PEL12D-4018F-S1024

T PL IA N M Features ■ Compact design, long life and high *R oH S CO reliability ■ Vertical and horizontal mount versions ■ Momentary switch ■ Dual LED design ■ Flatted and knurled shaft styles ■ Bushing and bushingless options PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Electrical Characteristics Output .....................................................................................................................................................................................2-bit quadrature code Closed Circuit Resistance ........................................................................................................................................................... 3 ohms maximum Contact Rating .............................................................................................................................................................................. 0.5 mA @ 5 VDC Insulation Resistance ....................................................................................................................................................100 megohms @ 250 VDC Dielectric Withstanding Voltage Sea Level ................................................................................................................................................................................ 300 VAC minimum Electrical Travel ......................................................................................................................................................................................Continuous Contact Bounce (15 RPM).........................................................................................................................................................2.0 ms. maximum** RPM (Operating) ............................................................................................................................................................................ 100 maximum** Environmental Characteristics Operating Temperature Range .......................................................................................................................-10 °C to +70 °C (+14 °F to +158 °F) Storage Temperature Range .......................................................................................................................... -40 °C to +85 °C (-40 °F to +185 °F) Operating Humidity ..................................................................................................................................................................... 25 % to 85 % R.H. Rotational Life..................................................................................................................................................................... 30,000 cycles minimum Switch Life .......................................................................................................................................................................... 20,000 cycles minimum IP Rating ...........................................................................................................................................................................................................IP 40 Mechanical Characteristics Mechanical Angle .......................................................................................................................................................................... 360 ° continuous Detent Torque ..................................................................................................................................................30 to 200 g-cm (0.42 to 2.77 oz.-in.) Running Torque ..................................................................................................................................................... 50 g-cm (0.69 oz.-in.) maximum Shaft Strength (Push) ...................................................................................................................................................................... 5 kgf (11.0 lbs.) Shaft Strength (Pull) ...................................................................................................................................................................... 10 kgf (22.0 lbs.) Weight ............................................................................................................................................................................... 3 gm (0.1 oz.) maximum Terminals .................................................................................................................................................................. Printed circuit board terminals Soldering Condition Wave Soldering ..................................................................... Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C max. for 5 ± 1 seconds Hand Soldering .................................................................................................................................................................. Not recommended Hardware ................................................................................... One flat washer and one mounting nut supplied with each encoder with bushing Switch Characteristics Switch Type .....................................................................................................................................................Contact Push ON Momentary SPST Power Rating (Resistive Load) ...................................................................................................................................................... 10 mA at 5 V DC Contact Resistance ............................................................................................................................................................................100 milliohms Switch Travel .................................................................................................................................................................................0.5 +0.0/-0.3 mm Switch Actuation Force .................................................................................................................................................450 ± 200 gf (15.9 ±7.0 oz.) How To Order PEL12D - 4 0 21 F - S 1 024 Model Terminal Configuration 2 = Vertical Mount/Side Exit PC Pin 4 = Horizontal Mount/Rear Exit PC Pin Detent Option 0 = No Detents 2 = 24 Detents Standard Shaft Length Flatted: Knurled: 16 = 16.0 mm 26 = 26.0 mm 25 = 25.0 mm 18 = 18.5 mm 31 = 31.0 mm 21 = 21.0 mm Shaft Style F = Insulated Flatted Shaft S = Insulated Knurled Shaft (18 Teeth) G = Insulated Flatted Shaft w/Bushing*** T = Insulated Knurled Shaft (18 Teeth) w/Bushing Switch Configuration S = Push Momentary Switch LED Color Dual: 1 = Blue/Orange 2 = Green/Red 3 = Blue/Green Resolution 024 = 24 Pulses per 360 ° Rotation *RoHS Directive 2015/863, Mar 31, 2015 and Annex. *** Available in 18.5, 21 and 26 mm shaft lengths **Devices are tested using standard noise reduction filters. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov For optimum performance, designers should use noise reduction filters in their circuits. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications Level control, tuning and timer settings in: ■ Audio-visual equipment ■ Consumer electric appliances ■ Musical instrumentation ■ Communications equipment PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Product Dimensions PEL12D-4xxxS-Sxxxx (Horizontal Mount w/Dual LED & Switch, Knurled Shaft) MOUNTING SURFACE 25.0 (.984) 7.0 (.276) 4 PLCS. 0.8 (.031) 0.3 (.012) 2.9 (.114) 14.0 (.551) 18.0 (.709) 5.0 (.197) 0.8 (.031) 7.0 (.276) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 2.0 ± 0.1 (.079 ± .004) 18 TEETH 0.3 (.012) 13.2 ± 0.1 (.520 ± .004) 12.4 (.488) 13.2 (.520) 10.2 (.402) 2.8 (.110) 1.0 +0.2/-0 (.039 +.008/-0) DIA. 4 PLCS. 4 7.0 ± 0.1 (.276 ± .004) 3 2 2 PLCS. 2.1 +0.1/-0 (.083 +.004/-0) 1 7.5 ± 0.1 (.295 ± .004) 6.0 (.236) DIA. 6.8 DIA. (.268) 6.0 ± 0.1 (.236 ± .004) 2.0 ± 0.1 (.079 ± .004) 8.2 (.323) A C 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. B 5.0 ± 0.1 (.197 ± .004) 5.0 (.197) A C B 1.1 +0.2/-0 (.043 +.008/-0) DIA. 3 PLCS. PEL12D-4xxxF-Sxxxx (Horizontal Mount w/Dual LED & Switch, Flatted Shaft) MOUNTING SURFACE LM 7.0 (.276) 0.3 (.012) 2.9 (.114) 0.8 (.031) L1 1.5 5.0 (.197) (.591) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 14.0 (.551) L1 LM 12.4 (.488) 3 (.118) 16 (.630) 5 (.197) 18.5 (.728) 7 (.276) 21 (.827) 12 (.472) 26 (1.024) 12 (.472) 31 (1.220) 8.2 (.323) 0.5 (.020) 2.0 ± 0.1 (.079 ± .004) 13.2 (.520) 10.2 (.402) 0.3 (.012) 2.8 (.110) 6.8 (.268) DIA. 4.5 ± 0.05 (.177 ± .002) DIA. 6.0 ± 0.1 (.236 ± .004) A C B 5.0 (.197) DIMENSIONS: Dual LED Circuit UNDER MM (INCHES) TOLERANCES: 10.0 ±0.3 ±0.5 10.0 ~ 100 = = (.394) (±.012) (.394 ~ 3.937) (±.020) 4 (+) 3 (+) 2 (-) 1 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Product Dimensions PEL12D-2xxxS-Sxxxx (Vertical Mount w/Dual LED & Switch, Knurled Shaft) MOUNTING SURFACE 25.0 (.984) 7.0 (.276) 2.5 (.098) 18.0 (.709) 5.0 (.197) 0.8 (.031) 7.0 (.276) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 18 TEETH 10.0 (.394) 4 PLCS. 0.8 (.031) 4.5 ± 0.1 (.177 ± .004) 12.4 (.488) 8.2 (.315) 6.0 ± 0.1 (.236 ± .004) 13.2 (.520) 10.2 (.402) 1.0 +0.2/-0 (.039 +.008/-0) DIA. 4 PLCS. 5.0 ± 0.1 (.197 ± .004) B 4 10.8 ± 0.1 (.425 ± .004) 3 2 6.0 (.236) DIA. 6.8 DIA. (.268) 3.1 ± 0.1 (.122 ± .004) 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. C A 1 1.1 +0.2/-0 (.043 +.008/-0) DIA. 3 PLCS. 2.0 ± 0.1 (.079 ± .004) 3.5 (.138) A C B 2.0 +0.1/-0 (.079 +.004/-0) 2 PLCS. 10.0 (.394) 2.0 (.079) 6.1 (.240) 2.1 +0.1/-0 (.083 +.004/-0) 2 PLCS. PEL12D-2xxxF-Sxxxx (Vertical Mount w/Dual LED & Switch, Flatted Shaft) MOUNTING SURFACE LM 7.0 (.276) 2.5 (.098) 12.4 (.488) L1 1.5 5.0 (.197) (.591) 0.8 (.031) SWITCH STROKE 0.5 +0/-0.3 (.020 +0/-.012) 8.2 (.315) 0.5 (.020) 13.2 (.520) 10.2 (.402) 10.0 (.394) 6.8 (.268) DIA. 4.5 ± 0.05 (.177 ± .002) DIA. 6.0 ± 0.1 (.236 ± .004) 3.5 (.138) 2.0 (.079) A C L1 LM 3 (.118) 16 (.630) 5 (.197) 18.5 (.728) 7 (.276) 21 (.827) 12 (.472) 26 (1.024) 12 (.472) 31 (1.220) B 10.0 (.394) 6.1 (.240) DIMENSIONS: UNDER MM (INCHES) TOLERANCES: 10.0 ±0.3 ±0.5 10.0 ~ 100 = = (.394) (±.012) (.394 ~ 3.937) (±.020) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PEL12D - 12 mm Encoder with Switch and Illuminated Shaft Product Dimensions Quadrature Output Table CW PEL12D-4xxxT-Sxxxx (Horizontal Mount w/Dual LED & Switch, Knurled Shaft w/Bushing) 25.0 (.984) 7.5 (.295) OFF 17.5 (.689) 7.0 (.276) A Signal 7.0 (.276) 0.3 (.012) ON B Signal D CCW 18 TEETH M9 X Suggested Filter Circuit 6.0 DIA. (.236) 0.75 (.030) 5 VDC PEL12D-4xxxG-Sxxxx (Horizontal Mount w/Dual LED & Switch, Flatted Shaft w/Bushing) 10K OHMS 1 0K OH MS LM L2 L1 LM TERMINAL A 5 (.197) 11 (.433) 18.5 (.728) 0.01 μF 7 (.276) 13.5 (.532) 21 (.827) 12 (.472) 18.5 (.728) 26 (1.024) L1 5.0 (.199) L2 0.75 M9 X (.030) DIMENSIONS: UNDER 10K OHMS MM (INCHES) TOLERANCES: 10.0 ±0.3 ±0.5 10.0 ~ 100 = = (.394) (±.012) (.394 ~ 3.937) (±.020) 10K OHMS TERMINAL B 0.01 μF ENCODER TERMINAL C LED Terminal Decoder Code Color Terminals 1 Blue / Orange 2 Green / Red 3 Blue / Green ➀➁ / ➀➂ ➀➁ / ➀➂ ➀➁ / ➀➂ LED Characteristics (Dual) LED Color Power Dissipation (mW) DC Forward Current (mA) Forward Voltage (V) Typ. Max. Blue/ Orange Blue 105 30 3.3 4.0 Orange 75 30 2.1 2.5 Green/ Red Green 120 30 3.2 4.0 Red 75 30 1.95 2.5 Blue/ Green Blue 120 30 3.3 4.0 Green 120 30 3.2 4.0 Red/ Green Red 75 30 1.95 2.5 Green 120 30 3.2 4.0 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com Notes: Reverse Current: 10 μA Reverse Voltage: 5 VDC Test Condition (IF): 20 mA Specifications are subject to change without notice. REV. 09/19 Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL