PM3308-680M-RC

Features ■ Formerly This series is currently available but not recommended for new designs. model ■ Height of 3.0 mm max. ■ Current rating up to 2.0 A ■ RoHS compliant* PM3308 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. (μH) Tol. (%) Test Frequency (MHz) DCR Max. (Ω) Irms (A) Isat (A) PM3308-100M-RC 10 ±20 2.52 0.11 2.00 2.40 PM3308-150M-RC 15 ±20 2.52 0.15 1.50 2.00 PM3308-220M-RC 22 ±20 2.52 0.23 1.30 1.60 PM3308-330M-RC 33 ±20 2.52 0.30 1.10 1.40 PM3308-470M-RC 47 ±20 2.52 0.39 0.80 1.00 PM3308-680M-RC 68 ±20 2.52 0.7 0.70 0.90 PM3308-101M-RC 100 ±20 0.796 0.8 0.60 0.70 PM3308-151M-RC 150 ±20 0.796 1.2 0.50 0.60 PM3308-221M-RC 220 ±20 0.796 1.9 0.40 0.50 PM3308-331M-RC 330 ±20 0.796 2.7 0.30 0.40 PM3308-471M-RC 470 ±20 0.796 4.0 0.20 0.30 PM3308-681M-RC 680 ±20 0.796 5.3 0.10 0.20 PM3308-102M-RC 1000 ±20 0.252 8.4 0.05 0.10 Electrical Schematic Typical Part Marking General Specifications Test Voltage .................................... 0.1 V Operating Temperature ................................ -40 °C to +125 °C (Temperature rise included) Storage Temperature ...-40 °C to +125 °C Moisture Sensitivity Level .......................2 ESD Classification (HBM)................... N/A Materials Core .............................................. Ferrite Wire ............................ Enameled copper Terminal .................................... Sn/Ni/Cu Rated Current ................... Ind. drop 10 % typ. at Isat Temperature Rise ............................ 30 °C typical at Irms Packaging ...................1000 pcs. per reel Product Dimensions 12.7 ± 0.2 (.500 ± .008) 10.0 ± 0.2 (.394 ± .008) 101 3.0 ± 0.3 (.118 ± .012) 7.6 ± 0.3 (.299 ± .012) 2.2 ± 0.2 (.087 ± .008) 2.4 ± 0.2 (.094 ± .008) 7.3 (.287) 3.0 (.118) 2.8 (.110) DIMENSIONS: WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MM (INCHES) PM3308 Series - SMD Power Inductors Inductance vs. Current 220 221 200 180 Inductance (μH) 160 151 140 120 100 101 80 680 60 470 40 330 220 20 0 150 100 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 DC Current (A) 9500 102 9000 8500 8000 7500 7000 Inductance (μH) 6500 6000 5500 5000 4500 4000 3500 3000 2500 2000 1500 1000 681 331 500 0 0 471 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 DC Current (A) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PM3308 Series - SMD Power Inductors Packaging Specifications 29.5 ± 0.4 (1.16 ± .016) 330 ± 1.5 (12.99 ± .059) DIA. 21.5 +0.5/-0 (.846 +.020/-0) DIA. 13.0 +0.5/-0.2 (.512 +.020/-0) DIA. 100.0 ± 1.5 (3.94 ± .059) DIA. 2.00 ± 0.5 (.079 ± .020) 24.5 +0.5/-0 (.965 +.020/-0) 2.00 ± 0.1 (.079 ± .004) 1.75 ± 0.1 (.069 ± .004) DIA. 1.5 + 0.1/-0 (.059 +.004/-0) 101 24.00 ± 0.3 (.945 ± .012) 4.00 ± 0.1 (.157 ± .004) 11.5 ± 0.1 (.453 ± .004) 13.00 ± 0.1 (.512 ± .004) 12.00 ± 0.1 (.472 ± .004) 9.50 ± 0.1 (.374 ± .004) 0.35 ± 0.05 (.016 ± .002) 1.5 ± 0.1 DIA. (.059 +.004/-0) 3.70 ± 0.1 (.146 ± .004) QUANTITY: 1000 PCS. PER REEL DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bour ns.com EMEA: Tel: +36 88 885 877 • Email: eur ocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bour ns.com www.bourns.com REV. 06/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL