SDR0603-180ML

PL IA Features ■ Available in E12 series ■ Small design of only 5.8 mm maximum Applications ■ Input/output of DC/DC converters ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios *R oH S CO M NT diameter ■ Low 3.9 mm profile ■ RoHS compliant* SDR0603 Series - SMD Power Inductors Electrical Specifications Inductance 1kHz Bourns Part No. (µH) Tol. % Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) SDR0603-1R5ML SDR0603-2R5ML SDR0603-3R3ML SDR0603-3R9ML SDR0603-4R7ML SDR0603-5R0ML SDR0603-6R8ML SDR0603-7R5ML SDR0603-100ML SDR0603-120ML SDR0603-150ML SDR0603-180ML SDR0603-220ML SDR0603-270ML SDR0603-330KL SDR0603-390KL SDR0603-470KL SDR0603-560KL SDR0603-680KL SDR0603-820KL SDR0603-101KL SDR0603-121KL SDR0603-151KL SDR0603-181KL SDR0603-221KL SDR0603-271KL SDR0603-331KL SDR0603-391KL SDR0603-471KL 1.5 2.5 3.3 3.9 4.7 5.0 6.8 7.5 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 24 21 21 22 20 19 19 19 24 23 22 23 20 19 23 22 20 17 17 15 28 27 28 26 26 26 28 28 29 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 85 74 68 62 56 50 44 38 34 30 28 24 30 19 15 13 13 12 12 11 10 8 8 7 6 5 5 4 4 0.04 0.05 0.05 0.05 0.07 0.07 0.11 0.12 0.15 0.16 0.18 0.25 0.28 0.30 0.45 0.46 0.55 0.62 0.72 0.84 0.95 1.10 1.43 1.60 2.00 2.40 3.20 3.40 4.55 3.00 2.35 2.20 2.10 1.80 1.60 1.38 1.29 1.14 1.02 0.93 0.82 0.75 0.67 0.61 0.56 0.52 0.48 0.44 0.40 0.38 0.36 0.32 0.30 0.26 0.24 0.20 0.18 0.15 3.50 2.70 2.60 2.20 2.20 2.10 1.80 1.60 1.40 1.30 1.10 1.10 0.96 0.86 0.70 0.66 0.62 0.58 0.54 0.48 0.66 0.60 0.56 0.50 0.46 0.38 0.36 0.32 0.26 General Specifications Test Voltage........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core ...............................Ferrite DR core Wire ............................Enameled copper Terminal.....................................Ag/Ni/Sn Rated Current..Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging.....................400 pcs. per reel Product Dimensions 5.8 (.228) MAX. 3.9 MAX. (.154) 1.8 TYP. (.071) 5.8 MAX. (.228) Recommended Layout 5.8 (.228) 6.0 (.236) 1.7 (.067) Typical Part Marking START 101 FINISH *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. DIMENSIONS: MM (INCHES) SDR0603 Series - SMD Power Inductors Packaging Specifications 178.0 DIA. (7.00) 2.0 ± 0.5 (.079 ± .020) 18.4 (.724) THICKNESS 0.10 (.004) MAX. 50.0 (1.969) EMBOSSED CAVITY 21.0 ± 0.8 (.827 ± .031) 13.0 ± 0.5 (.512 ± .020) DIA. 13.0 ± 0.5 DIA. (.512 ± .020) 14.0 (.551) 4 (.157) EMBOSSED CARRIER END START 12 (.472) 4.1 (.161) 8 (.315) NO COMPONENT COMPONENTS NO COMPONENT 160 (6.299) 3200 (125.984) 400 (15.748) USER DIRECTION OF FEED QTY: 400 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.