SD10A-5DA

SD10A SERIES HDLV Family Description The SD10A is a full-featured, dual output, non-isolated DC-DC converter providing over 66 watts of power in a small 3.3 " SIP These high efficiency . converters have two 10 amp outputs to power today's microprocessors, ASICs, and DSPs. Each output uses an external trim resistor to set the output voltage, allowing variable control. The outputs come up simultaneously and each output has a separate on/off control, allowing them to be sequenced. Both outputs include short circuit protection and have remote sense. A phase-shifted-synchronization approach significantly reduces ripple and noise on the input line. The SD10A uses Bourns Switch Power's patented V2™ technology to ensure extremely fast transient response. Features • Dual 10 Amp Outputs • 90 % Efficiency • Independent Programmable Outputs • Low 0.5 " Profile • Phase Shifted Synchronization • Short Circuit Protection with auto-restart • Remote Sense • Improved Input Filtering • Fast Transient Response • High-temperature Operation • Remote Enable Each Output • Accepts Output Pre-charge • Simultaneous Startup • EN55022 Class A General MTBF Operating Temperature Storage Temperature Switching Frequency Input Voltage Current Remote Enable High = Disable Low = Enable Min 4.5 3.0 Common Specifications Nom 5 3.3 Max 5.5 3.6 15 Units Vdc Vdc A Vdc Vdc Notes 3.15 Vin min if Vout>2.2 V each output 2.4 0.4 Open = Enable Outputs (each output) Current 0 Current Limit 11 Line Regulation Load Regulation Ripple Dynamic Response 0 to 100 % load 100 to 0 % load Cross Regulation Temperature Regulation 10 ±5 ±7 100 100 100 100 100 0 ±0.01 A A mV mV mV pp mV µs mV µs mV %/°C over full line range over full load range ∆i/∆t = 0.2 A/µs ∆i/∆t = 0.2 A/µs 755 -25 -40 -55 200 300 85 85 125 Patent Pending k Hrs °C °C °C kHz kHz 25 °C, 60 % load Option 3.3 V input 5 V input Asia-Pacific: TEL +886- (0)2 25624117 • FAX +886- (0)2 25624116 Europe: TEL +41-41 768 5555 • FAX +41-41 768 5510 The Americas: TEL +1-951 781 5500 • FAX +1-951 781-5700 Reliable Electronic Solutions www.bourns.com Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SD10A SERIES HDLV Family SD10A-3DA SD10A-5DA Input (V) 3.3 5 Vout1 (V) 1 - 2.5 Electrical Specifications Iout1 (A) 10 10 Vout2 (V) 1 - 2.5 Iout2 (A) 10 10 Noise Efficiency (mV pp) max (%) typ 100 90 100 91 1 - 3.5 1 - 3.5 Each output separately adjustable using an external trim resistor from TRIM to GND. See application circuit below. Standard Options Add option designators to the end of the part number. Example: SD10A-3DA-Z Option Description Z -40 °C operation 3.3 (84.5) 0.5 (12.7) 1 0.145 ±0.015 (3.68 ±0.38) inches (mm) 0.xx ±0.01 inches 0.xxx ±0.005 inches 5 6 0.6 (15.24) 12 0.5 (12.7) 13 16 17 19 20 24 0.1 (2.54) 0.4 0.3 (10.16) (7.62) 0.3 (7.62) 0.4 0.2 (10.16) (5.08) 0.2 0.2 (5.08) (5.08) Pin 17 18 19 20 21 22 23 24 Trim1 or Trim2 SD10A-5DA RTrim = [(23.33) / (Vout - 1)] - 8.87 (kΩ) RTrim Vout 1.3 1.5 1.8 1.9 2.2 2.3 2.5 3.3 RTrim (kΩ) 68.1 37.4 20.0 16.9 10.5 9.09 6.65 1.27 SD10A-3DA RTrim = [(14.04) / (Vout - 1)] - 8.87 (kΩ) Vout 1.3 1.5 1.8 1.9 2.2 2.3 2.5 RTrim (kΩ) 37.4 19.1 8.66 6.65 2.80 1.91 0.487 Pin 1 2 3 4 5 6 7 8 Pin Description 9 GND 10 GND 11 Vout1 Vout1 12 Vout1 13 Enable1 14 Remote Sense1 15 Trim1 16 Description GND GND Vin Vin Vin Vin GND GND Description Trim2 Remote Sense2 Enable2 Vout2 Vout2 Vout2 GND GND SD10A 100µf / 10V Tantalums Vin Vout1 100µf / 10V Tantalum Vout2 100µf / 10V Tantalum REV. 02/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.