PEC09-2315F-N0015

T PL IA N M CO Features ■ Push switch option *R oH S ■ Compact, rugged design ■ High reliability ■ Metal bushing/shaft PEC09 Series - 9 mm Incremental Encoder Electrical Characteristics Output....................................................................................................................................................................................................2-bit quadrature code Closed Circuit Resistance ...........................................................................................................................................................................3 ohms maximum Contact Rating.............................................................................................................................................................................................. 10 mA @ 5 VDC Insulation Resistance ...................................................................................................................................................................100 megohms @ 250 VDC Dielectric Withstanding Voltage Sea Level............................................................................................................................................................................................... 300 VAC minimum Electrical Travel .....................................................................................................................................................................................................Continuous Contact Bounce (15 RPM).........................................................................................................................................................................5.0 ms maximum** RPM (Operating) ..............................................................................................................................................................................................60 maximum** Environmental Characteristics Operating Temperature Range ......................................................................................................................................-10 °C to +70 °C (+14 °F to +158 °F) Storage Temperature Range ..........................................................................................................................................-40 °C to +85 °C (-40 °F to +185 °F) Humidity................................................................................................................................................................. MIL-STD-202, Method 103B, Condition B Rotational Life.................................................................................................................................................................................... 30,000 cycles minimum IP Rating..........................................................................................................................................................................................................................IP 40 Mechanical Characteristics Mechanical Angle ......................................................................................................................................................................................... 360 ° continuous Torque Running/Detent............................................................................................................................................................ 30 to 200 gf.cm (0.42 to 2.7 oz.-in.) Mounting.......................................................................................................................................................................10.0 kgf.cm (8.67 lb.-in.) maximum Terminal Bend Strength .................................................................................................................................................................................300 gf (10.6 ozf) Shaft Push-Pull Strength ................................................................................................................................................................................... 10 kgf (22 lbf) Weight ............................................................................................................................................................................................ 5 gm (0.17 oz.) maximum Terminals ................................................................................................................................................................................. Printed circuit board terminals Soldering Condition Wave Soldering ...................................................................................... Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C max. for 3-5 seconds Hand Soldering................................................................................................................................................................................. Not recommended Hardware ....................................................................................................................... One flat washer and one mounting nut supplied with each encoder Switch Characteristics Switch Type ....................................................................................................................................................................Contact Push ON Momentary SPST Switch Life ......................................................................................................................................................................................... 20,000 cycles minimum Power Rating (Resistive Load) ..................................................................................................................................................................... 10 mA at 5 V DC Switch Travel .............................................................................................................................................................................................. See How to Order Switch Actuation Force ...............................................................................................................................................................300 ± 200 gf (10.6 ± 7.0 ozf) How To Order Quadrature Output Table PEC09 - 2 0 20 F - S 0012 Model Terminal Configuration 2 = PC Pin Vertical/Side Exit Detent Option 0 = No Detents (12, 15 pulses) 1 = 12 Detents (12 pulses) 2 = 24 Detents (12 pulses) 3 = 30 Detents (15 pulses) Standard Shaft Length 15 = 15.0 mm 20 = 20.0 mm 25 = 25.0 mm Shaft Style F = Metal Flatted Shaft K = Metal Knurled Shaft Switch Configuration N = No Switch S = Push Momentary (0.5 mm stroke) T = Push Momentary (1.5 mm stroke) Resolution 0012 = 12 Pulses per 360 ° Rotation 0015 = 15 Pulses per 360 ° Rotation CW OFF A Signal ON B Signal D Suggested Filter Circuit 5 VDC 10K OHMS 10K OHMS 10K OHMS 10K OHMS TERMINAL A TERMINAL B 0.01 μF 0.01 μF ENCODER TERMINAL C WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov Switch Circuit *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Devices are tested using standard noise reduction filters. D E For optimum performance, designers should use noise reduction filters in their circuits. Specifications are subject to change without notice. CIRCUIT DIAGRAM Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications Level control, tuning and timer settings in: ■ Audio-visual equipment ■ Consumer electric appliances ■ Environmental controls ■ Musical instrumentation ■ Communications equipment PEC09 Series - 9 mm Incremental Encoder Product Dimensions PEC09-2xxxF-Nxxxx 7.05 (.278) 9.7 (.382) 4.85 (.191) 2.5 ± 0.1 (.098 ± .004) SHAFT FLAT IS OPTIONAL ANGLE Y X 5.0 ± 0.1 (.197 ± .004) 5.0 ± 0.1 (.197 ± .004) B C X 6.5 (.256) A (SW01) 3.5 (.138) 2.5 ± 0.1 (.098 ± .004) 0.8 ± 0.2 (.031 ± .008) A C Y 0.2 (.008) 0.74 (.029) B 0.9 ± 0.1 (.035 ± .004) Locating Lug Detail 13.3 (.524) SWITCH STROKE 0.5 +0.4/-0.3 (.020 +.016/-.012) 6.5 (.256) 0.2 (.008) 6.25 (.246) 0.74 (.029) 6.25 ± 0.1 (.246 ± .004) 5.0 ± 0.1 (.197 ± .004) 2.5 ± 0.1 (.098 ± .004) 5.0 ± 0.1 (.197 ± .004) 2.5 ± 0.1 (.098 ± .004) 0.8 ± 0.2 (.031 ± .008) (SW) (ENCODER) 3.5 (.138) E B C MOUNTING SURFACE 6.0 ± 0.2 (.236 ± .008) X X 0.8 ± 0.2 (.031 ± .008) Y 1.0 +0.2/-0 5 PLCS. (.039 +.008/-0) 2.0 ± 0.1 (.079 ± .004) Hardware 0.2 (.008) M7 x 0.75 (.030) DIA. 12.05 (.474) SWITCH STROKE 1.5 ± 0.5 (.059 +.020) 6.5 (.256) 3.5 (.138) Y A D PEC09-2xxxF-Txxxx 4.85 (.191) 1.0 +0.2/-0 3 PLCS. (.039 +.008/-0) 3.5 (.138) PEC09-2xxxF-Sxxxx 4.85 (.191) MOUNTING SURFACE 2.5 ± 0.1 (.098 ± .004) 5.0 ± 0.1 (.197 ± .004) 2.5 ± 0.1 (.098 ± .004) (SW) (ENCODER) 0.8 ± 0.2 (.031 ± .008) DIMENSIONS: E D 5.0 ± 0.1 (.197 ± .004) 5.0 ± 0.1 (.197 ± .004) B C MOUNTING SURFACE A 12.7 (.500) 2.0 (.079) 11.0 (.433) DIA. NUT DIA. 12.0 (.472) 7.2 DIA. (.283) 1.0 +0.2/-0 5 PLCS. (.039 +.008/-0) 0.5 (.020) MM (INCHES) WASHER Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of thisdocument, and at www.bourns.com/docs/legal/disclaimer.pdf. PEC09 Series - 9 mm Incremental Encoder Shaft Options PEC09-2xxxx-Nxxxx Knurled Type L1 LB PEC09-2xxxx-Sxxxx (0.5 mm Switch Stroke) PEC09-2xxxx-Txxxx (1.5 mm Switch Stroke) Knurled Type Knurled Type L1 1.0 (.039) L2 LB 18 TEETH 0.75 M7x (.030) L1 15 (.591) 20 (.787) 25 (.984) LB 5.0 (.197) 7.0 (.276) 10.0 (.394) L2 6.0 (.236) 10.0 (.394) 10.0 (.394) L3 7.0 (.276) 11.0 (.433) 11.0 (.433) L1 15 (.591) 20 (.787) 25 (.984) LB 5.0 (.197) 7.0 (.276) 10.0 (.394) Flat Type L1 L1 0.75 M7x (.030) L1 15 (.591) 20 (.787) 25 (.984) 4.5 (.177) L2 0.5 1.0 C OR (.020) (.039) LB 5.0 (.197) 7.0 (.276) 10.0 (.394) L2 7.0 (.276) 12.0 (.472) 12.0 (.472) LB 6.0 (.236) DIA. 1.0 (.039) L2 L2 6.0 (.236) 9.0 (.354) 9.0 (.354) L3 7.0 (.276) 10.0 (.394) 10.0 (.394) L1 15 (.591) 20 (.787) 25 (.984) 0.75 M7x (.030) L1 15 (.591) 20 (.787) 25 (.984) 6.0 (.236) DIA. L3 0.5 1.0 C OR (.020) (.039) LB 5.0 (.197) 7.0 (.276) 10.0 (.394) L2 5.0 (.197) 8.0 (.315) 8.0 (.315) L3 6.0 (.236) 9.0 (.354) 9.0 (.354) Flat Type 0.5 1.0 C OR (.020) (.039) LB 5.0 (.197) 7.0 (.276) 10.0 (.394) DIMENSIONS: L1 4.5 (.177) L2 0.75 M7x (.030) 18 TEETH 6.0 (.236) DIA. L3 0.5 1.0 C OR (.020) (.039) 0.75 M7x (.030) Flat Type LB LB 18 TEETH 6.0 (.236) DIA. L3 0.5 1.0 C OR (.020) (.039) L1 1.0 (.039) L2 L2 7.0 (.276) 10.0 (.394) 10.0 (.394) LB 6.0 (.236) DIA. 0.75 M7x (.030) L1 15 (.591) 20 (.787) 25 (.984) 4.5 (.177) L2 C 0.5 1.0 OR (.020) (.039) LB 5.0 (.197) 7.0 (.276) 10.0 (.394) 6.0 (.236) DIA. L2 7.0 (.276) 10.0 (.394) 10.0 (.394) MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of thisdocument, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL