SF-1206HV30M-2

SinglFuse™ SF-1206HVxxM Series Features n Single blow fuse for overcurrent n Multilayer SMD design V protection n 3216 (EIA 1206) footprint n High voltage rating applications n High current rating applications n UL 248-14 listed n RoHS compliant* and halogen free** n Surface mount packaging for automated assembly SF-1206HVxxM Series - High Voltage & High Current Multilayer Surface Mount Fuses Electrical Characteristics Model SF-1206HV10M-2 SF-1206HV12M-2 SF-1206HV15M-2 SF-1206HV20M-2 SF-1206HV25M-2 SF-1206HV30M-2 SF-1206HV40M-2 Rated Current (Amps) 10.0 12.0 15.0 20.0 25.0 30.0 40.0 Fusing Time Open within 5 sec. at 350 % rated current Resistance (Ω) Typ.*** 0.0055 0.0045 0.0032 0.0023 0.0016 0.0012 0.0009 Rated Voltage Interrupting Rating DC 35 V 150 A DC 35 V DC 35 V 200A DC 35 V 200 A DC 26 V 300 A Typical I2t (A2s) **** 15.0 20.0 35.0 80.0 120.0 180.0 240.0 *** Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±25 %. **** Melting I2t calculated at 1000 % of current rating. Reliability Testing No. Test Requirement Test Condition Test Reference MIL-STD-202 Method 208 1 Solderability Minimum 95 % coverage One dip at 245 °C for 5 seconds 2 Soldering heat resistance DCR change ≤ 10 % No mechanical damage One dip at 260 °C for 60 seconds 3 Moisture resistance 4 Salt spray 5 Mechanical vibration 6 Mechanical shock 7 Thermal Shock DCR change ≤ ±10 % No mechanical damage 100 cycles between -65 °C and +125 °C 8 Life No electrical “opens” during testing Voltage drop change shall be less than ±20 % of initial value 80 % rated current (75 % for < 1 A fuses) Refer to STP for 2000 hours at ambient temperature document between +20 °C and +30 °C DCR change ≤ ±15 % No excessive corrosion DCR change ≤ ±10 % No excessive corrosion DCR change ≤ ±10 % No mechanical damage DCR change ≤ ±10 % No mechanical damage 10 cycles 48 hour exposure, 5 % salt solution 0.4 inch D.A. or 30 G between 5-3000 Hz 1500 G, 0.5 ms, half-sine shocks MIL-STD-202 Method 210 MIL-STD-202 Method 106 MIL-STD-202 Method 101 MIL-STD-202 Method 204 MIL-STD-202 Method 213 MIL-STD-202 Method 107 Agency Recognition UL File Number................................................................. E198545 WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. “SinglFuse” is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SinglFuse™ SF-1206HVxxM Series Applications n Portable memory n Cell phones n LED lighting n LCD monitors n Rechargeable battery packs n Power tools n Disk drives n Battery chargers n PDAs n Set-top boxes n Digital cameras n Industrial controllers n MP3 players n Battery Management Systems (BMS) SF-1206HVxxM Series - High Voltage & High Current Multilayer Surface Mount Fuses Environmental Characteristics Operating Temperature................................................................................................................................................................. -55 °C to +125 °C Storage Conditions Temperature............................................................................................................................................................................... +5 °C to +35 °C Humidity.........................................................................................................................................................................................40 % to 75 % Shelf Life..........................................................................................................................................................2 years from manufacturing date Moisture Sensitivity Level....................................................................................................................................................................................... 1 ESD Classification (HBM)............................................................................................................................................................................ Class 6 Typical Part Marking How to Order Represents total content. Layout may vary. Construction SF - 1206 HV 10 M - 2 MASKING LAYER MARKING SinglFuse™ Product Designator FUSE ELEMENT CERAMIC BODY TERMINATION SMD Footprint 1206 = 3216 (EIA 1206) size Q Fuse Blow Type HV = High Voltage & High Current RATED CURRENT (A) Q = 10.0 S = 25.0 X = 12.0 V = 30.0 Y = 15.0 O = 40.0 Z = 20.0 MARKING Rated Current 10 ~ 40 (10.0 A ~ 40.0 A) MASKING LAYER Structure Type M = Multilayer Packaging Quantity Packaging Type - 2 = Tape & Reel 3,000 pieces per 7-inch reel Product Dimensions Recommended Pad Layout 3.20 ± 0.20 (.126 ± .008) DIMENSIONS: MM (INCHES) 1.50 (.059) 1.60 ± 0.20 (.063 ± .008) 1.80 (.071) 1.60 ± 0.20 (.063 ± .008) 0.51 ± 0.25 (.020 ± .010) H1 (10-25 A): H1 & H2 0.97 ± 0.20 (.038 ± .008) H2 (30-40 A): 4.40 (.173) 1.30 ± 0.20 (.051 ± .008) DERATING (%) Current Rating Thermal Derating Curve 105 100 95 90 85 80 75 70 65 60 55 50 -55 -35 -15 5 25 45 65 85 105 125 MAXIMUM OPERATING TEMPERATURE (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HVxxM Series - High Voltage & High Current Multilayer Surface Mount Fuses Solder Reflow Recommendations Tp MAX. RAMP UP RATE = 3 °C/s MAX. RAMP DOWN RATE = 6 °C/s TP T TEMPERATURE (°C) L TEMPERATURE (°C) TL Tsmax PREHEAT AREAUP RATE = 3 °C/s MAX. RAMP MAX. RAMP DOWN RATE = 6 °C/s Tsmin Tsmax tp tL tp tL PREHEAT AREA ts Tsmin TIME 25 °C TO PEAK TIME 25 TC -5 °C Ramp Up Rate (TL to Tp) Liquidous Temperature (TL) Time (tL) maintained above TL Peak Package Body Temperature (Tp) Ts 25 Tc -5 °C Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) TIME 25 °C TO PEAK TIME Pb-Free Assembly 150 °C 200 °C 60~120 seconds 3 °C / second max. 217 °C 60~150 seconds 260 °C Time (tp)* within 5 °C of the specified classification temperature (Tc) 30 seconds* Time 25 °C to Peak Temperature 8 minutes max. Ramp Down Rate (Tp to TL) 6 °C / second max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. 10 sec. max. TEMPERATURE (°C) 260 Recommended Temperature Profile for Wave Soldering 10 sec. max. TEMPERATURE (°C) 260 Wave soldering is suitable for 1206 size models. 150 PREHEATING 150 PREHEATING 120 seconds 120 seconds TIME TIME Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HVxxM - High Voltage & High Current Multilayer Surface Mount Fuses 3312 - 2Series mm SMD Trimming Potentiometer Average I2t vs. t Curves Average Pre-Arcing Time vs. Current Curves 20.0 20.0 A A 15.0 15.0 A A 12.0 12.0 A A 10.0 10.0 A A 25.0 A 25.0 A 30.0 A30.0 A 40.0 A40.0 A 100000 100000 100 100 40.0 A 40.0 A 30.0 A 30.0 A 25.0 A 25.0 A 20.0 A 20.0 A 15.0 A 15.0 A 12.0 A 12.0 A 10.0 A 10.0 A 10 10 1 1 I2t (A2s) I2t (A2s) PRE-ARCING TIME (SECONDS) PRE-ARCING TIME (SECONDS) 10000 10000 10001000 0.1 0.1 100 100 0.010.01 0.001 0.001 10 10 100 100 CURRENT (A) (A) CURRENT 10001000 10 10 0.0010.001 0.01 0.01 0.1 0.1 1 1 10 10 TIMETIME (SECONDS) (SECONDS) REV. B 01/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  SF-1206HVxxM andTrimming Reel Packaging Specifications 3312 - 2Series mmTape SMD Potentiometer SF-1206HVxxM Series per EIA 481-2 Tape Dimensions W 8.00 ± 0.10 (.315 ± .004) P0 4.00 ± 0.10 (.157 ± .004) P1 4.00 ± 0.10 (.157 ± .004) P2 2.00 ± 0.05 (.079 ± .002) A0 1.80 ± 0.20 (.071 ± .008) B0 3.50 ± 0.20 (.138 ± .008) F 3.50 ± 0.05 (.138 ± .002) E1 1.75 ± 0.10 (.069 ± .004) D0 1.50 + 0.10 (.059 + .004) K0 (SF-1206HV10M ~ SF-1206HV25M) 1.27 ± 0.20 (.050 ± .008) K0 (SF-1206HV30M ~ SF-1206HV40M) 1.40 ± 0.20 (.055 ± .008) T 0.23 ± 0.02 (.009 ± .001) PACKAGING: Plastic tape, 3,000 pcs. per reel 0.8 0.6 0.4 0.2 13.40 ± 0.50 (.539 ± .020) 178.00 ± 1.00 (7.008 ± .039) DIA. 2.20 ± 0.30 (.087 ± .012) 13.20 +0.3/-0.2 (.520 +.012/-.008) DIA. 0.8 0.6 0.4 0.2 1.20 ± 0.20 (.047 ± .008) E1 60.20 ± 0.50 (2.370 ± .020) DIA. D0 1.40 ± 0.20 (.055 ± .008) P0 P2 T W F B0 D1 P1 AO KO DIMENSIONS: MM (INCHES) DIRECTION OF UNREELING Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and (32
?+( 3$2
".++$"3(5$+8
:.41-2; Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change 6(3'.43
-.3("$

2$12
2'.4+#
"'$"*
%.1
-#
.!3 (-
3'$
+ 3$23
1$+$5 -3
(-%.1, 3(.-
-#
5$1(%8
3' 3
24"'
(-%.1, 3(.-
(2
"411$-3
and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns®
/1.#4"3
(-

42$1
//+(" 3(.-
, 8
5 18
%1.,
3'$
# 3
2'$$3
"' 1 "3$1(23("2
-#
/ 1 ,$3$12
#4$
3.
(
3'$
".,!(- 3(.-
.%
3'$
.41-2® product with other components (-
3'$
42$1$1$-3
//+(" 3(.-2
-#
"34 +
/$1%.1, -"$
, 8
5 18
.5$1
3(,$

2$12
2'.4+#
+6 82
5$1(%8
the actual performance of the Bourns®
/1.#4"3
(-
3'$(1
2/$"(="
#$5("$2
-#
//+(" 3(.-2
-#
, *$
3'$(1
.6-
(-#$/$-#$-3
)4#&,$-32
1$& 1#(-&
3'$
,.4-3
.%
##(3(.- +
3$23
, 1&(-
3.
#$2(&-
(-3.
3'$(1
#$5("$
.1
//+(" 3(.-
3.
".,/$-2 3$
%.1
#(>$1$-"$2
!$36$$-
+ !.1 3.18
-#
1$ +
6.1+#
".-#(3(.-2 -+$22
.41-2
' 2
$7/+("(3+8
#$2(&- 3$#
-
(-#(5(#4 +
.41-2® product as meeting the requirements of a particular industry 23 -# 1#
$&


.1

/ 13("4+ 1
04 +(=" 3(.-
$&

+(23$#
.1
1$".&-(9$#
.41-2
(2
-.3
1$2/.-2(!+$
%.1
-8
% (+41$
.%
-
(-#(5(#4 +
.41-2®
/1.#4"3
3.
,$$3
3'$
1$04(1$,$-32
.%
24"'
(-#42318
23 -# 1#
.1
/ 13("4+ 1
04 +(=" 3(.-

2$12
of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to 3'$(1
#$5("$2
.1
//+(" 3(.-2 Bourns®
/1.#4"32
1$
-.3
1$".,,$-#$#
43'.1(9$#
.1
(-3$-#$#
%.1
42$
(-
-4"+$ 1
+(%$2 5(-&
+(%$"1(3(" +
.1
+(%$2423 (-(-&
//+(" 3(.-2
-.1
(-
-8
.3'$1
//+(" 3(.-2
6'$1$
% (+41$
.1
, +%4-"3(.-
, 8
1$24+3
(-
/$12.- +
(-)418
#$ 3'
.1
2$5$1$
/1./$138
.1
$-5(1.-,$-3 +
# , &$

-+$22
$7/1$22+8
-#
2/$"(=" ++8
//1.5$#
(-
61(3(-&
!8
36.
43'.1(9$#
.41-2
1$/1$2$-3 3(5$2
on a case-by-case basis, use of any Bourns®
/1.#4"32
(-
24"'
4- 43'.1(9$#
//+(" 3(.-2
,(&'3
-.3
!$
2 %$
-#
3'42
(2
3
3'$
42$1