PM127SH-2R4N-RC

Applications PL IA N T Features M ■ Formerly model ■ Input/output of DC/DC converters *R oH S CO ■ Available in E12 values ■ Power supplies for: 47 0 ■ Inductance as low as 1.2 µH • Portable communication equipment • Camcorders • LCD TVs ■ Current rating to 6.6 amps ■ RoHS compliant* PM127SH Series - Shielded SMD Power Inductors Inductance 100 kHz Bourns Part No. PM127SH-1R2N-RC PM127SH-2R4N-RC PM127SH-3R5N-RC PM127SH-4R7N-RC PM127SH-6R1N-RC PM127SH-7R6N-RC PM127SH-100M-RC PM127SH-120M-RC PM127SH-150M-RC PM127SH-180M-RC PM127SH-220M-RC PM127SH-270M-RC PM127SH-330M-RC PM127SH-390M-RC PM127SH-470M-RC PM127SH-560M-RC PM127SH-680M-RC PM127SH-820M-RC PM127SH-101M-RC PM127SH-121M-RC PM127SH-151M-RC PM127SH-181M-RC PM127SH-221M-RC PM127SH-271M-RC PM127SH-331M-RC PM127SH-391M-RC PM127SH-471M-RC PM127SH-561M-RC PM127SH-681M-RC PM127SH-821M-RC PM127SH-102M-RC (μH) 1.2 2.4 3.5 4.7 6.1 7.6 10.0 12.0 15.0 18.0 22.0 27.0 33.0 39.0 47.0 56.0 68.0 82.0 100.0 120.0 150.0 180.0 220.0 270.0 330.0 390.0 470.0 560.0 680.0 820.0 1000.0 Tol. % -20 to +40 -20 to +40 -20 to +40 -20 to +40 -20 to +40 -20 to +40 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 Electrical Schematic Test Q Frequency Typ. (MHz) 28 7.96 20 7.96 20 7.96 22 7.96 20 7.96 15 7.96 24 2.52 26 2.52 26 2.52 24 2.52 20 2.52 26 2.52 28 2.52 24 2.52 24 2.52 24 2.52 20 2.52 20 0.796 18 0.796 16 0.796 24 0.796 24 0.796 24 0.796 20 0.796 18 0.796 20 0.796 20 0.796 20 0.796 26 0.796 20 0.796 40 0.252 SRF RDC Typ. Max. (MHz) (mΩ) 83 18.0 45 10.0 36 12.0 30 15.5 23 18.0 21 20.0 17 19.5 15 28.0 13 28.5 12 35.0 11 38.6 10 52.0 9.5 57.0 8.5 70.0 7.5 80.0 7.0 100.0 6.5 120.0 5.0 130.0 4.5 150.0 4.3 200.0 4.1 270.0 4.0 300.0 3.4 400.0 3.1 450.0 2.9 600.0 2.7 680.0 2.2 880.0 2.0 960.0 1.7 1300.0 1.4 1500.0 1.3 1700.0 I rms Max. (A) 9.80 9.20 8.80 8.20 6.60 5.90 6.00 5.60 5.20 4.80 4.30 3.90 3.50 3.20 2.90 2.60 2.40 2.30 2.10 1.95 1.85 1.75 1.60 1.20 1.10 1.60 0.90 0.80 0.75 0.70 0.68 Test Voltage ....................................0.1 V .. 230 °C, 50 sec. max. Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature ................................-40 °C to +125 °C Resistance to Soldering Heat ............................... 260 °C for 10 sec. Moisture Sensitivity Level .......................2 ...................N/A Materials Core ...........................Ferrite DR and RI Wire ............ Enameled copper wire 130 Terminal ....................................Cu/Ni/Sn Rated Current ...................Ind. drop 25 % typ. at Isat Temperature Rise ................. 40 °C max. at rated Irms Packaging .................... 400 pcs. per reel Product Dimensions 12.5 ± 0.3 (.492 ± .012) 100 12.5 ± 0.3 (.492 ± .012) 7.5 ± 0.5 (.295 ± .020) 5.0 ± 0.3 (.197 ± .012) Recommended Layout REF. I sat Typ. (A) 9.80 10.50 9.80 8.80 7.80 6.50 6.30 6.60 5.00 4.60 4.10 3.70 3.30 3.10 2.80 2.50 2.30 2.20 2.00 1.95 1.90 1.88 1.70 1.60 1.40 1.40 1.25 1.15 0.97 0.94 0.80 5.4 (.213) 7.0 TYP. (.276) 2.9 (.114) REF. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov 6.8 (.268) REF. 2.9 (.114) REF. DIMENSIONS: MM (INCHES) *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PM127SH Series - Shielded SMD Power Inductors 330 DIA. (12.99) 2.0 ± 0.5 (.079 ± .020) 30.4 (1.197) THICKNESS 0.10 (.004) MAX. 13.0 (.512) DIA. 21.0 ± 0.8 (.827 ± .031) EMBOSSED CAVITY 50.0 (1.969) 13.0 DIA. (.512) EMBOSSED CARRIER 26 (1.024) 4.0 (.157) END 24 (.945) 100 100 START 100 20.0 (.787) NO COMPONENT COMPONENTS NO COMPONENT 400 (15.75) 200 (7.87) USER DIRECTION OF FEED QTY: 400 PCS. PER REEL DIMENSIONS: MM (INCHES) Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL