PV36W254C01B00

Features n Multiturn / Cermet / Sealed n Available in both top and side adjustment n Units can be pre-adjusted at clockwise, counter-clockwise or standard 50 % position n Standoffs allow thorough PC board washing n Chevron seal design n RoHS compliant* n For trimmer applications/processing guidelines, click here PV36 Series – Lead Sealed Type Multiturn Trimming Potentiometer Product Dimensions Additional Information Common Dimensions Click these links for more information: 6.40 ± 1.32 (.252 ± .052) 10.03 (.395) 1.52 (.060) 1.27 ± 0.1 (.050 ± .004) .38 MIN. (.015) 2.54 (.100) 2.54 (.100) .51 ± .03 DIA. (.020 ± .001) PV36W PRODUCT TECHNICAL INVENTORY SAMPLES LIBRARY 9.53 (.375) .76 DEEP (.030) PV36Y 2.41 (.095) 2.54 (.100) 1.14 (.045) 2.54 (.100) 3 3 2 2.54 1 (.100) 2.54 (.100) PV36X 2 1 2.54 (.100) PV36Z 2.54 (.100) 1.14 (.045) 2.54 (.100) 3 3 2 2 2.54 1 (.100) 2.54 (.100) 2.41 (.095) 1 2.54 (.100) Temperature Cycle DTR����������������������������������������������±2 % DV.S.S.�����������������������������������������±1 % Humidity ������� ±2 % DTR; 100 megohms IR min. Vibration��� 20 G (1 % DTR; 1 % DV.S.S.) Shock���� 100 G (1 % DTR; 1 % DV.S.S.) Temperature Load Life ������������������������� 3 % DTR; 1 % DV.S.S. Low Temperature Exposure ������������������������� 2 % DTR; 1 % DV.S.S. High Temperature Exposure ������������������������� 3 % DTR; 1 % DV.S.S. Rotational Life RV1K ohm, RU500K ohm����±5 % DTR 1K ohm FRF500K ohm��������±3 % DTR ΔTR: Total Resistance Change ΔV.S.S.: Voltage Setting Stability IR: Insulation Resistance Schematic PV36P 2 2.54 (.100) 3 8.26 ± .64 (.325 ± .025) 2.54 (.100) 2 DIMENSIONS: TOLERANCES: ± 1 5.23 (.206) 2.54 (.100) CONTACT Environmental Characteristics 1.27 ± 0.1 (.050 ± .004) ADJ. SLOT 2.19 DIA. (.086) .56 WIDE X (.022) X 4.83 ± .13 (.190 ± .005) 0.3 (.012) MM (INCHES) EXCEPT WHERE NOTED CCW WIPER 3 1 CW CLOCKWISE Recommended PCB Layout PV36W & PV36X (3) (2) (1) 0.9 (.035) 3 PLCS. 2.5 (.098) 2.5 (.098) PV36Y, PV36Z & PV36P 2.5 (.098) 2.5 (.098) (1) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. (3) 0.9 (.035) 3 PLCS. 2.5 (.098) (2) DIMENSIONS: TOLERANCES: ± 0.1 (.004) MM (INCHES) EXCEPT WHERE NOTED  PV36 Series – Lead Sealed Type Multiturn Trimming Potentiometer Electrical Characteristics Model Number PV36x100C01B00 PV36x200C01B00 PV36x500C01B00 PV36x101C01B00 PV36x201C01B00 PV36x501C01B00 PV36x102C01B00 PV36x202C01B00 PV36x502C01B00 PV36x103C01B00 PV36x203C01B00 PV36x253C01B00 PV36x503C01B00 PV36x104C01B00 PV36x204C01B00 PV36x254C01B00 PV36x504C01B00 PV36x105C01B00 PV36x205C01B00 Power Rating @ 70 °C (W) 0.5 Number of Turns (Effective Rotation Angle) 25 Total Resistance Value (Ω) 10 20 50 100 200 500 1k 2k 5k 10k 20k 25k 50k 100k 200k 250k 500k 1M 2M Resistance Tolerance TCR (ppm/°C) ±150 ±10 % ±100 Operating Temperature Range: -55 to +125 °C Soldering Method: Wave (Single and Dual) “x” denotes Adjustment Direction and Lead Type (Top or Side Direction, Inline or Triangle Lead) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  PV36 Series – Lead Sealed Type Multiturn Trimming Potentiometer Typical Part Marking 3-Digit Date Code and Manufacturing Code – First digit indicates year of manufacture; – Last two digits indicate week of manufacture; – 4th digit is suffix for manufacturing location: C = Costa Rica EX: 604C = Manufactured in 2016, week 4, Costa Rica Resistance Code – Resistance code marking as shown in the Standard Resistance Table. How To Order PV 36 W 103 C01 B00 Product ID PV = Trimming Potentiometer Series 36 = Lead Sealed 10 mm Square, 25-turns Adjustment Direction/ Lead Type W = Top, Inline X = Side, Inline Y = Top, Triangle Z = Top, Triangle P = Side, Triangle Resistance Code See Standard Resistance Table Individual Specification C01 = Standard Type Packaging B00 = Tube (50 pcs. per tube) Standard Resistance Table Resistance (Ohms) 10 20 50 100 200 500 1,000 2,000 5,000 10,000 20,000 25,000 50,000 100,000 200,000 250,000 500,000 1,000,000 2,000,000 Resistance Code 100 200 500 101 201 501 102 202 502 103 203 253 503 104 204 254 504 105 205 Popular distribution values listed in boldface. Special resistances available. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 08/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL