER 5.0 ± 0.3 (.197 ± .012) 15.0 ± 0.5 (.591 ± .020) MM (INCHES) PDB185-GTR - 17 mm Guitar Potentiometer w/Latching-Push Switch Product Dimensions (Continued) Circuit PDB185-GTR31 4.0 +0.0/-0.8 (.157 +.000/-.031) SWITCH TRAVEL 6.0 ± 0.3 (.236 ± .012) 27.5 ± 0.5 (1.083 ± .020 19.0 ± 0.5 (.748 ± .020) 1 2 3 (18 TEETH) Switch Circuit 3/8 “-32 UNEF-2A THREAD 1.0 ± 0.3 (.039 ± .012) 7.0 ± 0.3 (.276 ± .012) 6.0 ± 0.3 DIA. (.236 ± .012) 1 2 3 4 5 6 PDB185-GTR32 27.5 ± 0.5 (1.083 ± .020 19.0 ± 0.5 (.748 ± .020) 4.0 +0.0/-0.8 (.157 +.000/-.031) SWITCH TRAVEL Hardware 1.0 ± 0.3 (.039 ± .012) 12.6 ± 0.5 (.496 ± .020) 3/8 “-32 UNEF-2A THREAD 0.5 ± 0.3 C (.020 ± .012) 14.0 ± 0.5 (.551 ± .020) DIA. 14.3 (.563) 1.0 ± 0.3 (.039 ± .012) DIA. 2.4 ± 0.3 (.094 ± .012) 6.35 +0/-0.1 (.250 +.000/-.004) T= 0.5 ± 0.3 (.020 ± .012) DIA. 10.0 ± 0.5 (.394 ± .020) 3/8 ”-32 UNEF-2A THREAD NUT WASHER PDB185-GTR33 SWITCH TRAVEL 4.0 +0.0/-0.8 (.157 +.000/-.031) 27.5 ± 0.5 (1.083 ± .020 19.0 ± 0.5 (.748 ± .020) 6.0 ± 0.3 (.236 ± .012) (24 TEETH) 0.5 (.020) 1.0 ± 0.3 (.039 ± .012) 6.0 ± 0.3 DIA. (.236 ± .012) C 3/8 “-32 UNEF-2A THREAD 7.0 ± 0.3 (.276 ± .012) DIMENSIONS: Standard Resistance Table Resistance (Ohms) 10,000 25,000 50,000 100,000 250,000 300,000 500,000 1,000,000 Resistance Code 103 253 503 104 254 304 504 105 Typical Part Marking MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PDB185-GTR - 17 mm Guitar Potentiometer w/Latching-Push Switch Tapers Derating Curve Rating Power Ratio (%) A2 Taper 100 90 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 80 60 40 33 20 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (°C) 100 Rotational Travel (%) B0 Taper 100 90 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 Rotational Travel (%) C2 Taper 100 90 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 Rotational Travel (%) 70 80 90 100 Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 10/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL