SF-1206HIA450M-2

** Ro HS ** *H C AL & OM PL OG IA EN NT FR EE Features n High-inrush current withstand capability n EIA 1206 (3216 metric) footprint n AEC-Q200 compliant* n UL 248-14 listed n RoHS compliant** and halogen free*** SF-1206HIA-M Series - Automotive Grade High-Inrush SMD Fuses Clearing Time Characteristics for Series Additional Information Clearing Time @ 25 °C % of Current Rating Min. 100 % 200 % (1 - 6 A) 350 % (0.5 - 0.75 A) 4 hours 1 second — Click these links for more information: Max. — 60 seconds 5 seconds PRODUCT TECHNICAL LIBRARY INVENTORY SAMPLES Electrical Characteristics Rated Voltage Interrupting Rating 65 VDC 50 A @ 65 VDC 63 VDC 50 A @ 63 VDC Typical I2t (A2s) ****** Model Rated Current (A) Resistance (Ω) Typ.***** SF-1206HIA050M-2 0.5 0.98 SF-1206HIA075M-2 0.75 0.42 SF-1206HIA100M-2 1.0 0.37 SF-1206HIA150M-2 1.5 0.165 SF-1206HIA200M-2 2.0 0.089 0.82 SF-1206HIA300M-2 3.0 0.039 1.36 SF-1206HIA350M-2 3.5 0.03 SF-1206HIA400M-2 4.0 0.025 SF-1206HIA450M-2 4.5 0.023 SF-1206HIA600M-2 6.0 0.013 Certifications cUL: E198545 0.035 3 3 3 3 3 3 3 3 3 3 0.1 0.112 32 VDC 0.336 1.89 50 A @ 32 VDC 2.78 3.25 24 VDC 80 A @ 24 VDC 12.8 ***** Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ± 25 %. ****** Melting I2t calculated at 1000 % of current rating. Environmental Characteristics Storage Conditions   Temperature   Humidity Moisture Sensitivity Level ESD Classification1 1 -55 °C to + 150 °C 140 +5 °C to +35 °C 40 % to 75 % 1 Class 6 100 120 DERATING (%) Operating Temperature Current Rating Thermal Derating Curve per AEC-Q200-2, HBM 80 60 40 25 °C 20 0 -60 -40 -20 0 20 40 60 80 100 120 140 160 AMBIENT TEMPERATURE (°C) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * Meets Bourns’ internal AEC-Q200 equivalent test plan. ** RoHS Directive 2015/863, Mar 31, 2015 and Annex. *** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. “SinglFuse” is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HIA-M Series – Automotive Grade High-Inrush SMD Fuses Typical Part Marking How to Order Represents total content. Layout may vary. Markings in green color. C Rated Current Part Marking 0.5 A 0.75 A SF - 1206 HI A 050 M - 2 SinglFuse™ Product Designator SMD Footprint 1206 = EIA 1206 (3216 metric) Packaging Reel Dimension 7-inch Tape and Reel Specification EIA 481-2 Quantity 3,000 pieces Packaging Code -2 Fuse Blow Type HI = High Inrush Current Withstand Rated Current Part Marking C 3A K D 3.5 A L 1A E 4A M 1.5 A G 4.5 A T 2A I 6A O Automotive Grade Rated Current 050 ~ 600 = 0.5 A ~ 6 A Structure Type M = Ceramic Multilayer Packaging Type - 2 = Tape & Reel Product Dimensions Recommended Pad Layout 3.2 ± 0.2 (.126 ± .008) C 0.51 ± 0.25 (.020 ± .010) DIMENSIONS: MM (INCHES) 1.5 (.059) 1.6 ± 0.2 (.063 ± .008) 1.8 (.071) 0.97 ± 0.20 (.038 ± .008) 1.45 (.057) 1.6 ± 0.2 (.063 ± .008) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HIA-M Series – Automotive Grade High-Inrush SMD Fuses Average Pre-Arcing Time vs. Current Curves (0.5 - 3 A) 1.5 A 2A 3A 4A 3.5 A 100 100 10 10 PRE-ARCING TIME (SECONDS) PRE-ARCING TIME (SECONDS) 1A 0.75 A 0.5 A Average Pre-Arcing Time vs. Current Curves (3.5 - 6 A) 1 0.1 0.01 4.5 A 6A 1 0.1 0.01 0.001 0.001 1 10 100 1 10 CURRENT (A) 100 CURRENT (A) Average I2t vs. t Curves (0.5 - 3 A) Average I2t vs. t Curves (3.5 - 6 A) 1000 10000 3A 2A 1.5 A 100 1000 1A 0.75 A 0.5 A 6A 4.5 A 4A 3.5 A I2t (A2s) I2t (A2s) 10 1 100 10 0.1 0.01 0.001 0.01 0.1 TIME (SECONDS) 1 10 1 0.001 0.01 0.1 1 10 TIME (SECONDS) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-1206HIA-M Series – Automotive Grade High-Inrush SMD Fuses Solder Reflow Recommendations Tp Tp TL TEMPERATURE TEMPERATURE (°C)(°C) TL MAX. RAMP UP RATE = 3 °C/s MAX. RAMP DOWN RATE = 6 °C/s MAX. RAMP UP RATE = 3 °C/s MAX. RAMP DOWN RATE = 6 °C/s Tsmax PREHEAT AREA Tsmax tp tp tL tL PREHEAT AREA Tsmin Tsmin ts 25 TIME 25 °C TO PEAK TIME TIME 25 °C TO PEAK TIME Solder Wave Recommendations 10 sec. max. 260 10 sec. max. TEMPERATURE TEMPERATURE (°C) (°C) 260 150 PREHEATING PREHEATING 120 seconds 120 seconds TIME TIME 260 °C 30 seconds* Time 25 °C to Peak Temperature 8 minutes max. Ramp Down Rate (Tp to TL) 6 °C / second max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. Reliability Tests Test Items Visual Inspection Reference Standard MIL-STD-883 Method 2009 High Temperature Storage MIL-STD-202 Method 108 IEC 60068-2-1 JESD22 Method JA-104 MIL-STD-202 Method 103 MIL-STD-202 Method 108 JESD22 Method JB-100 MIL-STD-202 Method 204 MIL-STD-202 Method 213 MIL-STD-202 Method 210 MIL-STD-202 Method 101 MIL-STD-202 Method 208 AEC-Q200-006 AEC-Q200-005 MIL-STD-202 Method 211 Bourns Specification Biased Humidity High Temperature Operating Life Physical Dimension Mechanical Shock Resistance to Soldering Heat 01/20 3 °C / second max. 217 °C 60~150 seconds Time (tp)* within 5 °C of the specified classification temperature (Tc) Mechanical Vibration Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com 150 °C 200 °C 60~120 seconds Ramp Up Rate (TL to Tp) Low Temperature Storage Temperature Cycling 150 Pb-Free Assembly Liquidous Temperature (TL) Time (tL) maintained above TL Peak Package Body Temperature (Tp) ts 25 Profile Feature Preheat / Soak: Tc -5 °C Temperature Min. (Tsmin) Tc -5 °C Temperature Max. (T smax) Time (ts) from (Tsmin to Tsmax) Salt Spray Solderability Terminal Strength Board Flex Pull Test Electrical Characterization Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL