PES12-42S-N0024

T PL IA N M Features ■ Compact design, long life and high *R oH S CO reliability ■ Low cost compared to optical type encoders ■ Incremental type ■ Detent option PES12 - 12 mm Shaftless Encoder Electrical Characteristics Output ....................................................................................................................................................................................... Quadrature Contact Rating .................................................................................................................................................................... 1 mA @ 5 VDC Insulation Resistance .......................................................................................................................................... 10 megohms @ 50 VDC Dielectric Withstanding Voltage Sea Level .....................................................................................................................................................................50 VAC minimum Contact Bounce (60 RPM)........................................................................................................................................... 2.0 ms. maximum** Environmental Characteristics Operating Temperature Range .......................................................................................................... -10 °C to +65 °C (-14 °F to +149 °F) Rotational Life........................................................................................................................................................ 30,000 cycles minimum IP Rating ............................................................................................................................................................................................. IP 40 Mechanical Characteristics Mechanical Angle .............................................................................................................................................................360 ° continuous Running Torque ................................................................................................................................. 30 to 200 g-cm (0.41 to 2.78 oz.-in.) Shaft Side Load (Static)................................................................................................................................... 2.04 kgf (4.5 lbs.) minimum Weight ............................................................................................................................................................................. 1.5 gm (0.05 oz.) Terminals ..................................................................................................................................................... Printed circuit board terminals Soldering Condition Wave Soldering .................................................Sn95.5/Ag2.8/Cu0.7 solder with no-clean flux: 260 °C ±5 °C max. for 1-3 seconds Hand Soldering ............................................................................................................................... 300 °C max. for 3 seconds max. Hardware ..................................................................................................................................................................No hardware supplied How To Order Quadrature Output Table PES12 - 4 0 S - N 0024 Model Terminal Configuration 4 = PC Horizontal/Rear Facing Detent Option 0 = No Detents 2 = 24 Detents Shaft Style S = Shaftless Switch Configuration N = No Switch Resolution 0024 = 24 Pulses per 360 ° Rotation WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov CW OFF A Signal ON B Signal D CCW *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Devices are tested using standard noise reduction filters. For optimum performance, designers should use noise reduction filters in their circuits. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications ■ Audio-visual equipment ■ Consumer electric appliances ■ Radios ■ Musical instrumentation ■ Communications equipment ■ Home appliances PES12 - 12 mm Shaftless Encoder Product Dimensions 14.0 (.551) 8.5 (.335) 3.5 (.138) 12.4 (.488) 2.65 (.104) 5.0 (.197) 0.8 (.031) DIA. 6.0 ± 0.1 (.236 ± .004) 1.2 (.047) 8.2 (.323) DIA. 3.1 ± 0.1 (.122 ± .004) 2.1 ± 0.05 (.083 ± .002) 3.5 (.138) 6.6 +0.2/-0.1 (.260 +.008/-.004) 0.6 (.024) 2.0 +0.1/-0 (.079 +.004/-0) 13.2 (.520) 5.2 (.205) 10.2 (.402) 2.0 ± 0.1 (.079 ± .004) 2.0 +0.1/-0 (.079 +.004/-0) 13.2 (.520) 2.1 +0.1/-0 (.083 +.004/-0) 7.5 (.295) DIA. HOLE A C MOUNTING SURFACE B A C 5.0 (.197) TOLERANCES: 10.0 = (>.394) (±.020) DIMENSIONS: B 1.1 +0.2/-0 (.043 +.008/-0) DIA. 5.0 3 PLCS. (.197) MM (INCHES) 0.9 ± 0.1 (.035 ± .004) Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL