PM5022-471M-RC

PL IA N T Features Applications M ■ Formerly model ■ Input/output of DC/DC converters *R oH S CO ■ Available in E6 series ■ Power supplies for: ■ Low profile of only 6.6 mm • Portable communication equipment • Camcorders • LCD TVs ■ Inductance as low as 1 µH ■ RoHS compliant* PM5022 Series - SMD Power Inductor Inductance 100 kHz Bourns Part No. (μH) PM5022-1R0M-RC 1.0 PM5022-2R2M-RC 2.2 PM5022-3R3M-RC 3.3 PM5022-5R6M-RC 5.6 PM5022-8R2M-RC 8.2 PM5022-100M-RC 10 PM5022-150M-RC 15 PM5022-220M-RC 22 PM5022-330M-RC 33 PM5022-470M-RC 47 PM5022-680M-RC 68 PM5022-101-RC 100 150 PM5022-151-RC PM5022-221-RC 220 330 PM5022-331-RC PM5022-471-RC 470 PM5022-681-RC 680 PM5022-102-RC 1000 Tol. % ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Test SRF Q Frequency Ref. (MHz) 21 7.96 22 7.96 22 7.96 23 7.96 22 7.96 22 2.52 20 2.52 22 2.52 24 2.52 22 2.52 22 2.52 25 0.796 23 0.796 20 0.796 18 0.796 15 0.796 12 0.796 10 0.252 Typ. (MHz) 100.0 55.0 40.0 30.0 27.0 25.0 17.0 13.0 11.0 9.0 8.0 7.0 5.0 4.5 3.5 3.0 2.5 2.0 I rms Max. (A) 10.0 9.00 7.60 6.40 7.00 5.30 4.30 3.60 3.00 2.50 2.10 1.70 1.40 1.10 1.00 0.80 0.70 0.50 RDC (mΩ) 4.0 6.8 9.8 15.0 20.0 25.0 35.0 45.0 68.0 95.0 130.0 190.0 270.0 420.0 580.0 820.0 1200.0 1800.0 I sat Typ. (A) 30.00 22.00 17.00 12.80 9.40 10.00 8.00 6.70 5.40 4.60 3.80 3.20 2.60 2.20 1.80 1.50 1.20 1.00 Test Voltage ....................................0.1 V .... 250 °C; 10 sec max. (In compliance with JEDEC, J-STD-020C, Table 4-2) Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature ................................-40 °C to +125 °C Resistance to Soldering Heat .......................... 250 °C, 10 sec. max. Moisture Sensitivity Level ..................... 2 ................. N/A Materials Core ....................................... Ferrite DR Wire ............................Enameled copper Base .....................................LCP E4008 Terminal ........................................Cu/Sn Rated Current ...................Ind. drop 10 % typ. at Isat Temp. Rise.......40 °C max. at rated Irms Packaging .................... 250 pcs. per reel Enter tolerance code: K = ±10 %, M = ±20 %. Recommended Layout REF. 2.9 REF. (.114) 12.7 (.500) 3.0 REF. (.118) DIMENSIONS: Product Dimensions 101 Electrical Schematic 14.0 ± 0.3 (.551 ± .012) 18.3 ± 0.3 (.720 ± .012) 6.6 ± 0.3 (.260 ± .012) MM (INCHES) 13.0 ± 0.3 (.512 ± .012) 2.5 ± 0.2 (.098 ± .008) 2.6 ± 0.2 (.102 ± .008) • = START OF WINDING WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PM5022 Series - SMD Power Inductor 300 Max. of 10 seconds at 250 °C Max. of 30 seconds > 220 °C 250 °C 250 Temperature (°C) 200 150 120 - 150 seconds 100 Ramp-down 5 °C/second maximum 50 Ramp-up 4 °/second maximum 0 0 50 100 150 200 250 300 Time (seconds) 2.0 ± 0.5 (.079 ± .020) 330 (12.99) DIA. 38.4 (1.512) THICKNESS 0.10 (.004) MAX. 13.0 ± 0.5 (.512 ± .020) DIA. 21.0 ± 0.8 (.827 ± .031) EMBOSSED CAVITY 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 32.0 (1.260) 34 (1.339) 4.0 (.157) END DIMENSIONS: 101 101 101 101 32.0 (1.260) START MM (INCHES) 20.0 (.787) NO COMPONENT 160 (6.299) NO COMPONENT COMPONENTS 390 (15.354) USER DIRECTION OF FEED QTY: 250 PCS. PER REEL REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL