SDR1005-4R7ML

T PL IA N M CO *R oH S Features Applications ■ Available in E6 series ■ Input/output of DC/DC converters ■ Low profile of only 5.0 mm ■ Power supplies for: ■ Inductance as low as 0.68 µH - Portable communications equipment - Camcorders - LCD TVs ■ RoHS compliant* SDR1005 Series - SMD Power Inductors Bourns Part Number (μH) Tol. % Q Ref. Test Frequency Q (MHz) SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) SDR1005-R68ML 0.68 ± 20 26 7.960 160 0.006 8.50 9.50 SDR1005-1R0ML 1 ± 20 55 2.600 137 0.007 7.50 9.00 SDR1005-1R5ML 1.5 ± 20 50 3.000 95 0.009 6.50 8.00 SDR1005-2R2ML 2.2 ± 20 51 2.470 65 0.012 6.10 7.00 SDR1005-2R5ML 2.5 ± 20 49 3.000 56 0.012 5.50 7.00 SDR1005-3R3ML 3.3 ± 20 45 2.520 54 0.015 5.00 6.40 SDR1005-4R7ML 4.7 ± 20 46 2.700 42 0.019 4.50 5.40 SDR1005-6R8ML 6.8 ± 20 56 2.000 31 0.030 3.40 4.50 SDR1005-100ML 10 ± 20 43 4.000 26 0.050 2.90 3.70 SDR1005-150ML 15 ± 20 42 2.700 22 0.060 2.50 3.00 SDR1005-220ML 22 ± 20 29 2.520 18 0.10 2.00 2.50 SDR1005-330KL 33 ± 10 29 2.200 14 0.12 1.80 2.00 SDR1005-470KL 47 ± 10 30 2.200 12 0.19 1.40 1.60 SDR1005-680KL 68 ± 10 24 2.200 11 0.24 1.20 1.40 SDR1005-101KL 100 ± 10 41 0.056 8 0.33 1.00 1.20 SDR1005-151KL 150 ± 10 58 0.087 6 0.59 0.80 1.00 SDR1005-221KL 220 ± 10 50 0.068 5 0.78 0.70 0.80 SDR1005-331KL 330 ± 10 56 0.070 4 1.15 0.55 0.60 SDR1005-471KL 470 ± 10 60 0.081 4 1.70 0.45 0.50 SDR1005-681KL 680 ± 10 72 0.096 3 2.60 0.35 0.40 SDR1005-102KL 1000 ± 10 78 0.122 2 3.90 0.30 0.35 SDR1005-152KL 1500 ± 10 97 0.131 2 6.30 0.25 0.30 SDR1005-222KL 2200 ± 10 85 0.128 2 8.20 0.20 0.24 SDR1005-332KL 3300 ± 10 106 0.128 1 14.00 0.16 0.18 SDR1005-472KL 4700 ± 10 96 0.125 1 17.00 0.15 0.16 SDR1005-682KL 6800 ± 10 105 0.171 1 30.00 0.11 0.12 SDR1005-822KL 8200 ± 10 102 0.145 1 34.00 0.11 0.12 SDR1005-103KL 10000 ± 10 102 0.138 1 39.00 0.10 0.11 Test Voltage .................... 0.1 V, 100 KHz .. 250 °C, 10 sec. max. (in compliance with JEDEC, J-STD-020C, Table 4-2) Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature .. -40 °C to +125 °C Resistance to Soldering Heat ........................ +250 °C, 10 sec. max. Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core ....................................... Ferrite DR Wire ............................Enameled copper Base ................................................DAP Terminal ........................................Cu/Sn Rated Current ...................Ind. drop 10 % typ. at Isat Temperature Rise ....................15 °C max. at rated I rms Packaging .................... 600 pcs. per reel Product Dimensions 101 Inductance 1 kHz 10.0 ± 0.2 (.393 ± .008) 12.7 ± 0.2 (.500 ± .008) 5.0 ± 0.3 MAX. (.197 ± .012) 7.6 ± 0.3 TYP. (.299 ± .012) 2.4 ± 0.2 (.094 ± .008) TYP. Electrical Schematic 1.95 ± 0.1 (.077 ± .003) TYP. 2.2 ± 0.2 (.087 ± .008) TYP. • = START OF WINDING Recommended Layout 2.8 (.110) 7.3 (.287) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 3.0 (.118) DIMENSIONS: MM (INCHES) SRF0504 SDR1005Series Series- -Line SMDFilter Power Inductors Temperature Rising Area Preheat Area +4.0 °C / sec. max. Reflow Area 150~200 °C / 60~120 sec. Forced Cooling Area +3.0 °C / sec. max. -(1.0~5.0) °C / sec. max. Peak Temp: 245 °C 250 Temperature (°C) 217 °C 60 ~ 150 sec. 200 60 sec. max. Peak Temperature: 245 °C max. Max. Peak Temperature: -5 °C, 30 sec. max. Max. Time Above 217 °C: 60 ~ 150 sec. max. 150 60 ~ 120 sec. 100 50 100 50 0 150 200 250 Time (Seconds) 2.0 ± 0.5 (.079 ± .020) 330 (12.99) DIA. 30.4 (1.20) THICKNESS 0.10 (.004) MAX. 13.0 ± 0.5 (.512 ± .020) DIA. 21.0 ± 0.8 (.827 ± .031) EMBOSSED CAVITY 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 26 (1.02) 0.4 ± 0.05 (.016 ± .002) 13.2 ± 0.1 (.520 ± .004) 1.55 ± 0.05 DIA. (.061 ± .002) END 11.5 ± 0.1 (.453 ± .004) 4.0 ± 0.1 (.157 ± 0.04) START 24.0 ± 0.3 (.945 ± .012) 1.5 MIN. (.059) 4.4 ± 0.1 (.173 ± .004) 5.3 ± 0.1 (.153 ± .004) 10.4 ± 0.1 (.409 ± .004) 16.0 ± 0.1 (.630 ± .004) NO COMPONENT COMPONENTS NO COMPONENT 200 (7.874) 11200 (440.945) 400 (15.748) DIMENSIONS: MM (INCHES) USER DIRECTION OF FEED REV. 03/18 QTY: 600 PCS. PER REEL Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL