PTVS10-076C-M

Features n 10 kA, 8/20 µs surge capability Applications n High power DC bus protection n 800 A, 10/350 μs surge capability n Low clamping voltage under surge n Bidirectional TVS n Surface mount package n Excellent overtemperature performance PTVS10-xxxC-M Series High Current TVS Diodes General Information Agency Recognition Bourns Model PTVS10-xxxC-M high current bidirectional TVS diodes are designed for use in high power DC bus clamping applications. These devices offer bidirectional port protection and are available with standoff voltage ratings of 66 V and 76 V. ® Description UL File Number: E215609 The devices are RoHS* compliant and are designed to meet IEC 61000-4-5 8/20 μs current surge requirements. Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Rating PTVS10-066C-M PTVS10-076C-M Repetitive Standoff Voltage Peak Current Rating per 8/20 µs IEC 61000-4-5 Symbol Value Unit VWM 66 76 V IPPM Peak Current Rating per 10/350 µs IPPM Operating Junction Temperature Range TJ Storage Temperature Range TS 10 kA 800 A -55 to +125 °C -55 to +150 °C Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter ID Standby Current V(BR) Breakdown Voltage VC Clamping Voltage (1) V(BR) Temperature Coefficient C Capacitance Test Conditions VD = VWM IBR = 10 mA PTVS10-066C-M PTVS10-076C-M IPP = 10 kA PTVS10-066C-M PTVS10-076C-M F = 10 kHz, Vd = 1 Vrms PTVS10-066C-M PTVS10-076C-M Note: (1) VC measured at the time which is coincident with the peak surge current. Min. Typ. Max. Unit 10 µA 72 85 76 90 80 95 V 120 135 V 0.1 %/°C 6.7 5.5 nF Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. PTVS10-xxxC-M Series High Current TVS Diodes Performance Graphs Typical VBR vs. Junction Temperature 12 10 8 Normalized to 25 °C 6 4 2 0 -2 -4 -6 -8 -10 -12 -40 -20 0 20 40 VBR Change vs. Temperature (%) VBR Change vs. Temperature (%) V-I Characteristic 12 10 8 Normalized to 25 °C 6 4 2 0 -2 -4 -6 -8 60 80 -10 100 Junction Temperature -12(°C) -40 Percent of Rated Value Percent of Rated Value 120 110 100 90 80 70 60 50 40 30 20 25 50 75 100 125 150 175 10 Ambient Temperature (°C) 0 25 versus 50 75 0 This graph shows the typical device surge current derating ambient temperature when subjected to the 8/20 µs current waveform Ambient per the IEC 61000-4-5 specification. This device is not intended for continuous operation at temperatures above 125 °C. Application 120 80 60 40 0 100 125 Temperature (°C) 20 40 Exposed DC Power Interface Test Wave tt = 8 µs td = 20 µs 100 80 0 5 150 175 10 15 40 td = t|IPP/2 2020 t – Time (µs)0 0 25 5 30 10 15 t – Time (µs) + Exposed DC Power Interface - 8 Junction Temperature ( + A typical application for Power TVS products includes DC power line protection. 60 td = t|IPP/2 60 20 0 140 Test Waveform Parameters tt = 8 µs td = 20120 µs 100 IPP – Peak Pulse Current (% of IPP) 120 110 100 90 80 70 60 50 40 30 20 10 0 0 -20 Current 8/20 µs Waveform per IEC 61000-4-5 IPP – Peak Pulse Current (% of IPP) Typical Surge Current Derating 120 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 2  PTVS10-xxxC-M Series High Current TVS Diodes Product Dimensions Recommended Pad Layout This is an RoHS compliant*, molded package with 100 % Sn on the terminations, and a flammability rating of UL 94-V-0. E E 5.33 (0.210) 2.15 5.33 (0.085) (0.210) 2.15 (0.085) 2.54 (0.100) D D 2.70 (0.106) E1 10.80 (0.425) 2.70 (0.106) 18.31 (0.721) E1 13.72 10.80 (0.540) (0.425) 13.72 (0.540) 18.31 (0.721) DIMENSIONS: A 2.54 (0.100) MM (INCHES) A C L C Typical Part Marking L MANUFACTURER’S TRADEMARK b b b1 b1 L1 L1 XXXXX YYWWP L2 L2 LLLLL Dim. A b b1 C D E E1 L L1 L2 Min. 6.94 (0.273) 5.15 (0.203) 10.55 (0.415) 0.37 (0.015) 13.45 (0.530) 17.85 (0.703) 15.50 (0.610) 2.30 (0.091) 2.50 (0.098) 13.16 (0.518) Max. 7.24 (0.285) 5.65 (0.222) 11.05 (0.435) 0.45 (0.018) 14.60 (0.575) 18.72 (0.737) 16.05 (0.632) 2.80 (0.110) 2.90 (0.114) 13.76 (0.518) Mold flash or protrusion shall not exceed 0.25 mm. DIMENSIONS: 5-DIGIT PRODUCT CODE: • 1ST & 2ND DIGITS INDICATE PRODUCT FAMILY 10 = PTVS10-xxxC-M SERIES • 3RD, 4TH & 5TH DIGITS INDICATE REPETITIVE STANDOFF VOLTAGE 066 = 66 V 076 = 76 V MANUFACTURING DATE CODE: • 1ST & 2ND DIGITS INDICATE YEAR • 3RD & 4TH DIGITS INDICATE WEEK NUMBER • 5TH ALPHA CHARACTER INDICATES LOT CODE MANUFACTURING LOT CODE: • ALL 5 DIGITS INDICATE LOT CODE How to Order PTVS 10 - xxx C-M Series PTVS = Power TVS High Current Diode Peak Current Rating 10 = 10 kA Repetitive Standoff Voltage 066 = 66 V 076 = 76 V Suffix C = Bidirectional Device M = Surface Mount Environmental Specifications Moisture Sensitivity Level.................................................................1 ESD Classification (HBM)............................................................. 3B MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  PTVS10-xxxC-M Series High Current TVS Diodes Packaging Information The product will be dispensed in tape and reel format (see diagram below). 2.00 ± 0.10 (.079 ± .004) 4.00 ±0.10 (.157 ± .004) 1.50 +0.1/-0 DIA. (.059 +.004/-0) 20.00 ± 0.10 (.787 ± .004) 1.75 ± 0.10 (.069 ± .004) 14.20 ± 0.10 (.559 ± .004) 32.00 ± 0.30 (1.260 ± .012) 18.95 (.746) 28.40 ± 0.10 (1.118 ± .004) 8.00 (.315) 14.20 (.559) 17.80 (.701) 2.00 DIA. (.079) 7.45 (.039) DIMENSIONS: MM (INCHES) USER DIRECTION OF FEED 400 PCS. PER REEL 330.0 ± 1.5 DIA. (12.992 ± .059) 38.40 (1.512) MAX. 2.2 ± 0.2 (.087 ± .008) SEE DETAIL A 13.0 +0.5/-0.2 (.512 +.020/-.008) DIA. 17.2 ± 0.2 (.677 ± .008) 100.0 ± 1.5 (3.937 ± .059) DIA. DETAIL A REV. 07/19 32.40 + 2.00/-0 (1.276 ±.079/-.0) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL