PTJ902-030F-204A1

T PL IA N M CO *R oH S Features ■ Carbon element ■ Assortment of resistance tapers ■ Dual gang element ■ Center detent option PTJ90 Series Dual Concentric Shaft Panel Control w/Push-Push Switch Electrical Characteristics Standard Resistance Range ............................1K ohms to 1 megohm Standard Resistance Tolerance R < 250K ohms .............................±20 % R ≥ 250K ohms .............................±30 % End Resistance R < 50K ohms .................. 30 ohms max. R ≥ 50K ohms ............. 0.1 % of TR max. Insulation Resistance @ 250 VDC ................................. 100 megohms min. Dielectric Withstanding Voltage ....300 VAC Standard Taper ...................... Linear, Audio Power Rating Linear ....................................... 0.05 watt Audio ...................................... 0.025 watt Slider Noise ...........................100 mV max. Operating Voltage ........... 50 VAC / 10 VDC Product Dimensions PTJ902-xxxF 25.8 (1.016) 30.0 ± 1.0 (1.181 ± 0.039) SWITCH TRAVEL 1.5 ± 0.5 (0.059 ± 0.020) 8.2 (0.323) 20.0 (0.787) 10.0 8.5 (0.394) (0.335) 7.0 (0.276) 60 ° 3.5 +0/-0.05 (0.138 +0/-0.002) DIA. 9.5 (0.374) 4.85 (0.191) Y X 0.75 (0.030) C0.5 5.0 + 0/-0.1 2.5 +0/-0.1 (0.197 +0/-0.004) 0.8 ± 0.2 (0.098 +0/-0.004) 6.0 + 0/-0.05 (0.031 ± 0.002) (0.236 +0/-0.002) DIA. M9 x R2 R1 6.5 ± 0.5 (0.256 ± 0.002) Y 0.9 ± 0.1 (0.035 ± 0.004) 25.8 (1.016) Operational Life .................... 15,000 cycles TR Shift .........................................±15 % Operating Temperature Range ......................................-10 °C to +55 °C Resistance to Solder Heat ..................±5 % IP Rating .............................................IP 40 3.5 (0.138) INNER AND OUTER SHAFT SHOWN IN CCW POSITION PTJ902-xxxS Environmental Characteristics X 30.0 ± 1.0 (1.181 ± 0.039) 20.0 (0.787) SWITCH TRAVEL 1.5 ± 0.5 (0.059 ± 0.020) 8.0 (0.315) 5.0 (0.197) 60 ° 6.7 + 0/-0.05 (0.264 +0/-0.002) DIA. 10.0 (0.394) Y 9.5 (0.374) 4.85 (0.191) X X Mechanical Characteristics Mechanical Angle ....................... 300 ° ±3 ° Operating Torque ..................20~250 gf-cm Stop Strength....................... 5 kgf-cm max. Mounting Torque ................ 10 kgf-cm max. Shaft Push/Pull Strength ......... 10 kgf max. Soldering Condition Manual ............... 300 °C ±5 °C for 3 sec. Wave .................. 260 °C ±5 °C for 5 sec. Wash ......................... Not recommended Hardware ....................One flat washer and one mounting nut supplied with each potentiometer Switch Characteristics Power Rating .......................3 A @ 16 VDC Contact Resistance .............. 100 milliohms Dielectric Strength Bushing to Terminals.................300 VAC Switch Terminals .........................50 VAC Insulation Resistance Bushing to Terminals @ 250 VAC ......................................... 100 megohms Switch Terminals @ 50 VAC ........................................... 10 megohms Switch Type .................. Push on - Push off Contact Arrangement........................ SPDT Switch Stroke......................... 1.5 ± 0.1 mm Operating Force......................... 2 kgf max. Operating Life ....................... 10,000 cycles R2 C0.5 M9 x 0.75 (0.030) R1 1.5 ± 0.1 (0.059 ± 0.004) www.P65Warnings.ca.gov 6.5 ± 0.5 (0.256 ± 0.002) 3.0 +0.1/-0 (.118 +0.004/-0) 0.9 ± 0.1 3.5 (0.035 ± 0.004) (0.138) DIMENSIONS: Mounting Hole Detail A C D F INNER AND OUTER SHAFT SHOWN IN CCW POSITION Y 5.0 (0.197) 6.8 (0.268) 4.0 (0.157) MM (INCHES) Locating Lug Detail X 5.0 (0.197) X MOUNTING SURFACE DIA. 1.0 +0.1/-0 (0.039 +0.004/-0) 10 PLCS. 5.0 (0.197) Y 6.0 ± 0.2 (0.236 ± 0.008) 0.8 ± 0.2 (0.315 ± 0.008) 2.0 ± 0.1 (0.079 ± 0.004) Hardware DIA. 12.0 (.472) 7.2 DIA. (.283) M7 x 0.75 (.030) DIA. 12.7 (.500) 11.0 (.433) DIA. NUT WARNING Cancer and Reproductive Harm 4.7 + 0/-0.05 (0.185 +0/-0.002) DIA. 0.5 (.020) 2.0 (.079) WASHER *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications ■ Multimedia sound systems ■ Mixers / drums / DJ equipment ■ Portable electronics ■ Portable appliances PTJ90 Series Dual Concentric Shaft Panel Control w/Push-Push Switch Schematic Model Number Designator PTJ90 = Dual Concentric Shaft Panel Control w/Push-Push Switch Number of Sections 2 = Dual Gang Center Detent 0 = No Detent 1 = Center Detent Shaft Length (FMS) 30 = 30 mm Shaft Style F = Flatted Metal S = Slotted Metal Resistance Code (See Standard Resistance Table) Resistance Taper (See Taper Charts) Taper Series followed by Curve Number Standard Resistance Table Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 Resistance Code 102 202 502 103 203 503 104 204 504 105 40 6 );A 0A (3 30 A5 A); (25 4 A);A 3 (20 A);A (15 0A);A2 20 10 (1 0 10 20 30 1 A);A (05 40 50 60 70 80 Rotational Travel (%) Terminal 1 90 100 Terminal 3 B Series Tapers 100 ;B5 ) (5B 90 80 B) ;B 2 PTJ90 2 - 0 30 F - 103 B2 60 50 (2 How To Order 70 ;B 1 2' 90 80 B) 3' (1 3 R2 1' (4B );B 4 R1 1 3 F A Series Tapers 100 );B D OUTER CONNECTION 2 (3B C Tapers Output Voltage across Terminals 1-2 X 100 (%) Input Voltage across Terminals 1-3 A Dual Gang Output Voltage across Terminals 1-2 X 100 (%) Input Voltage across Terminals 1-3 Switch Circuit 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 Rotational Travel (%) Terminal 1 90 100 Terminal 3 C Series Tapers 100 Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Output Voltage across Terminals 1-2 X 100 (%) Input Voltage across Terminals 1-3 90 80 70 60 50 40 (3 0C (25 C) ;C5 30 );C 6 (20 20 (1 10 0C );C 2 0 10 20 30 40 4 );C (05 C);C 1 Terminal 1 C);C (15 C 50 3 60 Rotational Travel (%) 70 80 90 100 Terminal 3 REV. 10/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL