SDE1006A-470K

* A E Ro H C- S C Q2 O 0 0 MP QU LIA AL NT IF IE D Features ■ High saturation current - up to 8 A & ■ Inductance range: 1.5 to 820 µH ■ Heating current up to 7.2 A ■ AEC-Q200 qualified ■ RoHS compliant* and halogen free** SDE1006A Series - SMD Power Inductors Bourns Part Number SDE1006A-1R5M SDE1006A-2R2M SDE1006A-3R3M SDE1006A-3R9M SDE1006A-4R7M SDE1006A-5R6M SDE1006A-6R8M SDE1006A-8R2M SDE1006A-100M SDE1006A-120M SDE1006A-150M SDE1006A-180M SDE1006A-220M SDE1006A-270M SDE1006A-330M SDE1006A-390M SDE1006A-470K SDE1006A-560K SDE1006A-680K SDE1006A-820K SDE1006A-101K SDE1006A-121K SDE1006A-151K SDE1006A-181K SDE1006A-221K SDE1006A-271K SDE1006A-331K SDE1006A-391K SDE1006A-471K SDE1006A-561K SDE1006A-681K SDE1006A-821K Inductance General Specifications L (μH) Tol. (%) Test Freq./Voltage 1.5 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 MHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V 1 KHz / 1 V How to Order SRF (MHz) Typ. DCR (Ω) Max. I rms (A) I sat (A) 69.6 57.7 48.8 40.6 37.4 35.6 32.1 27.9 25 23 19.8 19.3 16 13.3 12.1 12 11 10.2 9.4 8.8 7.3 6.6 6.6 6.1 5.3 4.3 4.3 3.3 3.3 3.3 2.8 2.2 0.018 0.021 0.024 0.027 0.036 0.04 0.044 0.048 0.06 0.07 0.08 0.09 0.1 0.11 0.12 0.14 0.17 0.19 0.22 0.25 0.35 0.4 0.47 0.63 0.73 0.97 1.15 1.3 1.48 1.9 2.25 2.55 7.2 6.0 5.4 5.2 4.7 4.5 4.2 4.1 3.8 3.6 3.4 2.8 2.6 2.3 2.2 1.9 1.8 1.7 1.6 1.5 1.3 1.2 1.1 1.0 0.85 0.75 0.7 0.65 0.6 0.55 0.5 0.45 8.0 6.6 6.0 5.7 5.2 5.0 4.6 4.3 4.0 3.8 3.6 3.0 2.8 2.5 2.4 2.1 1.95 1.8 1.7 1.6 1.4 1.3 1.2 1.1 1.0 0.85 0.75 0.7 0.65 0.6 0.55 0.5 Electrical Schematic Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature ................................-40 °C to +125 °C Temperature Rise ......................40 °C typ. at rated I rms Inductance Drop .......... 10 % typ. at I sat Materials Core ..............................................Ferrite Wire ............................Enameled copper Terminal Finish .........................Ag/Ni/Sn Packaging .................... 800 pcs. per reel Product Dimensions 10.00 ± 0.4 (.394 ± .016)  Electrical Specifications @ 25 °C 9.00 ± 0.4 (.354 ± .016) 5.40 ± 0.4 (.241 ± .016) 2.70 REF. (.106) Recommended Layout SDE1006A - 100M Model 9.50 ± 0.4 (.374 ± .016) Value Code (see table) 2.50 (.098) 10.00 (.394) WARNING Cancer and Reproductive Harm DIMENSIONS: MM (INCHES) www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SDE1006A Series - SMD Power Inductors Soldering Profile Peak Temperature: 245 °C max. Max. Peak Temperature -5 °C: 30 sec. max. Max. Time Above 217 °C : 60~150 sec. max. Temperature Rising Area Preheat Area Reflow Area Forced Cooling Area +4.0 °C/Sec. Max. 150~200 °C / 60~120 Sec. +3.0 °C/Sec. Max. -(1.0~5.0) °C/Sec. Max. Peak Temperature: 245 °C Temperature (°C) 250 217 °C 60~150 Sec. 200 60 Sec. Max. 150 60~120 Sec. 100 50 50 0 100 150 200 250 Time (Seconds) Packaging Specifications 2.0 ± 0.5 (.079 ± .020) 330 (12.99) DIA. 30.4 (1.20) THICKNESS 0.10 (.004) MAX. 13.0 ± 0.5 (.512 ± .020) DIA. 21.0 ± 0.8 (.827 ± .031) EMBOSSED CAVITY 50.0 -0 (1.969 - .000) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 26 +0 (1.02 +.000) 12 (.472) END 4 (.157)     START  NO COMPONENT 350 (13.780) 24.0 (.945)  NO COMPONENT COMPONENTS USER DIRECTION OF FEED QTY: 800 PCS. PER REEL 400 (15.748) DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 11/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL