SDR1006-2R5ML

T PL IA N M CO *R oH S Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Small design of only 9.8 mm maximum ■ Power supplies for: diameter ■ RoHS compliant* - Portable communications equipment Camcorders LCD TVs CD players SDR1006 Series - SMD Power Inductors Inductance 1 kHz Bourns Part Number (μH) Tol. % Q Ref. Test Frequency (MHz) SDR1006-1R5ML SDR1006-2R2ML SDR1006-3R3ML SDR1006-3R9ML SDR1006-4R7ML SDR1006-5R6ML SDR1006-6R8ML SDR1006-8R2ML SDR1006-100ML SDR1006-120ML SDR1006-150ML SDR1006-180ML SDR1006-220ML SDR1006-270KL SDR1006-330KL SDR1006-390KL SDR1006-470KL SDR1006-560KL SDR1006-680KL SDR1006-820KL SDR1006-101KL SDR1006-121KL SDR1006-151KL SDR1006-181KL SDR1006-221KL SDR1006-271KL SDR1006-331KL SDR1006-391KL SDR1006-471KL SDR1006-561KL SDR1006-681KL SDR1006-821KL SDR1006-102KL SDR1006-122KL SDR1006-152KL SDR1006-182KL SDR1006-222KL SDR1006-222KL SDR1006-272KL SDR1006-332KL SDR1006-392KL SDR1006-472KL 1.5 2.2 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2200 2700 3300 3900 4700 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 35 35 34 34 33 33 33 31 30 30 30 30 25 25 25 20 20 20 15 15 15 15 15 12 12 12 12 12 12 12 12 10 30 31 31 31 31 31 32 32 32 32 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 0.252 SRF Min. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 105 68 55 48 40 35 32 24 21 20 16 15 13 11 10 9.0 8.0 7.5 7.0 6.0 5.2 5.0 4.5 4.0 3.8 3.5 3.2 3.0 2.5 2.3 2.1 2.0 1.9 1.8 1.7 1.6 1.5 1.5 1.4 1.3 1.2 0.8 0.018 0.021 0.024 0.027 0.036 0.040 0.044 0.048 0.060 0.070 0.080 0.090 0.10 0.11 0.12 0.14 0.17 0.19 0.22 0.25 0.35 0.40 0.47 0.63 0.73 0.97 1.15 1.30 1.48 1.90 2.25 2.55 3.10 4.20 5.00 6.80 7.60 7.60 11.60 13.50 14.80 18.00 6.40 5.40 5.00 4.60 4.00 3.80 3.40 3.00 2.60 2.45 2.25 2.15 1.95 1.75 1.50 1.35 1.25 1.15 1.10 1.00 0.97 0.89 0.78 0.72 0.66 0.57 0.52 0.48 0.42 0.33 0.28 0.24 0.23 0.21 0.19 0.17 0.16 0.16 0.14 0.12 0.11 0.10 10.00 10.00 10.00 8.40 7.30 6.40 5.90 5.40 5.10 4.50 4.00 3.80 3.50 3.40 2.90 2.60 2.30 2.10 2.00 1.90 1.70 1.50 1.40 1.30 1.10 1.00 0.85 0.80 0.80 0.66 0.65 0.56 0.53 0.48 0.45 0.38 0.36 0.36 0.33 0.30 0.28 0.24 WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf Test Frequency ............................. 1 KHz Test Voltage .......................................1 V .. 230 °C, 50 sec. max. Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature .. -40 °C to +125 °C Resistance to Soldering Heat ............................... +260 °C for 5 sec. Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core ............................... Ferrite DR core Wire .................... Enameled copper wire Base ................................................DAP Terminal ....................................Ag/Ni/Sn Rated Current ...................Ind. drop 10 % typ. at Isat Temperature Rise .....................40 °C max. at rated Irms Packaging .................... 800 pcs. per reel Product Dimensions 9.8 MAX. (.386) 5.8 MAX. (.228) 2.9 TYP. (.114) 9.8 MAX. (.386) Recommended Layout 10.0 TYP. (.394) 2.8 (.110) TYP. 10.0 TYP. (.394) DIMENSIONS: MM (INCHES) Typical Part Marking 101 SRF0504 SDR1006Series Series- -Line SMDFilter Power Inductors Materials 2.0 ± 0.5 (.079 ± .020) 330 (12.992) DIA. Paper Plastics 30.4 (1.20) Electrical Schematic 13.0 ± 0.5 (.512 ± .020) DIA. 21 ± 0.8 (.827 ± .039) 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) 26 (1.024) DIMENSIONS: 24 (.945) MM (INCHES) 4 (.157) END START 12 (.472) NO COMPONENT COMPONENTS NO COMPONENT 200 (7.874) 12000 (472.441) 400 (15.748) 6.7 (.264) t= .35 (.014) USER DIRECTION OF FEED QTY: 800 PCS. PER REEL Strength Of Cover Tape 165° TO 180° TOP COVER TAPE BASE TAPE The force for tearing off cover tape is 10 to 130 grams in the arrow direction. Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 04/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL