Features
n Push switch option
n Compact, low profile
n High rotational life and switch life
n Metal bushing/shaft
n RoHS compliant*
PEC11L Series - 11 mm Low Profile Encoder
Electrical Characteristics
Additional Information
Output���������������������������������������������������������������������������������������������������������������� 2-bit quadrature code
Closed Circuit Resistance�����������������������������������������������������������������������������100 milliohms maximum
Contact Rating����������������������������������������������������������������������������������������������������������� 10 mA @ 5 VDC
Insulation Resistance������������������������������������������������������������������������������� 100 megohms @ 250 VDC
Dielectric Withstanding Voltage
Sea Level������������������������������������������������������������������������������������������������������������300 VAC minimum
Electrical Travel����������������������������������������������������������������������������������������������������������������� Continuous
Contact Bounce (60 RPM)������������������������������������������������������������������������������������� 10 ms maximum**
RPM (Operating)���������������������������������������������������������������������������������������������������������� 60 maximum**
Click these links for more information:
PRODUCT TECHNICAL INVENTORY SAMPLES
LIBRARY
CONTACT
Environmental Characteristics
Operating Temperature Range��������������������������������������������������� -25 °C to +80 °C (-13 °F to +176 °F)
Storage Temperature Range������������������������������������������������������ -40 °C to +85 °C (-40 °F to +185 °F)
Humidity����������������������������������������������������������������������������� MIL-STD-202, Method 103B, Condition A
Vibration���������������������������������������������������������������������������� 10~55~10 Hz / 1 min. / Amplitude 1.5 mm
Shock�����������������������������������������������������������������������������������������������������������������������������������������100 G
Rotational Life����������������������������������������������������������������������������������������������100,000 cycles minimum
IP Rating�������������������������������������������������������������������������������������������������������������������������������������� IP 40
Mechanical Characteristics
Mechanical Angle������������������������������������������������������������������������������������������������������360 ° continuous
Torque
Detent�������������������������������������������������������������������������������������������� 20-200 gf-cm (0.27 to 2.8 oz-in)
Running������������������������������������������������������������������������������������� 10 to 150 gf-cm (0.14 to 2.1 oz-in)
Mounting�������������������������������������������������������������������������������������������� 70 N-cm (6.2 lb-in) maximum
Shaft Side Load (Static)���������������������������������������������������������������������������� 2.04 kgf (4.5 lbs) minimum
Shaft Strength (Push-Pull)������������������������������������������������������������������������������������������100 N (22.5 lbs)
Weight����������������������������������������������������������������������������������������������������������5 gm (0.17 oz) maximum
Terminals����������������������������������������������������������������������������������������������Printed circuit board terminals
Soldering Condition
Wave Soldering�Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C ±5 °C max. for 3-5 seconds
Hand Soldering����������������������������������������������������������������������������������������������Not recommended
Hardware������������������������������������One flat washer and one mounting nut supplied with each encoder
Switch Characteristics
Switch Type�������������������������������������������������������������������������������� Contact Push ON Momentary SPST
Switch Life��������������������������������������������������������������������������������������������� 100,000 actuations minimum
Power Rating (Resistive Load)����������������������������������������������������������������������������������10 mA at 5 V DC
Switch Travel������������������������������������������������������������������������������������������������������������������ 0.5 ± 0.3 mm
Switch Actuation Force�������������������������������������������������������������������� 610 ± 306 gf (8.47 ± 4.24 oz.-in.)
How To Order
Model
Terminal Configuration
4 = PC Pin Horizontal/Rear Facing
Detent Option
0 = No Detents (15, 20 pulses)
1 = 20 Detents (20 pulses)
2 = 30 Detents (15 pulses)
Standard Shaft Length
15 = 15.0 mm 20 = 20.0 mm 25 = 25.0 mm
PEC11L - 4 0 20 F - S 0015
Asia-Pacific:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Europe:
Tel: +36 88 885 877
Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
**Devices are tested using standard noise reduction
filters. For optimum performance, designers should use
noise reduction filters in their circuits.
Specifications are subject to change without notice.
Users should verify actual device performance in their
specific applications. The products described herein and
this document are subject to specific legal disclaimers as
set forth on the last page of this document, and at
www.bourns.com/docs/legal/disclaimer.pdf.
Shaft Style
F = Metal Flatted Shaft K = .Metal Knurled Shaft
Switch Configuration
S = Push Momentary Switch N = No Switch
Resolution
0015 = 15 Pulses per 360 ° Rotation
0020 = 20 Pulses per 360 ° Rotation
CAUTION
Do not store product in high temperature and humidity,
direct sunlight and/or places where corrosive gases may
be generated. Please use product within 6 months from
the date of delivery and promptly after unpacking.
Applications
Level control, tuning and timer settings in:
n Audio-visual equipment
n Consumer electric appliances
n Environmental controls
n Musical instrumentation
n Communications equipment
PEC11L Series - 11 mm Low Profile Encoder
Product Dimensions
PEC11L-4xxxF-Nxxxx
M7XP
0.75
(.030)
C
3.0
(.118)
0.25
(.010)
11.8
(.465)
C
A
P
6.0 +0/-0.1
(.236 +0/-.004)
DIA.
L
13.6
(.535)
3 PLCS.
0.8
(.031)
PEC11L-4xxxF-Sxxxx
3.0
(.118)
M7XP
0.75
(.030)
4.5
(.177)
B
F
P
A
C
Dim.
Tol.
5.0
(.197)
7.0
(.276)
7.0
(.276)
6.0
(.236)
7.0
(.276)
很抱歉,暂时无法提供与“PEC11L-4120F-S0020”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格
- 1+26.75160
- 10+23.06880
- 30+20.87640
- 75+17.72928
- 525+16.76484
- 975+16.32366