SF-0402FP125F-2

C O LO & MP LI GE AN N T FR EE SinglFuse™ SF-0402FPxxxF Series Features n Single blow fuse for overcurrent protection *R oH S n 1005 (EIA 0402) miniature footprint n Fast-acting precision fuse n UL 248-14 listed n RoHS compliant* and halogen free** n Thin film chip design n Surface mount packaging for automated assembly *R oH S C OM PL IA N T ** HA I SF-0402FPxxxF Series - Fast Acting Precision Surface Mount Fuses Electrical Characteristics SF-0402FP025F 0.25 SF-0402FP0375F 0.375 SF-0402FP050F Rated Voltage Interrupting Rating Typical I2t (A2s) **** 0.60 0.0017 0.33 0.0035 0.24 0.0036 0.50 0.16 0.0060 SF-0402FP075F 0.75 0.10 0.0120 SF-0402FP100F 1.00 0.073 0.024 SF-0402FP125F 1.25 SF-0402FP150F 1.50 SF-0402FP175F 1.75 SF-0402FP200F 2.00 SF-0402FP250F SF-0402FP300F Open within 5 sec. at 300 % rated current Ro VE LEA HS RS D C ION FRE OM S E PL AR IA E NT * 0.20 LE AD SF-0402FP020F Resistance (Ω) Typ.*** Fusing Time F RE E Rated Current (Amps) Model Open within 5 sec. at 200 % rated current 0.054 0.040 DC 35 V 0.034 DC 35 V 35 A 0.045 0.081 0.092 0.031 0.120 2.50 0.018 0.220 3.00 0.015 0.270 SF-0402FP350F 3.50 0.012 0.340 SF-0402FP400F 4.00 0.011 0.360 SF-0402FP500F 5.00 0.009 0.550 *** Resistance value measured with ≤10 % rated current at 25 °C ambient. **** Melting I2t calculated at 0.001 second pre-arcing time. Reliability Testing No. Test Requirement ≤1 A: DCR change ≤ ±10 % >1 A: DCR change ≤ ±20 % Test Condition 1 Bending 2 Solderability Minimum 95 % coverage One dip at 255 °C for 5 seconds 3 Thermal shock DCR change ≤ ±10 % No mechanical damage 100 cycles between -55 °C and +125 °C 4 Moisture resistance 5 Salt spray 6 Mechanical vibration 7 8 DCR change ≤ ±10 % No excessive corrosion 2 mm 10 cycles Test Reference Refer to STP document MIL-STD-202 Method 208 MIL-STD-202 Method 107 MIL-STD-202 Method 106 DCR change ≤ ±10 % No excessive corrosion 48 hour exposure, 5 % salt solution Mechanical shock DCR change ≤ ±10 % No mechanical damage 1500 G, 0.5 ms, half-sine shocks MIL-STD-202 Method 213 Life No electrical “opens” during testing Voltage drop change shall be less than ±10 % of initial value 75 % rated current for 2000 hours at ambient temperature between +20 °C and +30 °C Refer to STP document DCR change ≤ ±10 % No mechanical damage 0.4 inch D.A. or 30 G between 5-3000 Hz MI L-STD-202 Method 101 MIL-STD-202 Method 204 * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. “SinglFuse” is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SinglFuse™ SF-0402FPxxxF Series Applications n Portable memory n Cell phones n LED lighting n LCD monitors n Rechargeable battery packs n Power tools n Disk drives n Battery chargers n PDAs n Set-top boxes n Digital cameras n Industrial controllers n MP3 players n Battery Management Systems (BMS) SF-0402FPxxxF Series - Fast Acting Precision Surface Mount Fuses Environmental Characteristics Agency Recognition Operating Temperature.....................................................................................-55 °C to +90 °C Storage Conditions Temperature.................................................................................................+5 °C to +35 °C Humidity...........................................................................................................40 % to 75 % Shelf Life........................................................................... 2 years from manufacturing date Moisture Sensitivity Level......................................................................................................... 1 ESD Classification (HBM).............................................................................................. Class 6 Typical Part Marking How to Order Represents total content. Layout may vary. SF - 0402 FP 050 F - 2 UL File Number............................. E198545 http://www.ul.com/ Follow link to Online Certificates Directory, then enter UL File No. E198545, or click here Construction PCB CuNi/Sn SinglFuse™ Product Designator SMD Footprint 0402 = 1005 (EIA 0402) size Fuse Blow Type FP = Fast acting precision RATED CURRENT (A) = 0.200 = 1.00 = 0.250 = 1.25 = 0.375 = 1.50 = 0.500 = 1.75 = 0.750 = 2.00 Rated Current 020 ~ 500 (200 mA ~ 5.00 A) = 2.50 = 3.00 = 3.50 = 4.00 = 5.00 Structure Type F = Thin film Cu/Sn EPOXY 1.0 ± 0.10 (.039 ± .004) Packaging Quantity Packaging Type - 2 = Tape & Reel 0.51 ± 0.10 (.020 ± .004) Product Dimensions 1.0 ± 0.10 (.039 ± .004) 1.0 ± 0.10 (.039 ± .004) 0.30 ± 0.10 (.012 ± .004) 0.40 (.016) (.012 ± .004) 0.33 ± 0.10 0.51 ± 0.10 (.013 ± .004) (.020 ± .004) 0.30 ± 0.10 (.012 ± .004) 0.33 ± 0.10 0.70 (.027) 1.60 (.063) 0.70 (.027) 1.60 0.30 ± 0.10 (.063) (.012 ± .004) 0.30 ±0.30 0.10± 0.10 (.012(.012 ± .004) ± .004) 0.70 (.027) Recommended Pad Layout 0.40 0.51 ± 0.10 (.020 ± .004) 0.30 ± 0.10 (.012 ± .004) 20,000 pieces per 7-inch reel (.016) MM 0.30 ± 0.10DIMENSIONS: 0.30 ± 0.10 (INCHES) (.012 ± .004) 0.40 (.016) 1.60 (.063) 0.33 ± 0.10 (.013 ± .004) ± .004) Curve Current Rating Thermal(.013 Derating 140 0.30 ± 0.10 120 (.012 ± .004) DERATING (%) 0.30 ± 0.10 (.012 ± .004) 0.30 ± 0.10 (.012 ± .004) 0.30 ± 0.10 (.012 ± .004) 100 80 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 MAXIMUM OPERATING TEMPERATURE (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-0402FPxxxF Series - Fast Acting Precision Surface Mount Fuses Solder Reflow Recommendations Tp TEMPERATURE (°C) TL Tsmax Tc -5 °C tp MAX. RAMP UP RATE = 3 °C/s MAX. RAMP DOWN RATE = 6 °C/s tL PREHEAT AREA Tsmin ts 25 TIME 25 °C TO PEAK Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) 150 °C 200 °C 60~120 seconds Liquidous Temperature (TL) Time (tL) maintained above TL 217 °C 60~150 seconds Ramp Up Rate (TL to Tp) 3 °C / second max. Peak Package Body Temperature (Tp) 260 °C Time (tp)* within 5 °C of the specified classification temperature (Tc) 30 seconds* Time 25 °C to Peak Temperature 8 minutes max. Ramp Down Rate (Tp to TL) TIME Pb-Free Assembly 6 °C / second max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. 10 sec. max. 260 Average I2t vs. t Curves TEMPERATURE (°C) Average Pre-Arcing Time vs. Current Curves 150 1.501.50 A A 1.751.75 A A 2.002.00 A A 2.502.50 A A 3.003.00 A A 3.503.50 A A 4.004.00 A A 5.005.00 A A 1.251.25 A A 1.001.00 A A 0.750.75 A A 0.500.50 A A 0.375 0.375 A A 0.250.25 A A 0.200.20 A A PREHEATING 100100 1 1 10 10 TIME 120 seconds 5.005.00 A A 4.004.00 A A 3.503.50 A A 3.003.00 A A 2.502.50 A A 2.002.00 A A 1.75 1.75 A A 1.501.50 A A 1.251.25 A A 1.001.00 A A 0.750.75 A A 0.500.50 A A 0.375 0.375 A A 0.250.25 A A 0.200.20 A A 0.10.1 0.10.1 0.01 0.01 2 I2t (A s) 2 I2t (A s) PRE-ARCING TIME (SECONDS) PRE-ARCING TIME (SECONDS) 1 1 0.01 0.01 0.001 0.001 0.001 0.001 0.0001 0.0001 0.10.1 REV. D 06/18 1 1 CURRENT CURRENT (A)(A) 10 10 100100 0.0001 0.0001 0.0001 0.0001 0.001 0.001 0.01 0.01 0.10.1 1 1 TIME (SECONDS) TIME (SECONDS) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-0402FPxxxF SeriesSMD Tape Trimming and Reel Packaging Specifications 3312 - 2 mm Potentiometer Tape Dimensions SF-0402FPxxxF Series per EIA 481-2 W P0 P 1 P2 A0 B 0 8.00 ± 0.10 (.315 ± .004) 4.0 ± 0.10 (.157 ± .004) 2.0 + 0.05 (.079 + .002) 2.0 ± 0.05 (.079 ± .002) 0.61 ± 0.05 (.024 ± .002) 1.15 ± 0.05 (.045 ± .002) F E1 3.50 ± 0.05 (.138 ± .002) D0 1.75 ± 0.10 (.069 ± .004) 1.50 + 0.10 (.059 + .004) T 0.43 ± 0.03 (.017 ± .001) PACKAGING: Paper tape, 20,000 pcs. per reel 13.40 ± 0.50 (.539 ± .020) 0.8 0.6 0.4 0.2 2.20 ± 0.30 (.087 ± .012) 60.20 ± 0.50 (2.370 ± .020) DIA. 178.00 ± 1.00 (7.008 ± .039) DIA. 13.20 +0.3/-0.2 (.520 +.012/-.008) DIA. 1.40 ± 0.20 (.055 ± .008) 0.8 0.6 0.4 0.2 1.20 ± 0.20 (.047 ± .008) 10 PO T E1 DO PO COVER TAPE F W B0 P1 P2 DIRECTION OF UNREELING AO MM DIMENSIONS: (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18