PVG3.pdf
08/19
Trimmer Potentiometers
SMD Sealed Type Single-Turn PVG3 Series
3.6
(.142)
Features
ADJ. SLOT
2.2 DIA.
(.087)
.45
WIDE
X
(.018)
.40
DEEP
X
(.016)
1. Surface Mount 3 mm Square / Single-turn / Cermet / Sealed
2. Available in J-hook, gull-wing and reverse gull-wing pin styles
3. Units can be pre-adjusted at clockwise, counter-clockwise
or standard 50 % position
3.4
(.134)
3
1
2.3
(.091)
4. 3 mm design meets EIA/EIAJ/IPC/VECI SMD standard
trimmer footprint
5. RoHS compliant*
3.6
(.142)
1.1
(.043)
ADJ. SLOT
2.2 DIA.
(.087)
0.50
WIDE
X
(.020)
0.55
DEEP
X
(.022)
2.8
(.110)
3.4
(.134)
2
3
0.8 ± 0.2
(.031 ± .008)
2.3
(.091)
5.8
(.228)
2.7
(.106)
ADJ. SLOT
2.2 DIA.
(.087)
.45
WIDE
X
(.018)
.40
DEEP
X
(.016)
2 PLCS.
0.1
(.004)
MIN.
2.8
(.110)
0.5
2 PLCS.
(.020)
1.00 ± 0.15
(.039 ± .006)
0.75 ± 0.15
(.030 ± .006)
3.6
(.142)
2.5
(.098)
2.0
(.079)
1
0.6
(.024)
MIN.
0.1
(.004)
3.6
(.142)
PVG3A
6. Metal cover for thermal protection/heat transfer
7. Units tested under 85 °C water test for 60 seconds, no bubbles
PVG3K
2.0
(.079)
2
3
2.3
(.091)
0.5
(.020)
2.0
(.079)
2
3.4
(.134)
MIN.
0.1
(.004)
1
1.00 ± 0.15
(.039 ± .006)
4.5
(.177)
PVG3G
2.7
(.106)
Circuit
0.75 ± 0.15
(.030 ± .006)
#2 (Wiper)
#1
#3
DIMENSIONS:
Clockwise
MM
(INCHES)
TOLERANCES: ± 0.25
(.010)
EXCEPT WHERE NOTED
Top Adjustment (Standard J-Hook Style)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Power Rating
(W)
PVG3A100C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
10 ohm ± 20%
±150
Mechanical Rotation
Angle
Total Resistance Value
PVG3A200C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
20 ohm ± 20%
±150
PVG3A500C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
50 ohm ± 20%
±150
PVG3A101C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
100 ohm ± 20%
±150
PVG3A201C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
200 ohm ± 20%
±150
PVG3A501C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
500 ohm ± 20%
±150
PVG3A102C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
1k ohm ± 20%
±150
PVG3A202C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
2k ohm ± 20%
±150
PVG3A502C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
5k ohm ± 20%
±150
PVG3A103C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
10k ohm ± 20%
±150
PVG3A203C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
20k ohm ± 20%
±150
PVG3A503C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
50k ohm ± 20%
±150
PVG3A104C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
100k ohm ± 20%
±150
PVG3A204C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
200k ohm ± 20%
±150
PVG3A504C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
500k ohm ± 20%
±150
PVG3A105C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
1M ohm ± 20%
±150
PVG3A205C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
2M ohm ± 20%
±150
Operating Temperature Range: -55 to +125 °C
Soldering Method: Reflow / Soldering Iron
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar. 31, 2015 and Annex.
Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
PVG3.pdf
08/19
Top Adjustment (Gull-Wing Style)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Power Rating
(W)
PVG3G100C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
10 ohm ± 20%
±150
Mechanical Rotation
Angle
Total Resistance Value
PVG3G200C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
20 ohm ± 20%
±150
PVG3G500C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
50 ohm ± 20%
±150
PVG3G101C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
100 ohm ± 20%
±150
PVG3G201C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
200 ohm ± 20%
±150
PVG3G501C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
500 ohm ± 20%
±150
PVG3G102C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
1k ohm ± 20%
±150
PVG3G202C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
2k ohm ± 20%
±150
PVG3G502C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
5k ohm ± 20%
±150
PVG3G103C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
10k ohm ± 20%
±150
PVG3G203C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
20k ohm ± 20%
±150
PVG3G503C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
50k ohm ± 20%
±150
PVG3G104C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
100k ohm ± 20%
±150
PVG3G204C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
200k ohm ± 20%
±150
PVG3G504C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
500k ohm ± 20%
±150
PVG3G105C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
1M ohm ± 20%
±150
PVG3G205C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
2M ohm ± 20%
±150
Mechanical Rotation
Angle
Total Resistance Value
TCR
(ppm/°C)
Operating Temperature Range: -55 to +125 °C
Soldering Method: Reflow / Soldering Iron
Rear Adjustment (Reverse Gull-Wing Style)
Part Number
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
PVG3K100C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
10 ohm ± 20%
±150
PVG3K200C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
20 ohm ± 20%
±150
PVG3K500C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
50 ohm ± 20%
±150
PVG3K101C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
100 ohm ± 20%
±150
PVG3K201C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
200 ohm ± 20%
±150
PVG3K501C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
500 ohm ± 20%
±150
PVG3K102C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
1k ohm ± 20%
±150
PVG3K202C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
2k ohm ± 20%
±150
PVG3K502C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
5k ohm ± 20%
±150
PVG3K103C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
10k ohm ± 20%
±150
PVG3K203C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
20k ohm ± 20%
±150
PVG3K503C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
50k ohm ± 20%
±150
PVG3K104C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
100k ohm ± 20%
±150
PVG3K204C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
200k ohm ± 20%
±150
PVG3K504C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
500k ohm ± 20%
±150
PVG3K105C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
1M ohm ± 20%
±150
PVG3K205C01
0.25 (70 °C)
1 (210 ° ±10 °)
250 ± 10 °
2M ohm ± 20%
±150
Operating Temperature Range: -55 to +125 °C
Soldering Method: Reflow / Soldering Iron
Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
.
PVG3.pdf
08/19
Standard Land Patterns
PVG3A
1.4
(.055)
PVG3K
PVG3G
1.4
(.055)
0.9
(.035)
1.3
(.051)
2.1
(.083)
0.9
(.035)
1.1
(.043)
2.5
(.098)
1.3
(.051)
2.1
(.083)
1.1
(.043)
1.1
(.043)
1.2
(.047)
3.1
(.122)
2.5
(.098)
1.0
(.039)
MM
(INCHES)
Characteristics
3.1
(.122)
1.1
(.043)
1.2
(.047)
DIMENSIONS:
1.0
(.039)
1.5
(.059)
1.2
(.047)
1.1
(.043)
TOLERANCES: ± 0.1
(.004)
EXCEPT WHERE NOTED
1.2
(.047)
Part Numbering
Temperature
Cycle
ΔTR
: ±2%
ΔV.S.S.: ±1%
Humidity
ΔTR
IR
Vibration (20G)
ΔTR
: ±1%
ΔV.S.S.: ±1%
Shock (100G)
ΔTR
: ±1%
ΔV.S.S.: ±1%
Temperature
Load Life
ΔTR
: ±3% or 3 ohm max., whichever is greater
ΔV.S.S.: ±1%
Low Temperature
Exposure
ΔTR
: ±2%
ΔV.S.S.: ±2%
High Temperature
Exposure
ΔTR
: ±3%
ΔV.S.S.: ±2%
Rotational Life
ΔTR
ΔTR
: Total Resistance Change
ΔV.S.S.: Voltage Setting Stability
IR
: Insulation Resistance
: ±2%
: 10M ohm min.
: R≤100 kohm
±3% or 2 ohm max., whichever is greater
R>100 kohm
+0/-10% (50 cycles)
Product ID
PV = Trimming Potentiometer
PV G3 A 103 C01 R00
Series
G3 = SMD Sealed 3 mm Square, Single-Turn
Pin Style
A = J-Hook
G = Gull-Wing
K = Reverse Gull-Wing
Total Resistance
Expressed by three figures.
The first and second figures are
significant digits; the third figure expresses
the number of zeros that follow.
Resistance
(Ohms)
10
20
50
100
200
500
1,000
2,000
5,000
10,000
20,000
50,000
100,000
200,000
500,000
1,000,000
2,000,000
Resistance
Code
100
200
500
101
201
501
102
202
502
103
203
503
104
204
504
105
205
Popular distribution values listed in boldface.
Special resistances available.
Individual Specification
C01 = Standard Type
Packaging
R00 = Tape and Reel (1,000 pcs./7 ” reel)
Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R