SDR6603-101M

T PL IA N M CO *R oH S Features Applications ■ Height of 2.92 mm ■ Input/output of DC/DC converters ■ Current rating up to 2.9 amps ■ Power supplies for: • Portable communications equipment • Camcorders • LCD TVs ■ RoHS compliant* SDR6603 Series - SMD Power Inductors Bourns Part Number (μH) SDR6603-1R0M SDR6603-1R5M SDR6603-2R2M SDR6603-3R3M SDR6603-4R7M SDR6603-6R8M SDR6603-8R2M SDR6603-100M SDR6603-150M SDR6603-220M SDR6603-330M SDR6603-470M SDR6603-680M SDR6603-820M SDR6603-101M SDR6603-151M SDR6603-221M SDR6603-331M SDR6603-471M SDR6603-681M SDR6603-821M SDR6603-102M 1.0 1.5 2.2 3.3 4.7 6.8 8.2 10 15 22 33 47 68 82 100 150 220 330 470 680 820 1000 Tol. % ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 15 15 15 15 15 15 Q Ref. Test Frequency (MHz) SRF Typ. (MHz) RDC Max. (Ω) I rms Max. (A) I sat Typ. (A) 20 19 18 18.5 17 15.5 10 17 17 16 24 15 18 10 29 41 33 42 42 58 40 71 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.252 130 115 90 70 50 45 40 35 30 20 15 14 11 10 9 6 5.5 5 4 3 2.5 2 0.05 0.05 0.07 0.08 0.09 0.13 0.16 0.16 0.23 0.37 0.51 0.64 0.86 1.18 1.3 2.0 3.2 3.8 5.1 9.2 12.6 13.8 2.9 2.8 2.4 2.0 1.5 1.4 1.3 1.1 1.0 0.80 0.60 0.50 0.40 0.35 0.30 0.25 0.20 0.16 0.15 0.12 0.10 0.07 2.9 2.6 2.3 2.0 1.5 1.2 1.15 1.1 0.90 0.70 0.58 0.50 0.40 0.35 0.31 0.27 0.22 0.18 0.16 0.14 0.12 0.10 Test Voltage ................................... 0.1 V Reflow Soldering ... 230 °C, 50 sec. max Operating Temp. ........... -40 °C to +125 °C (Temperature rise included) Storage Temperature.. -40 °C to +125 °C Resistance to Soldering Heat ......................... 260 °C, 10 sec. max. Moisture Sensitivity Level ..................... 1 ..................N/A Materials Core ............................................. Ferrite Wire .......................... Enamelled copper Base ..........................................Ceramic Adhesive .............................. Epoxy resin Terminal ....................................Ag/Ni/Au Rated Current .................Ind. drop 10 % typ. at Isat Temp. Rise ...15 °C typical at rated Irms Packaging.................... 600 pcs. per reel Product Dimensions 6.60 MAX. (0.260) 100 Inductance 100 kHz 4.45 (0.175) MAX. Inductance vs. Current 103 102 7 5 3 2 MAX. 2.92 (0.115) 102 101 Inductance (μH) 7 5 3 2 101 100 7 5 TYP. 3.05 (0.120) TYP. 1.27 (0.050) 4.32 TYP. (0.170) Recommended Layout 3 2 REF. 100 7 5 101 1.60 REF. (0.063) 1R0 2 3 5 7 102 2 3 5 7 103 2 3 5 4.10 (0.161) 3.00 REF. (0.118) 7 104 DC Current (mA) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf REF. 7.00 (0.276) DIMENSIONS: MM (INCHES) SRF0504 SDR6603Series Series- -Line SMDFilter Power Inductors Electrical Schematic Soldering Profile 275 Maximum of 10 seconds between +255°C and +260°C 260°C peak 255°C 225 220°C Temperature (°C) 190°C Ramp Down 6°C/second maximum 60 - 90 seconds 175 150°C 125 120 - 150 seconds 10 seconds minimum 75 Ramp Up 3°C/second maximum 25 0 50 100 150 200 250 300 Time (seconds) 2.0 ± 0.5 (.079 ± .020) 178 (7.00) DIA. Rev. 02/22/05 16.5 (.650) THICKNESS 0.10 (.004) MAX. 13.0 (.512) DIA. 21.0 ± 0.8 (.827 ± .031) EMBOSSED CAVITY 50.0 - 0 (1.969 - 0) 13.0 DIA. (.512) EMBOSSED CARRIER 14 + 0 (.551 + 0) 8.0 (.315) END 100 4.0 (.157) 100 100 START 100 NO COMPONENT 200 (7.87) 100 100 NO COMPONENT COMPONENTS USER DIRECTION OF FEED QTY: 600 PCS. PER REEL 400 (15.75) DIMENSIONS: MM (INCHES) REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL