SDR1806-100ML

IA NT Features ■ Available in E6 series ■ Low profile of only 6.6 mm ■ Inductance as low as 1 µH ■ RoHS compliant* Applications ■ Input/output of DC/DC converters ■ Power supplies for: oH S CO M PL • Portable communications equipment • Camcorders • LCD TVs • Car radios *R SDR1806 Series - SMD Power Inductors Electrical Specifications Inductance 100 kHz Bourns Part No. (µH) Tol. % Q Ref. Test Frequency (MHz) SRF Typ. (MHz) RDC (mΩ) I rms Max. (A) I sat Typ. (A) SDR1806-1R0ML SDR1806-2R2ML SDR1806-3R3ML SDR1806-5R6ML SDR1806-100ML SDR1806-150ML SDR1806-220ML SDR1806-330ML SDR1806-470ML SDR1806-680ML SDR1806-101KL SDR1806-151KL SDR1806-221KL SDR1806-331KL SDR1806-471KL SDR1806-681KL SDR1806-102KL 1 2.2 3.3 5.6 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 10 10 10 10 10 10 10 21 22 22 23 22 20 22 24 22 22 25 23 20 18 15 12 10 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.252 100.0 55.0 40.0 30.0 25.0 17.0 13.0 11.0 9.0 8.0 7.0 5.0 4.5 3.5 3.0 2.5 2.0 4.0 6.8 9.8 15.0 25.0 35.0 45.0 68.0 95.0 130.0 190.0 270.0 420.0 580.0 820.0 1200.0 1800.0 10.0 9.00 7.60 6.40 5.30 4.30 3.60 3.00 2.50 2.10 1.70 1.40 1.10 1.00 0.80 0.70 0.50 30.00 22.00 17.00 12.80 10.00 8.00 6.70 5.40 4.60 3.80 3.20 2.60 2.20 1.80 1.50 1.20 1.00 General Specifications Test Voltage.....................................0.1 V Reflow soldering.....250 °C; 10 sec max. (In compliance with JEDEC, J-STD-020C, Table 4-2) Operating Temperature ..-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ............................250 °C, 10 sec. max. Materials Core.........................................Ferrite DR Wire .............................Enameled copper Base ......................................LCP E4008 Terminal.....................................Cu/Ni/Sn Rated Current ....................Ind. drop 10 % typ. at Isat Temperature Rise ..................40 °C max. at rated Irms Packaging.....................250 pcs. per reel Product Dimensions Electrical Schematic 101 14.0 ± 0.3 (.551 ± .012) 18.3 ± 0.3 (.720 ± .012) 6.6 ± 0.3 (.260 ± .012) 13.0 ± 0.3 (.512 ± .012) 2.5 ± 0.2 (.098 ± .008) 2.6 ± 0.2 (.102 ± .008) • = START OF WINDING Recommended Layout REF. 12.7 (.500) 2.9 REF. (.114) DIMENSIONS: MM (INCHES) 3.0 REF. (.118) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SDR1806 Series - SMD Power Inductor Soldering Profile 300 Max. of 10 seconds at 250 °C Max. of 30 seconds > 220 °C 250 250 °C 200 Temperature (°C) 150 120 - 150 seconds 100 Ramp-down 5 °C/second maximum 50 Ramp-up 4 °/second maximum 0 0 50 100 150 Time (seconds) 200 250 300 Packaging Specifications 330 (12.99) DIA. 2.0 ± 0.5 (.079 ± .020) 38.4 (1.512) THICKNESS 0.10 (.004) MAX. EMBOSSED CAVITY 21.0 ± 0.8 (.827 ± .031) 13.0 ± 0.5 (.512 ± .020) DIA. 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 34 (1.339) 4.0 (.157) 32.0 (1.260) END START 32.0 (1.260) 101 101 101 101 20.0 (.787) DIMENSIONS: MM (INCHES) NO COMPONENT NO COMPONENT COMPONENTS 160 (6.299) 390 (15.354) USER DIRECTION OF FEED QTY: 250 PCS. PER REEL REV. 02/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.