PTV111-4220A-B103

*R oH S CO M PL IA N T Features ■ Carbon element ■ Dual gang option ■ Insulated shaft ■ Various taper options ■ Snap-in clip ■ Center detent ■ Center tap option ■ Assorted pin layouts PTV/PTT Series - 12 mm Potentiometer Product Dimensions Electrical Characteristics Taper.................................... Linear, audio Standard Resistance Range ....................... 1 K ohms to 1 M ohms Standard Resistance Tolerance.....±20 % Residual Resistance ................. 1 % max. PTV111-2 PTV111-4 L 8.1 (.318) F 1.5 (.059) 0.5 (.019) 2.0 ± 0.15 (.078 ± .005) L 8.5 (.334) F 1.5 (.059) 0.5 (.019) Environmental Characteristics Operating Temperature .................................-10 °C to +50 °C Power Rating............................ 0.05 Watt Maximum Operating Voltage ............................... 50 V AC, 20 V DC Sliding Noise ...................... 100 mV max. Mechanical Characteristics Mechanical Angle .....................300 ° ±5 ° Rotational Torque ............20 to 200 g-cm Detent Torque ..................30 to 300 g-cm Stop Strength no bushing .................... 3 kg-cm min. with bushing.................. 3 kg-cm min. Rotational Life ................... 15,000 cycles Soldering Condition ............300 °C max. within 3 seconds Hardware ................. One flat washer and mounting nut supplied per potentiometer with bushing 0.5 (.019) 10.0 (.393) +0 3.5 (.137) 4.5 -0.5 +0 (.177-0.019 ) +0 6.0 -0.5 +0 (.236 -0.019 ) 4.0 (.157) 2.0 (.078) 0.5 (.019) 10.0 (.393) +0 11.0 (.433) 3.8 (.150) 3.5 (.137) 6.1 (.240) 2.6 (.102) 30 ° 12.0 (.472) 11.0 (.433) 30 ϒ 12.0 (.472) 11.0 (.433) 4.5 -0.5 +0 (.177-0.019 ) +0 6.0 -0.5 +0 (.236 -0.019 ) 6.7 (.263) 6.7 (.263) +0.1 0.8 -0.1 (.031 +0.003 -0.003 ) TERMINAL DETAIL +0.1 Electrical Diagrams 0.8 -0.1 (.031 +0.003 -0.003 ) MODEL PTV 111 14.4 (.567) 1.6 (.062) 0.8 (.031) 9.4 (.370) RECOMMENDED PCB LAYOUT DUMMY 1 2 3 +0.1 +0.1 2.1 -0.0 (.082 +0.003 -0.0 ) 4 1 MODEL PTV 112 2.0 -0.0 (.078 +0.003 -0.0 ) 10.2 (.401) 2 3 RECOMMENDED PCB LAYOUT +0.1 4 3.3 (.129) +0.2 1.0 -0.0 (.039 +0.007 -0.0 ) DIA. HOLES 4 PLCS. 2.1 -0.0 (.082 +0.003 -0.0 ) 2.5 (.098) 11.0 (.433) 7.5 (.295) 2 1 1 2 3 1 SHAFT SHOWN IN CCW POSITION 3 2.0 -0.0 (.078 +0.003 -0.0 ) 13.6 (.535) 2 3 4 +0.2 1.0 -0.0 (.039 +0.007 -0.0 ) DIA. HOLES 4 PLCS. Dimensions Without Bushing MODEL PTT 111 L 15 (.591) 20 (.787) 22.5 (.886) 25 (.984) 27.5 (1.083) F 4.5 (.177) 7 (.276) 7 (.276) 12 (.472) 12 (.472) 2.5 (.098) 7.5 (.295) SHAFT SHOWN IN CCW POSITION 1 2 3 4 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov DIMENSIONS: MM (INCHES) *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications ■ Audio/TV sets ■ Amplifiers/mixers/drum machines/synthesizers ■ PCs/monitors ■ Appliances PTV/PTT Series - 12 mm Potentiometer Product Dimensions PTV111-1 Dimensions With Bushing PTV111-3 L 7.5 (.295) 5.0 (.196) F 1.5 (.059) 0.5 (.019) L 7.5 (.295) 2.0 (.078) 5.0 (.196) F 1.5 (.059) 0.5 (.019) 10.0 (.393) 10.0 (.393) 4.0 (.157) 2.0 (.078) 3.3 (.129) 3.5 (.137) 2.6 (.102) 12.0 (.472) +0.0 8.0 -0.2 +0.0 (.314 -0.0007 ) 5.4 (.212) 17.5 (.689) 20 (.787) F 7 (.276) 7 (.276) 12 (.472) 12 (.472) MM (INCHES) +0 +0 3.8 (.149) 3.5 (.137) 6.0 -0.5 +0 (.236 -0.019 ) 30 ϒ 12.0 (.472) 8.0 -0.2 +0.0 (.314 -0.0007 ) 5.4 (.212) 30 ϒ 15 (.591) 4.5 -0.5 +0 (.177-0.019 ) +0.0 6.7 (.263) 6.7 (.263) 0.5 (.019) M9x0.75 +0 4.5 -0.5 +0 (.177-0.019 ) +0 6.0 -0.5 +0 (.236 -0.019 ) 12.5 (.492) DIMENSIONS: 0.5 (.019) M9x0.75 L 10.9 8.0 (.315) (.429) 10.9 8.0 (.315) (.429) 11.0 (.433) +0.1 0.8 -0.1 (.031 +0.003 -0.003 ) +0.1 0.8 -0.1 (.031 +0.003 -0.003 ) TERMINAL DETAIL 14.4 (.567) 1.6 (.062) 0.8 (.031) 9.4 (.370) RECOMMENDED PCB LAYOUT +0.1 +0.1 2.1 -0.0 (.082 +0.003 -0.0 ) 2.0 -0.0 (.078 +0.003 -0.0 ) 10.2 (.401) RECOMMENDED PCB LAYOUT +0.1 1 2 3 4 3.3 (.129) +0.2 1.0 -0.0 (.039 +0.007 -0.0 ) DIA. HOLES 4 PLCS. 2.1 -0.0 (.082 +0.003 -0.0 ) 2.0 -0.0 (.078 +0.003 -0.0 ) 13.6 (.535) 2.5 (.098) 11.0 (.433) 7.5 (.295) SHAFT SHOWN IN CCW POSITION 1 2 3 4 +0.2 1.0 -0.0 (.039 +0.007 -0.0 ) DIA. HOLES 4 PLCS. 2.5 (.098) 7.5 (.295) SHAFT SHOWN IN CCW POSITION Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PTV/PTT Series - 12 mm Potentiometer Product Dimensions PTV112-2 DUAL GANG L± Dimensions Without Bushing PTV112-4 DUAL GANG 0.5 (.020) F 3.5 (.138) 2.0 (.078) L± 0.5 (.020) L 15 (.591) 20 (.787) 22.5 (.886) 25 (.984) 27.5 (1.083) F 4.5 (.177) 7 (.276) 7 (.276) 12 (.472) 12 (.472) F DIMENSIONS: 10.0 (.393) +0 4.5 -0.1 +0 (.177-0.039 ) DIA. +0 6.0 -0.1 +0 (.236 -0.039 ) DIA. 4.0 ± 0.5 (.157 ± .020) 3.5 (.138) 2.0 (.079) 2.5 (.098) 3.4 (.134) MM (INCHES) +0 4.5 -0.1 +0 (.177-0.039 ) +0 6.0 -0.1 DIA. +0 (.236 -0.039 ) 10.0 (.393) DIA. 11.0 (.433) 3.8 (.150) 10.6 (.417) 30 ° 12.3 ± 0.5 (.484 ± 0.20) 12.0 (.472) 15.5 ± 0.5 (.610 ± 0.20) 30 ° 9.1 ± 0.3 (.358 ± .012) 6.5 (.256) 13.0 ± 0.5 (.512 ± 0.20) 14.4 (.567) 2.0 (.079) 11.0 (.433) 0.7 (.028) 6.0 (.236) 10.0 (.394) RECOMMENDED PCB LAYOUT 14.5 (.571) RECOMMENDED PCB LAYOUT 2.2 +0.2/-0 2 PLCS. (.087 +.008/-0) 12.3 (.484) 6.0 (.236) 10.0 (.394) 13.6 (.535) 2.0 (.079) 11.0 (.433) 2.0 +0.2/-0 (.079 +.008/-0) 2 PLCS. 1.0 +0.2/-0 (.039 +.008/-0) 6 PLCS. 2.2 ± 0.3 (.087 ± .012) 2 1 1 2 3 3 2.0 (.079) 3.4 (.139) 1.0 ± 0.3 (.254 ± .012) DIA. 6 PLACES 2.0 ± 0.3 (.078 ± .012) 6.0 ± 0.3 (.236 ± .012) 10.0 ± 0.5 (.394 ± 0.20) SHAFT SHOWN IN CCW POSITION SHAFT SHOWN IN CCW POSITION Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PTV/PTT Series - 12 mm Potentiometer Product Dimensions PTV112-1 DUAL GANG L± 7.5 (.295) Dimensions With Bushing PTV112-3 DUAL GANG 0.5 (.020) 5.0 (.197) F 10.0 (.393) 1.5 (.059) 3.5 (.138) 7.5 (.295) 2.0 (.079) L± 0.5 (.020) L 12.5 (.492) 15 (.591) 17.5 (.689) 20 (.787) F 7 (.276) 7 (.276) 12 (.472) 12 (.472) DIMENSIONS: MM (INCHES) 5.0 (.197) F 1.5 (.059) +0 M9xP 0.75 (.030) 4.5 -0.1 +0 (.177-0.039 ) DIA. +0 6.0 -0.1 +0 (.236 -0.039 ) DIA. 4.5 -0.1 +0 (.177-0.039 ) DIA. M9 x 0.75 (.030) +0 DIA. 11.0 (.433) 3.3 (.130) 3.5 (.138) 2.0 (.079) 2.5 (.098) +0 10.0 (.393) 4.2 (.165) 6.0 -0.1 +0 (.236 -0.039 ) 12.0 (.472) 3.3 (.130) 30 ° ± 10 ° 8.0 (.315) 5.9 (.232) 10.8 8.0 (.425) (.315) 12.0 (.472) 30 ° ± 10 ° 8.0 (.315) 10.8 8.0 (.425) (.315) 2.0 (.079) 10.0 (.394) 14.6 (.575) RECOMMENDED PCB LAYOUT 2.0 (.079) 6.0 (.236) 11.5 (.453) RECOMMENDED PCB LAYOUT 2.1 +0.2/-0 2 PLCS. (.083 +.008/-0) 2.0 +0.2/-0 (.079 +.008/-0) 2 PLCS. 1.0 +0.2/-0 (.039 +.008/-0) 6 PLCS. 10.0 (.394) 6.0 (.236) 2.2 +0.2/-0 (.087 +.008/-0) 10.0 (.394) 14.0 (.551) 2.2 +0.2/-0 (.087 +.008/-0) 11.0 (.433) 12.3 (.484) 2.0 (.079) 13.8 (.543) 2.2 +0.2/-0 (.087 +.008/-0) DIA. 6 PLACES 3.3 (.130) 2.0 ± 0.3 (.078 ± .012) 6.0 ± 0.3 (.236 ± .012) 10.0 ± 0.5 (.394 ± 0.20) SHAFT SHOWN IN CCW POSITION SHAFT SHOWN IN CCW POSITION Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PTV/PTT Series - 12 mm Potentiometer Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 Standard Shaft Length • 12 = 12.5 mm* • 15 = 15 mm • 17 = 17.5 mm* • 20 = 20 mm • 22 = 22.5 mm** • 25 = 25 mm** • 27 = 27.5 mm** A Series Tapers 100 90 80 100 70 60 50 40 30 A6 A5 ): : 0A A) (3 (25 A4 A): 2 ( 0 5A): A (1 A2 1 A): (10 5A): A (0 20 10 80 60 40 33 20 0 0 10 20 30 40 50 60 70 80 90 100 Rotational Travel (%) B Series Tapers 0 100 10 20 30 40 50 60 70 80 90 100 1 Center Detent Option • 4 = No Detent • 2 = Center Detent Derating Curve Rating Power Ratio (%) Pin Style PC Pins vertical/ Down Facing: • 1 = With Bushing • 2 = No Bushing PC Pins horizontal/ Rear Facing: • 3 = With Bushing • 4 = No Bushing Resistance Code 102 202 502 103 203 503 104 204 504 105 90 Ambient Temperature (°C) Shaft Styles • A = Flat Type Insulated Shaft Resistance Taper (See Taper Chart) Taper Series followed by Curve Number Resistance Code (See Table) Other styles available. (5B ( 4B ): B ): B 5 4 (3B ): B 3 (2B ): B 2 (B ): (1B B ): B PTV111 - 2 4 20 A - A1 104 Model (See Diagrams) • PTV111 Standard • PTT111 With Tap • PTV112 Dual Gang Tapers Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage Standard Resistance Table 80 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage How To Order 70 60 50 40 30 20 * Available with Pin Styles 1 & 3 only. **Available with Pin Styles 2 & 4 only. 10 0 10 20 30 40 50 60 70 80 90 100 70 80 90 100 Rotational Travel (%) C Series Tapers 100 90 Terminal 1-2 Output Voltage X 100 (%) Terminal 1-3 Input Voltage 80 Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com 70 60 50 40 (3 (25 0C): C C (20 ): C 6 5 C (15 ): C 4 C (10 ): C C (05 ): C 2 C) :C 1 30 20 10 0 10 20 30 40 50 60 Rotational Travel (%) REV. 10/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL