PER281-P115-N0015

Features n Low profile incremental encoder n High-class rotational feel n Haptic detent feedback n RoHS compliant* PER28 - 28 mm Low Profile Incremental Ring Encoder Additional Information Product Dimensions Click these links for more information: 3 +0.1/-0 (.118 +.004/-0) 3 PLCS. 120 ° 3 PLCS. PRODUCT TECHNICAL INVENTORY LIBRARY SAMPLES B C A 29.5 (1.161) Electrical Characteristics Output������������������������2-bit quadrature code Contact Rating����������������� 10 mA @ 5 V DC Insulation Resistance ���������������������100 megohms @ 250 V DC Dielectric Withstanding Voltage Sea Level����������������������������������300 V AC Electrical Travel�������������������������Continuous Contact Bounce (15 RPM)������ 2 ms max.** R: Mechanical Characteristics RPM (Operating)���������������������������� 60 max. Mechanical Angle������������� 360 ° continuous Detent Torque���������������������50 to 250 gf-cm Rotational Life�����������������������50,000 cycles Soldering Condition Wave Soldering������ 230 °C for 3 seconds Manual Soldering��� 300 °C for 3 seconds Recommended PCB Layout 23 ± 0.05 (.906 ± .002) 4 (.157) 1.5 (.059) 2 PLCS. 2.5 ± 0.1 (.098 ± .004) 2 PLCS. 1.5 +0/-0.1 (.059 +0/-.004) 2 PLCS. DIMENSIONS: 3.5 (.138) 90 ° B: 18 ± 0.15 (.701 ± .006) 2 (.079) 2 PLCS. 1.2 (.047) 2 PLCS. How To Order PER28 1 - P1 15 - N 0015 D Model ON Number of Units 1 = Single OFF Orientation P = PC Pins Down Facing Detent Option 1 = 30 Detents (15 Pulses) Ring Height 15 = 15 mm 5 VDC 10K OHMS 10K OHMS 10K OHMS 10K OHMS TERMINAL A WARNING Cancer and Reproductive Harm 2.5 +0.2/-0 (.098 +.008/-0) A: 17 ± 0.15 (.669 ± .006) MM (INCHES) CW MM (INCHES) 23 (.901) 2.5 (.098) DIA. 2 PLCS. A C B DIMENSIONS: A DIA. B DIA. 9 (.354) Suggested Filter Circuit 1 +0.1/-0 (.039 +.004/-0) DIA. 3 PLCS. 7.5 ± 0.1 (.295 ± .004) 2 PLCS. 5 +0.1/-0 (.197 +.004/-0) ON 1.6 (.063) 2 PLCS. 16 (.630) 10 ° 3 PLCS. 7.5 ± 0.1 (.295 ± .004) 3 PLCS. 3 +0.2/-0 (.118 +.008/-0) 1 (.039) 15 (.591) 28 (1.102) 23 ± 0.1 (.901 ± .004) 21.6 ± 0.15 (.850 ± .006) DIA. 4 (.157) 3 PLCS. OFF 1.5 +0.1/-0 (.059 +.004/-0) DIA. 2 PLCS. 10.2 (.402) 3 PLCS. Quadrature Output Table 28.9 ± 0.05 (1.138 ± .002) 2.6 (.102) 2 PLCS. 10.8 (.425) 15 (.591) 0.6 (.024) 3 PLCS. Environmental Characteristics Operating Temperature����� -30 °C to +80 °C Storage Temperature�������� -40 °C to +85 °C IP Rating��������������������������������������������� IP 40 0.8 (.031) 3 PLCS. 5 (.197) CONTACT TERMINAL B 0.01 μF Switch Configuration N = No Switch Resolution 0015 = 15 Pulses per 360 ° Rotation 0.01 μF ENCODER www.P65Warnings.ca.gov TERMINAL C * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Devices are tested using standard noise reduction filters. For optimum performance, designers should use noise reduction filters in their circuits. CAUTION Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1 2 Do not store product in high temperature and humidity, direct sunlight and/or places where corrosive gases may be generated. Please use product within 6 months from the date of delivery and promptly after unpacking. REV. 07/21 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL