SF-1206SA200M-2

CO LO & MP LI GE AN N T FR EE Features ** HA *R oH S ■ ■ ■ ■ ■ Slow blow fusing speed EIA 1206 (3216 metric) footprint AEC-Q200 compliant*** UL 248-14 compliant RoHS* compliant and halogen free** SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses Clearing Time Characteristics for Series Additional Information Click these links for more information: Clearing Time at 25 °C % of Current Rating Min. Max. 100 % 4 hours — 250 % — 5 seconds PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Electrical Characteristics Model Rated Current (A) Resistance (Ω) Typ.**** Rated Voltage Interrupting Rating Typical I2t (A2s)***** SF-1206SA050M-2 0.50 1.080 0.006 SF-1206SA075M-2 0.75 0.514 0.016 SF-1206SA100M-2 1.00 0.420 0.048 SF-1206SA150M-2 1.50 0.210 0.121 SF-1206SA200M-2 2.00 0.140 SF-1206SA250M-2 2.50 0.071 SF-1206SA300M-2 3.00 0.051 0.606 SF-1206SA350M-2 3.50 0.039 0.758 SF-1206SA400M-2 4.00 0.032 0.909 SF-1206SA450M-2 4.50 0.027 1.131 SF-1206SA500M-2 5.00 0.023 1.515 0.333 65 VDC 50 A @ 65 VDC 0.485 Certifications cUL: E198545 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ *****Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±25 %. *****Melting I2t calculated at 0.001 second pre-arcing time. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. ***Meets Bourns internal AEC-Q200 test plan. “SinglFuse” is a trademark of Bourns, Inc. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses Average I2t vs. t Curves Average Pre-Arcing Time vs. Current Curves 2.5 A 2A 1.5 A 1A 0.75 A 3A 3.5 A 4A 4.5 A 0.5 A 5A 10000 10 5A 4.5 A 1000 4A 3.5 A 3A 2.5 A 2A 1.5 A 1A 0.75 A 0.5 A 100 0.1 I2t (A2s) PRE-ARCING TIME (SECONDS) 1 10 1 0.01 0.1 0.001 0.01 0.0001 1 10 100 CURRENT (A) 1000 0.001 0.0001 0.001 0.01 0.1 1 10 TIME (SECONDS) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses Current Rating Thermal Derating Curve Operating Temperature RATED CURRENT PERCENTAGE (%) Environmental Characteristics -55 °C to +150 °C Storage Conditions 1 Temperature +5 °C to +35 °C Humidity 40 % to 75 % Moisture Sensitivity Level 1 ESD Classification1 Class 6 per AEC-Q200-2, HBM 130 120 110 100 90 80 70 60 -55 -35 -15 5 25 45 65 85 105 125 145 165 AMBIENT TEMPERATURE (°C) Typical Part Marking How to Order Packaging SF - 1206 S A 050 M - 2 Represents total content. Layout may vary. Markings in cyan color. SinglFuse™ Product Designator SMD Footprint 1206 = EIA 1206 (3216 metric) C Fuse Blow Type S = Slow Blow Rated Current Part Marking Rated Current Part Marking Rated Current 050 ~ 500 = 0.5 A ~ 5 A 0.5 A C 3A K Structure Type M = Ceramic Multilayer 0.75 A D 3.5 A L M 1A E 4A G 4.5 A T 2A I 5A N 2.5 A J 7-inch Tape and Reel Specification EIA 481-2 Quantity 3,000 pieces Packaging Code -2 Recommended Pad Layout Automotive Grade 1.5 A Reel Dimension 1.5 (.059) 1.8 (.071) Packaging Type - 2 = Tape & Reel 1.45 (.057) DIMENSIONS: MM (INCHES) Product Dimensions 3.2 ± 0.2 (.126 ± .008) C 1.6 ± 0.2 (.063 ± .008) 0.51 ± 0.25 (.020 ± .010) 0.85 ± 0.2 (.033 ± .008) 1.6 ± 0.2 (.063 ± .008) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SF-1206SA-M Series - Automotive Grade Slow Blow SMD Fuses Solder Reflow Recommendations Tp MAX. RAMP UP RATE = 3 °C/s MAX. RAMP DOWN RATE = 6 °C/s TEMPERATURE (°C) TL Tsmax tp tL PREHEAT AREA Tsmin ts 25 TIME 25 °C TO PEAK TIME Tc -5 °C Profile Feature Preheat / Soak: Temperature Min. (Tsmin) Temperature Max. (Tsmax) Time (ts) from (Tsmin to Tsmax) Pb-Free Assembly 150 °C 200 °C 60~120 seconds Ramp Up Rate (TL to Tp) 3 °C / second max. Liquidous Temperature (TL) Time (tL) maintained above TL 217 °C 60~150 seconds Peak Package Body Temperature (Tp) 260 °C Time (tp)* within 5 °C of the specified classification temperature (Tc) 30 seconds* Ramp Down Rate (Tp to TL) 6 °C / second max. Time 25 °C to Peak Temperature 8 minutes max. * Tolerance for peak profile temperature (Tp ) is defined as a supplier minimum and a user maximum. Reliability Tests Test Items Visual Inspection Reference Standard MIL-STD-883 Method 2009 High Temperature Storage MIL-STD-202 Method 108 IEC 60068-2-1 JESD22 Method JA-104 MIL-STD-202 Method 103 MIL-STD-202 Method 108 JESD22 Method JB-100 MIL-STD-202 Method 204 MIL-STD-202 Method 213 MIL-STD-202 Method 210 MIL-STD-202 Method 101 MIL-STD-202 Method 208 AEC-Q200-006 AEC-Q200-005 Bourns Specification Low Temperature Storage Temperature Cycling Biased Humidity High Temperature Operating Life Physical Dimension Mechanical Vibration Mechanical Shock Resistance to Soldering Heat Salt Spray Solderability Terminal Strength Board Flex Electrical Characterization REV. 04/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL