Q112074

AV DI TH AIL ST RO AB RI U LE BU GH TI ON Features ■ ■ ■ ■ SMD Single-Turn / Cermet / Industrial Open Frame Cross slot rotor designs suitable for automatic adjustment equipment Supplied in 12mm embossed tape, compatible with automatic pick-and-place assembly equipment Recommended for reflow solder processing only 3364 - 4mm Square Trimming Potentiometer Electrical Characteristics Standard Resistance Range .......................100 ohms to 1 megohm (see standard resistance table) Resistance Tolerance .............±25% std. End Resistance 1K..................................................2% Contact Resistance Variation (Voltage Divider) .....................5% max. Resolution.....................................Infinite Adjustment Angle.....................260°±20° 3364A, B 3-Terminal Common Dimensions 3364W, X 3-Terminal 3.80 (.150) 2.50 ± 0.15 (.098 ± .006) 0.55 ± 0.15 (.022 ± .006) 2 Environmental Characteristics Power Rating (50 volts max.) 70°C.........................................0.2 watt Temperature Range ...................................-40°C to +125°C Temperature Coefficient .........................................±250ppm/°C Humidity..................500 hours (5% ∆TR) Load Life .................................500 hours 0.2 watt @ 70°C (5% ∆TR) Rotational Life .......20 cycles (15% ∆TR) ADJ. CROSS SLOT 0.55 ± .15 WIDE X (.022 ± .006) 0.35 X DEEP X (.014) 2.00 (.079) 2.20 (.087) 1 X 3 2.50 ± 0.15 (.098 ± .006) 0.55 ± 0.15 (.022 ± .006) 2.30 (.091) 4.50 (.177) 3.80 (.150) 2.50 LONG (.098) 4.20 2.00 (.165) (.079) 2.20 (.087) 1 2 3 1.50 MAX. (.059) 1.50 MAX. (.059) 1.40 (.055) Physical Characteristics Torque..............................20 to 200g-cm Mechanical Angle .................Continuous Marking ........................Resistance code, manufacturer's full part number and date code on packaging Terminals...........................Solder coated Standard Packaging ..................................1000 pcs./7" reel Adjustment Tool ..............................H-90 Reflow solder processing recommended 2 0.80 (.031) 1.50 (.059) 0.50 (.020) 2.00 (.079) 1.40 (.055) .12 (.047) 3 3 0.80 (.031) 0.80 (.031) 1.90 (.075) 1.00 (.039) 1 0.95 (.037) 1.60 (.063) 0.95 (.037) 1 1.35 (.053) 1.20 (.047) 0.99 (.039) 2 0.80 (.031) How To Order 3364 X - 1 - 103 E SUGGESTED PWB LAYOUT SUGGESTED PWB LAYOUT 2.40 (.094) Model 2.40 (.094) Style 1.10 (.043) Orientation of parts in tape: Styles W,A Terminals toward sprocket holes 5.10 (.201) Styles X,B Terminals away from sprocket holes 1.60 (.063) Standard Product Consult factory for other available options. 2 CCW 1.20 (.047) 1.30 (.051) Resistance Code Embossed Tape Designator E = 1000 pcs./7" reel (-1 standard) G = 5000 pcs./14.5" reel (-1 optional) 1.20 (.047) 1.50 (.059) 1.30 (.051) 0.60 (.024) 0.80 (.031) WIPER 3 1 5.08 1.10 (.200) (.043) 1.50 (.059) 1.20 (.047) 0.60 (.024) CW CLOCKWISE TOLERANCES: ± 0.25 (.010) EXCEPT WHERE NOTED DIMENSIONS ARE: METRIC (INCHES) Specifications are subject to change without notice. 3364 - 4mm Square Trimming Potentiometer Packaging Specifications Standard Resistance Table 2.20 ± 0.20 (.087 ± .008) 0.60 (.024) 5.51 ± 0.05 (.217 ± .002) 4.00 ± 0.10 (.157 ± .004) W, A ORIENTATION 8.00 ± 0.10 (.315 ± .004) 2.00 ± 0.10 (.079 ± .004) 1.50 ± 0.10 DIA. (.059 ± .004) X, B ORIENTATION 4.30 ± 0.20 (.169 ± .008) 5.00 ± 0.20 (.197 ± .008) 1.75 ± 0.10 (.069 ± .004) 12.00 ± 0.30 (.472 ± .012) TAPE 178 ± .20 DIA. (7.008 ± .008) EQUAL SPACED 3 PLCS. 1.50 MIN. (.059) 13.00 ± 0.51 DIA. (.512 ± .020) 1.20 ± .05 (.047 ± .002) 50.00 (1.969) REF. 21.01 ± 0.76 DIA. 13.00 ± 1.50 (.827 ± .030) (512 ± .060) REEL Conforms with EIA specification RS-481. Specifications are subject to change without notice. Resistance (Ohms) 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 Resistance Code 101 201 501 102 202 502 103 203 503 104 204 504 105 Part Marking 12 22 52 13 23 53 14 24 54 15 25 55 16 Popular values listed in boldface. Special resistances available.