PTV09A-4015F-A203

Features n Carbon element n Insulated shaft n Wide variety of mounting styles n Center detent option n RoHS compliant* Electrical Characteristics F-Type Taper....................................... Linear, audio Standard Resistance Range .......................... 1 K ohms to 1 M ohms Standard Resistance Tolerance........±20 % 0.5 L ± Residual Resistance (.020) ........................500 ohms or ±1 % max. PTV09 Series - 9 mm Potentiometer Product Dimensions PTV09A-1 (Horizontal/Rear Mount w/Sleeve Bushing) L ± 6.8 (.268) F Environmental Characteristics Operating Temperature.....-10 °C to +50 °C Power Rating 4.5 (Linear and Audio)...................0.05 watt (.177) Maximum Operating Voltage 6.0 +0.0/-0.1 (Linear and Audio)....... 20 VDC, 50 VAC (.236 +.000/-.004) Sliding Noise......................... 100 mV max. (.059) 6.8 (.268) DIA. 5.5 (.217) 7.0 (.276) FULL CCW POSITION 9.7 (.382) 2.0 (.078) 3.3 (.129) 6.8 (.267) 2.4 (.094) FULL CCW POSITION 9.7 (.382) 40 ° ±10 ° 5.5 (.216) 3 PLCS. 1.5 (.059) 5.0 (.196) Model 18 TEETH KNURL Terminal Configuration 6.0 +0.0/-0.1 (Pin Layout) (.236 +.000/-.004) Other styles available. ** Bushingless version only. F 3.8 (.150) 40 ° ±10 ° PTV09A - 2 0 20 F - B 203 Resistance Code (See Table) 0.5 (.020) 1.2 (.047) 0.8 (.031) F (.039) 1 = Horizontal/Rear Mount w/Sleeve Bushing 2 = Vertical/Side Mount, Bushingless, 10 mm Height 3 = Vertical/Side Mount, Bushingless, 6.5 mm Height 4 = Horizontal/Rear Mount, U-Type Bushingless 50.5 = Horizontal/Rear Mount L ± (.020)w/Plastic Plain 1.5 Bushing 6 = Horizontal/Rear A (.059) Mount w/Metal Threaded Bushing 7 = Vertical/Side Mount w/Sleeve Bushing, 6.5 mm Height 40 TEETH KNURL 8 = Vertical/Side Mount 0.7 3.1 w/Sleeve Bushing, (.028) (.122) 10 mm height 6.0 +0.0/-0.1 Option 0(.236 +.000/-.004) = No Detent 2 = Center Standard Shaft Length 15 = 15 mm** 25 = 25 mm 20 = 20 mm 30 = 30 mm Shaft Style F = Flat Type Insulated Shaft S = Insulated Knurled (18 Teeth) U = Insulated Knurled (40 Teeth) Resistance Taper Taper Series followed by Curve Number 5.5 (.217) 4.5 (.177) 10.0 (.394) Mechanical Angle......................280 ° ±10 ° Rotational Torque...............10 to 100 g-cm Detent Torque....................20 to 200 gf-cm Stop Strength........................ 2 kg-cm min. Rotational Life...................... 10,000 cycles Soldering Condition 0.5 L ± (.020) ...............300 °C max. within 3 seconds Hardware............. One flat washer and one A 1.5 hex nut supplied with 1.0 bushing version How To Order L ± 1.2 (.047) 3.8 (.150) 2.0 (.079) Mechanical Characteristics S-Type 0.5 (.020) PTV09A-2 (Vertical/Side Mount, Bushingless, 10 mm Height) 11.4 (.449) 5.0 (.196) RECOMMENDED PCB LAYOUT (HORIZONTAL/REAR MOUNT) 10.6 (.417) +0.2 1.8 -0.0 2 PLCS. +0.008 (.071 ) -0.0 +0.2 2.2 -0.0 2 PLCS. +0.008 (.087 ) -0.0 +0.2 7.0 (.276) 1 +0.2 1.0 -0.0 +0.008 (.039 ) -0.0 RECOMMENDED PCB LAYOUT (VERTICAL/SIDE MOUNT) 2 3 PLCS. 3.3 (.130) 2 3 +0.2 1.0 -0.0 3 PLCS. +0.008 (.039 ) -0.0 5.0 (.197) Standard Resistance Table MM (INCHES) Schematic 2 3 1 8.2 (.323) 1 3 5.0 (.197) DIMENSIONS: 1.8 -0.0 2 PLCS. +0.008 (.071 ) -0.0 +0.2 2.2 -0.0 2 PLCS. +0.008 (.087 ) -0.0 3 PLCS. 0.8 (.031) 7.4 (.291) SCHEMATIC WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Resistance Resistance (Ohms) Code 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 500,000 504 1,000,000 105 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www. bourns.com/docs/legal/disclaimer.pdf. Applications n Commercial communications equipment n Portable electronics n Amplifiers/mixers/drum machines/synthesizers n Consumer goods n Commercial appliances PTV09 Series - 9 mm Potentiometer Product Dimensions (Continued) PTV09A-3 (Vertical/Side Mount, Bushingless, 6.5 mm Height) L ± 5.5 (.217) PTV09A-4 (Horizontal/Rear Mount, Bushingless) 3.8 (.150) 0.5 (.020) 1.2 (.047) 0.8 (.031) 3.8 (.150) L ± 0.5 (.020) 0.5 (.020) 5.1 (.201) 3.5 ± 0.3 (.138 ± .012) L ± F 6.8 (.268) 7.0 ± 0.3 (.276 ± .012) 0.5 (.020) 7.9 (.311) 5.9 4.5 (.232) (.177) 3.0 ± 0.3 6.0 +0.0/-0.1 (.118 ± .012) (.236 +.000/-.004) 1.2 +0/-0.2 (.047 +.000/-.008) FULL CCW POSITION 10.0 (.394) 6.8 (.267) 1 2 FULL CCW POSITION 9.7 (.382) 40 ° ±10 ° 3 S-Type 0.5 L ± (.020) 5.5 (.216) F 5.0 (.196) PTV09A-1 (Horizontal/Rear Mount w/Sleeve Bushing) 0.8 +0/-0.1 0.5 1.5 (.031 +.000/-.004) L ± (.020) (.059) A 11.4 +0/-0.5 (.055 +.000/-.020) 10.0 (.394) F-Type 40 ° ±10 ° L ± 7.9 0.5 (.311) (.020) 1.2 (.047) 6.8 (.268) 1.5 1.0 (.059) 5.5 (.039) (.216) 3.8 (.150) 2.0 (.079) 3 PLCS. 1.5 (.059) 11.4 (.449) 4.5 (.177) 4.5 (.177) F 18 TEETH KNURL 6.0 +0.0/-0.1 (.236 +.000/-.004) 5.0 6.5 DIMENSIONS: 6.8 (INCHES) (.197) .256) (.268) 5.5 DIA. SHAFT SHOWN IN CENTER POSITION (.217) 7.0 (.276) FULL CCW POSITION PTV09A-1 9.7 (Horizontal/Rear Mount w/Sleeve Bushing) (.382) 3 PLCS. 0.8 (.031) 7.4 (.291) 6.0 +0.0/-0.1 (.236 +.000/-.004) MM Shaft Styles S-Type F-Type L ± 2.0 (.079) L ± F 6.0 ± 0.5 (.236 ± .020) 7.0 (.276) 5.0 (.196) F-Type 0.8 (.031) 2.0 (.079) 6.5 (.256) 2.4 (.094) 8.4 (.315) 1.2 (.047) F 2.0 (.078) 3.3 (.129) PTV09A-5 (Horizontal/Rear Mount w/Plastic Plain Bushing) 0.5 (.020) L ± L ± 0.5 (.020) 6.8 (.268) 1.5 (.059) A F 2.0 (.079) 4.5 (.177) 0.5 (.020) U-Type 1.0 3.8 (.039) (.150) L 15 (.591) 20 (.787) 25 (.984) 30 (1.181) L 15 (.591) F 6 (.236) 7 (.275) 12 (.472) 12 (.472) A 7 (.275) 5.5 20 (.217) (.787) 7.0 (.276) 7 (.275) 25 (.984) 0.5 (.020) 40 ° ±10 ° 1.5 (.059) A 4.5 (.177) 5.5 (.216) F 3 PLCS. 40 TEETH KNURL 0.7 1.5 3.1 (.028) (.059) 5.0 (.122) (.196) 11.4 6.0 +0.0/-0.1 (.449) (.236 +.000/-.004) 6.8 (.268) DIA. 15 20 25 30 RECOMMENDED PCB LAYOUT L (.591) (.787) (.984) (1.181) (HORIZONTAL/REAR MOUNT) 18 TEETH KNURL 6.0 +0.0/-0.1 (.236 +.000/-.004) 6.0 +0.0/-0.1 (.236 +.000/-.004) L ± 1.2 (.047) 30 (1.181) 7 7 FULL CCW POSITION (.275)9.7 (.275) (.382) A 6 (.236) 7 7 (.275) 1.8(.275) -0.0 2 PLCS. +0.008 (.071 ) -0.0 +0.2 2.2 -0.0 2 PLCS. +0.008 (.087 ) -0.0 +0.2 7 10.6 (.417) (.275) S-Type Specifications are subject to change without notice. U-Type 40 ° ±10 ° 0.5actual device performance in their specific applications. Users shouldL ± verify 0.5 (.020) herein and this document are subject to specific legal disclaimers L ± The products described (.020) as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. A 1.5 (.059) 1.0 (.039) A 1.5 (.059) 1 5.5 +0.2 2 3 7.0 (.276)  PTV09 Series - 9 mm Potentiometer Product Dimensions (Continued) PTV09A-7 (Vertical/Side Mount w/Sleeve Bushing, 6.5 mm Height) PTV09A-6 (Horizontal/Rear Mount w/Metal Threaded Bushing) L ± 8.4 (.315) 2.0 ± 0.15 (.079 ± .006) 0.5 (.020) 3.5 ± 0.3 (.138 ± .012) L ± 5.0 (.197) 6.8 (.268) 5.5 (.217) 0.5 (.020) L ± 4.5 (.177) 1.2 (.047) 7.0 ± 0.3 (.276 ± .012) 5.9 (.232) 3.0 ± 0.3 (.118 ± .012) 6.8 (.268) 5.5 (.217) 1.2 (.047) 0.5 (.020) 4.5 (.177) F 3.5 (.138) 0.75 M9 X (.030) PTV09A-8 (Vertical/Side Mount w/Sleeve Bushing, 10 mm Height) 6.5 (.256) 2.0 (.078) 2.4 (.094) 6.8 (.267) 3.3 (.129) 1 6.8 (.267) 3.3 (.129) FULL CCW POSITION 9.7 (.382) 40 ° ±10 ° 2 F 3.5 (.138) 2.0 (.078) 2.4 (.094) FULL CCW POSITION 9.7 (.382) 1.2 +0/-0.2 (.047 +.000/-.008) 10.0 (.394) 3 40 ° ±10 ° 0.8 +0/-0.1 1.5 (.031 +.000/-.004) (.059) 11.4 +0/-0.5 (.055 +.000/-.020) 10.0 (.394) 5.5 (.216) 3 PLCS. 0.8 (.031) 7.4 (.291) 5.0 (.196) DIMENSIONS: 5.0 (.197) 5.0 (.196) MM (INCHES) 3 PLCS. 0.8 (.031) 7.4 (.291) 6.5 .256) SHAFT SHOWN IN CENTER POSITION Mounting Hardware M9 X 0.75 (.030) DIA. 9.1 ± 0.3 (.358 ± .012) DIA. 15.0 ± 1.0 (.591 ± .039) 11.0 ± 0.5 (.433 ± .020) 2.0 ± 0.2 (.079 ± .008) 0.4 (.016) THICKNESS Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. A Series Tapers 100 90 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 80 70 60 50 40 30 10 PTV09 Series - 9 mm Potentiometer Derating Curve A6 ): ): A5 A (25 : A4 A) (20 5A): A (1 A2 1 A): (10 5A): A (0 0A (3 20 0 10 20 30 40 50 60 70 80 90 100 Rotational Travel (%) B Series Tapers A Series Tapers 100 80 60 40 33 20 0 80 80 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 100 70 60 50 40 30 6 0 : A ): A5 A) 10 20 30 (40 50 60 70 80 90 100 30 (25A 4 A A): (20 5A): A (1 A2 1 A): (10 5A): A (0 20 Ambient Temperature (°C) 10 0 10 20 30 Tapers 40 50 60 70 80 90 40 30 20 0 100 10 20 30 90 90 A6 A5 ): : 0A 5A) (2 : A4 A) 2 ( 0 5A): A (1 A2 1 A): (10 5A): A (0 (3 20 10 20 30 40 50 60 70 80 90 5 ): B ): B 60 50 40 30 20 30 40 50 60 70 80 90 100 90 100 (3 (25 0C): C C (20 ): C 6 5 C (15 ): C C) 4 (10 : C (05 C): C 2 C) :C 1 30 0 10 20 30 40 50 60 Rotational Travel (%) Rotational Travel (%) B Series Tapers 80 40 10 10 70 60 10 0 100 50 20 100 90 70 20 Rotational Travel (%) 80 80 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 30 70 90 ): B (2B 3 ): B 2 (B ): (1B B ): B (5B 40 60 C Series Tapers (4B Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 60 50 70 50 100 4 (3B 80 70 40 Rotational Travel (%) 1 100 80 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 60 50 10 B Series Tapers A Series Tapers 10 70 Rotational Travel (%) 100 0 (5B (4B ): B ): B 5 4 (3B ): B 3 (2B ): B 2 (B ): (1B B ): B 90 90 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage Rating Power Ratio (%) 1 100 C Series Tapers 100 (5B ): B 5 4 (3B ): B 3 (2B ): B 2 (B ): (1B B ): B 1 100 90 90 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage ): B 80 (4B Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 Rotational Travel (%) 70 80 70 60 50 40 (3 Asia-Pacific: Tel: (25 0C): • Email: asiacus@bourns.com 30 +886-2 2562-4117 C C (20 ): C 6 C) 5 (15 : C eurocus@bourns.com EMEA: Tel: +362088 885 877 • Email: C) 4 (10 : C (05 C): C The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com 2 C) :C 10 1 www.bourns.com 90 100 0 10 20 30 40 50 60 70 80 90 100 Rotational Travel (%) C Series Tapers 100 90 inal 1-2 Output Voltage X 100 (%) inal 1-3 Input Voltage 80 REV.7001/20 Specifications are subject to change without notice. 60 Users should verify actual device performance in their specific applications. 50 The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 40 30 ( (30 C)  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R