SF-0603FP015F-2

CO LO & MP LI GE AN N T FR EE SinglFuse™ SF-0603FP-F Series Features ■ Single blow fuse for overcurrent protection *R oH S ■ 1608 (EIA 0603) miniature footprint ** HA ■ Fast-acting precision fuse ■ UL 248-14 compliant H ■ RoHS compliant* and halogen free** ■ Thin film chip design ■ Surface mount packaging for automated assembly SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses Clearing Time Characteristics for Series Additional Information Click these links for more information: Clearing Time at 25 °C % of Current Rating Min. Max. 100 % 4 hours — 200 % — 5 seconds 300 % — 0.2 seconds PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Electrical Characteristics Rated Current (A) Resistance (Ω) Typ.*** SF-0603FP015F-2 0.15 2.189 0.00061 SF-0603FP020F-2 0.20 1.294 0.00142 SF-0603FP025F-2 0.25 1.095 SF-0603FP0375F-2 0.375 0.478 SF-0603FP050F-2 0.50 0.184 SF-0603FP075F-2 0.75 0.111 SF-0603FP100F-2 1.00 0.0687 Model Rated Voltage 65 VDC Interrupting Rating 50 A @ 35 VAC 13 A @ 65 VDC 50 A @ 35 VDC Typical I2t (A2s) **** 0.00162 0.0041 0.0122 0.0213 0.0426 35 A @ 35 VAC 13 A @ 65 VDC 35 A @ 35 VDC SF-0603FP125F-2 1.25 0.0478 SF-0603FP150F-2 1.50 0.0368 SF-0603FP175F-2 1.75 0.0308 0.101 SF-0603FP200F-2 2.00 0.0259 0.141 SF-0603FP250F-2 2.50 0.0209 SF-0603FP300F-2 3.00 0.0175 SF-0603FP350F-2 3.50 0.0147 SF-0603FP400F-2 4.00 0.0124 0.636 SF-0603FP500F-2 5.00 0.0095 1.11 35 VDC 35 A @ 35 VAC 50 A @ 24 VAC 35 A @ 35 VDC 50 A @ 24 VDC 0.0525 0.0717 0.242 0.333 0.495 Certifications cUL: E198545 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ *** Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±25 %. **** Melting I2t calculated at 0.001 second pre-arcing time. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. “SinglFuse” is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SinglFuse™ SF-0603FP-F Series Applications ■ Portable memory ■ Cell phones ■ LED lighting ■ LCD monitors ■ Rechargeable battery packs ■ Power tools ■ Disk drives ■ Battery chargers ■ PDAs ■ Set-top boxes ■ Digital cameras ■ Industrial controllers ■ MP3 players ■ Battery Management Systems (BMS) SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses Average I2t vs. t Curves Average Pre-Arcing Time vs. Current Curves 1.25 A 1.00 A 0.75 A 0.50 A 0.375 A 0.25 A 0.20 A 0.15 A 1.50 A 1.75 A 2.00 A 2.50 A 3.00 A 3.50 A 4.00 A 5.00 A 5.00 A 4.00 A 3.50 A 3.00 A 2.50 A 2.00 A 1.75 A 1.50 A 1.25 A 1.00 A 0.75 A 0.50 A 0.375 A 0.25 A 0.20 A 0.15 A 100 1 10 0.1 I2t (A2s) PRE-ARCING TIME (SECONDS) 1 0.01 0.1 0.01 0.001 0.001 0.0001 0.1 1 10 CURRENT (A) 100 0.0001 0.0001 0.001 0.01 0.1 1 10 TIME (SECONDS) Environmental Characteristics Operating Temperature.................................................................................................................................................................. -55 °C to +90 °C Storage Conditions Temperature .............................................................................................................................................................................. +5 °C to +35 °C Humidity......................................................................................................................................................................................... 40 % to 75 % Shelf Life..........................................................................................................................................................2 years from manufacturing date Moisture Sensitivity Level ...................................................................................................................................................................................... 1 ESD Classification (HBM)............................................................................................................................................................................ Class 6 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses Typical Part Marking How to Order Packaging SF - 0603 FP 015 F - 2 Represents total content. Layout may vary. SinglFuse™ Product Designator SMD Footprint 1608 = (EIA 0603) size Fuse Blow Type FP = Fast acting precision RATED CURRENT (A) = 0.150 = 1.500 = 0.200 = 1.750 = 0.250 = 2.000 = 0.375 = 2.500 = 0.500 = 3.000 = 0.750 = 3.500 = 1.000 = 4.000 = 1.250 = 5.000 Rated Current 015 ~ 500 (150 mA ~ 5.0 A) Reel Dimension 7-inch Tape and Reel Specification EIA 481-2 Quantity 8,000 pieces Packaging Code -2 Recommended Pad Layout Structure Type F = Thin film 0.80 (.031) Packaging Type - 2 = Tape & Reel 1.00 (.039) Product Dimensions 1.6 ± 0.10 (.063 ± .004) 2.20 (.087) 0.36 ± 0.10 (.014 ± .004) 0.36 ± 0.10 (.014 ± .004) 0.36 ± 0.10 (.014 ± .004) DIMENSIONS: DIMENSIONS: 0.30 ± 0.10 (.012 ± .004) 0.81 ± 0.10 (.032 ± .004) MM (INCHES) 0.36 ± 0.10 (.014 ± .004) MM (INCHES) RATED CURRENT PERCENTAGE (%) Current Rating Thermal Derating Curve 140 120 100 80 60 40 20 0 -60 -40 -20 0 20 40 60 80 100 AMBIENT TEMPERATURE (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses Solder Reflow Recommendations Tp MAX. RAMP UP RATE = 3 °C/s MAX. RAMP DOWN RATE = 6 °C/s TEMPERATURE (°C) TL Tsmax tp tL PREHEAT AREA Tsmin ts 25 TIME 25 °C TO PEAK TIME Tc -5 °C Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) Pb-Free Assembly 150 °C 200 °C 60~120 seconds Ramp Up Rate (TL to Tp) 3 °C / second max. Liquidous Temperature (TL) Time (tL) maintained above TL 217 °C 60~150 seconds Peak Package Body Temperature (Tp) 260 °C Time (tp)* within 5 °C of the specified classification temperature (Tc) 30 seconds* Ramp Down Rate (Tp to TL) 6 °C / second max. Time 25 °C to Peak Temperature 8 minutes max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. Recommended Temperature Profile for Wave Soldering 10 sec. max. TEMPERATURE (°C) 260 Wave soldering is suitable for 0603 size models. 150 PREHEATING 120 seconds TIME Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-0603FP-F Series - Fast Acting Precision Surface Mount Fuses Reliability Testing No. Test Requirement ≤1 A: DCR change ≤ ±10 % >1 A: DCR change ≤ ±20 % Test Condition 2 mm Test Reference Refer to STP document 1 Bending 2 Solderability Minimum 95 % coverage One dip at 255 °C for 5 seconds MIL-STD-202 Method 208 3 Thermal shock DCR change ≤ ±10 % No mechanical damage 100 cycles between -55 °C and +125 °C MIL-STD-202 Method 107 4 Moisture resistance DCR change ≤ ±10 % No excessive corrosion 10 cycles MIL-STD-202 Method 106 5 Salt spray DCR change ≤ ±10 % No excessive corrosion 48 hour exposure, 5 % salt solution MIL-STD-202 Method 101 6 Mechanical vibration DCR change ≤ ±10 % No mechanical damage 0.4 inch D.A. or 30 G between 5-3000 Hz MIL-STD-202 Method 204 7 Mechanical shock DCR change ≤ ±10 % No mechanical damage 1500 G, 0.5 ms, half-sine shocks MIL-STD-202 Method 213 8 Life No electrical “opens” during testing Voltage drop change shall be less than ±10 % of initial value 75 % rated current for 2000 hours at ambient temperature between +20 °C and +30 °C Refer to STP document Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. D 03/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL