SF-1206HH20M-2

SinglFuse™ SF-1206HHxxM Series Features n Single blow fuse for overcurrent n Multilayer SMD design X protection n 3216 (EIA 1206) footprint n High current rating applications n High inrush withstand capability n UL 248-14 listed n RoHS compliant* and halogen free** n Surface mount packaging for automated assembly SF-1206HHxxM Series - High Current & High Inrush Multilayer Surface Mount Fuses Electrical Characteristics Model SF-1206HH10M-2 SF-1206HH12M-2 SF-1206HH15M-2 SF-1206HH20M-2 SF-1206HH25M-2 SF-1206HH30M-2 Rated Current (Amps) 10.0 12.0 15.0 20.0 25.0 30.0 Fusing Time Open within 5 sec. at 350 % rated current Resistance (Ω) Typ.*** 0.0045 0.0039 0.0031 0.0020 0.0016 0.0012 Rated Voltage Interrupting Rating DC 24 V 150 A DC 24 V DC 24 V 200 A DC 24 V 250 A DC 24 V 300 A Typical I2t (A2s) **** 12.1 19.2 34.3 64.6 189 273 *** Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±25 %. **** Melting I2t calculated at 1000 % of current rating. Reliability Testing No. Test Requirement Test Condition Test Reference MIL-STD-202 Method 208 1 Solderability Minimum 95 % coverage One dip at 245 °C for 5 seconds 2 Soldering heat resistance DCR change ≤ 10 % No mechanical damage One dip at 260 °C for 60 seconds 3 Moisture resistance 4 Salt spray 5 Mechanical vibration 6 Mechanical shock 7 Thermal Shock DCR change ≤ ±10 % No mechanical damage 100 cycles between -65 °C and +125 °C 8 Life No electrical “opens” during testing Voltage drop change shall be less than ±20 % of initial value 80 % rated current (75 % for < 1 A fuses) Refer to STP for 2000 hours at ambient temperature document between +20 °C and +30 °C DCR change ≤ ±15 % No excessive corrosion DCR change ≤ ±10 % No excessive corrosion DCR change ≤ ±10 % No mechanical damage DCR change ≤ ±10 % No mechanical damage 10 cycles 48 hour exposure, 5 % salt solution 0.4 inch D.A. or 30 G between 5-3000 Hz 1500 G, 0.5 ms, half-sine shocks MIL-STD-202 Method 210 MIL-STD-202 Method 106 MIL-STD-202 Method 101 MIL-STD-202 Method 204 MIL-STD-202 Method 213 MIL-STD-202 Method 107 Agency Recognition UL File Number..................................................... E198545 Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. “SinglFuse” is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SinglFuse™ SF-1206HHxxM Series Applications n Portable memory n Cellphones n LED lighting n LCD monitors n Rechargeable battery packs n Power tools n Disk drives n Battery chargers n PDAs n Set-top boxes n Digital cameras n Industrial controllers n MP3 players n Battery Management Systems (BMS) SF-1206HHxxM Series - High Current & High Inrush Multilayer Surface Mount Fuses Environmental Characteristics Operating Temperature................................................................................................................................................................. -55 °C to +125 °C Storage Conditions Temperature............................................................................................................................................................................... +5 °C to +35 °C Humidity.........................................................................................................................................................................................40 % to 75 % Shelf Life..........................................................................................................................................................2 years from manufacturing date Moisture Sensitivity Level....................................................................................................................................................................................... 1 ESD Classification (HBM)............................................................................................................................................................................ Class 6 Typical Part Marking How to Order Represents total content. Layout may vary. Construction SF - 1206 HH 10 M - 2 MASKING LAYER MARKING SinglFuse™ Product Designator FUSE ELEMENT CERAMIC BODY TERMINATION SMD Footprint 1206 = 3216 (EIA 1206) size Q Fuse Blow Type HH = High Current & High Inrush RATED CURRENT (A) Q = 10.0 X = 12.0 Y = 15.0 Z = 20.0 S = 25.0 V = 30.0 MARKING Rated Current 10 ~ 30 (10.0 A ~ 30.0 A) MASKING LAYER Structure Type M = Multilayer Packaging Quantity Packaging Type - 2 = Tape & Reel Product Dimensions 3,000 pieces per 7-inch reel Recommended Pad Layout 3.20 ± 0.20 (.126 ± .008) 1.50 (.059) 1.60 ± 0.20 (.063 ± .008) 1.80 (.071) 1.60 ± 0.20 (.063 ± .008) 0.97 ± 0.20 (.038 ± .008) DIMENSIONS: 0.51 ± 0.25 (.020 ± .010) MM (INCHES) 4.40 (.173) DERATING (%) Current Rating Thermal Derating Curve 105 100 95 90 85 80 75 70 65 60 55 50 -55 -35 -15 5 25 45 65 85 105 125 MAXIMUM OPERATING TEMPERATURE (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HHxxM Series - High Current & High Inrush Multilayer Surface Mount Fuses Solder Reflow Recommendations Tp MAX. RAMP UP RATE = 3 °C/s MAX. RAMP DOWN RATE = 6 °C/s TP T TEMPERATURE (°C) L TEMPERATURE (°C) TL Tsmax PREHEAT AREAUP RATE = 3 °C/s MAX. RAMP MAX. RAMP DOWN RATE = 6 °C/s Tsmin Tsmax tp tL tp tL PREHEAT AREA ts Tsmin TIME 25 °C TO PEAK TIME 25 TC -5 °C Ramp Up Rate (TL to Tp) Liquidous Temperature (TL) Time (tL) maintained above TL Peak Package Body Temperature (Tp) Ts 25 Tc -5 °C Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) TIME 25 °C TO PEAK TIME Pb-Free Assembly 150 °C 200 °C 60~120 seconds 3 °C / second max. 217 °C 60~150 seconds 260 °C Time (tp)* within 5 °C of the specified classification temperature (Tc) 30 seconds* Time 25 °C to Peak Temperature 8 minutes max. Ramp Down Rate (Tp to TL) 6 °C / second max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. 10 sec. max. TEMPERATURE (°C) 260 Recommended Temperature Profile for Wave Soldering 10 sec. max. TEMPERATURE (°C) 260 Wave soldering is suitable for 1206 size models. 150 PREHEATING 150 PREHEATING 120 seconds 120 seconds TIME TIME Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HHxxM - High CurrentTrimming & High Inrush Multilayer Surface Mount Fuses 3312 - Series 2 mm SMD Potentiometer Average I2t vs. t Curves Average Pre-Arcing Time vs. Current Curves 15.0 15.0 A A 12.0 12.0 A A 10.0 10.0 A A 20.0 A20.0 A 25.0 A25.0 A 30.0 A30.0 A 100000 100000 100 100 30.0 A 30.0 A 25.0 A 25.0 A 20.0 A 20.0 A 15.0 A 15.0 A 12.0 A 12.0 A 10.0 A 10.0 A 10 10 1 1 I2t (A2s) I2t (A2s) PRE-ARCING TIME (SECONDS) PRE-ARCING TIME (SECONDS) 10000 10000 10001000 0.1 0.1 0.010.01 100 100 0.001 0.001 0.0001 0.0001 10 10 100 100 CURRENT (A) (A) CURRENT 10001000 10 10 0.0010.001 0.01 0.01 0.1 0.1 1 1 10 10 TIMETIME (SECONDS) (SECONDS) REV. C 09/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HHxxM andTrimming Reel Packaging Specifications 3312 - 2Series mm Tape SMD Potentiometer Tape Dimensions SF-1206HHxxM Series per EIA 481-2 8.00 ± 0.10 (.315 ± .004) W P0 P 1 P2 A0 B 0 4.0 ± 0.10 (.157 ± .004) 4.0 ± 0.10 (.157 ± .004) 2.0 ± 0.05 (.079 ± .002) 1.80 ± 0.10 (.071 ± .004) 3.50 ± 0.10 (.138 ± .004) 3.50 ± 0.05 (.138 ± .002) F E1 1.75 ± 0.10 (.069 ± .004) 1.50 + 0.10 (.059 + .004) D0 K0 1.10 + 0.10 (.043 + .004) 0.23 ± 0.02 (.009 ± .001) T PACKAGING: Plastic tape, 3,000 pcs. per reel 0.8 0.6 0.4 0.2 13.40 ± 0.50 (.539 ± .020) 178.00 ± 1.00 (7.008 ± .039) DIA. 2.20 ± 0.30 (.087 ± .012) 13.20 +0.3/-0.2 (.520 +.012/-.008) DIA. 0.8 0.6 0.4 0.2 1.20 ± 0.20 (.047 ± .008) E1 60.20 ± 0.50 (2.370 ± .020) DIA. D0 1.40 ± 0.20 (.055 ± .008) P0 P2 T W F B0 D1 P1 AO KO DIMENSIONS: MM (INCHES) DIRECTION OF UNREELING Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R