S
CO
LO & MP
LI
GE
AN
N
T
FR
EE
SinglFuse™ SF-2410FP-T Series Features
n Single blow fuse for overcurrent protection
HA
n Ceramic tube design for fast acting precision fusing speed applications
n UL 248-14 listed
F
3A
**
*R
oH
n EIA 2410 (6125 metric) footprint
n Surface mount packaging for automated assembly
IA
NT
n RoHS compliant* and halogen free**
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
*R
oH
S
CO
M
PL
AD
FR
Fusing Time
LE
Model
Rated
Current
(A)
EE
Electrical Characteristics
Resistance
(Ω) Typ.***
Rated
Voltage
Interrupting
Rating
Typical
I2t (A2s)
****
0.062
6.653
0.0012
SF-2410FP008T-2
0.08
4.974
0.0017
SF-2410FP010T-2
0.1
3.014
0.0043
SF-2410FP0125T-2
0.125
2.044
0.0094
SF-2410FP016T-2
0.16
0.8655
0.0116
SF-2410FP020T-2
0.2
1.8535
0.0517
SF-2410FP025T-2
0.25
1.119
0.0528
SF-2410FP0315T-2
0.315
0.843
0.1365
SF-2410FP0375T-2
0.375
0.732
0.1502
SF-2410FP040T-2
0.4
0.4995
0.2149
SF-2410FP050T-2
0.5
0.476
0.358
SF-2410FP075T-2
0.75
SF-2410FP100T-2
1
SF-2410FP150T-2
1.5
SF-2410FP200T-2
2
0.0605
1.08
SF-2410FP250T-2
2.5
0.044
1.1471
SF-2410FP300T-2
3
0.036
1.548
SF-2410FP315T-2
3.15
0.033
2.6485
SF-2410FP350T-2
3.5
0.029
2.695
SF-2410FP400T-2
4
0.021
3.9744
SF-2410FP500T-2
5
0.013
6.175
SF-2410FP700T-2
7
0.01
9.016
SF-2410FP800T-2
8
0.0085
16.758
SF-2410FP1000T-2
10
0.006
24.42
Ro VER LEA
HS SI D F
CO ON RE
M SA E
PL R
IA E
NT
*
SF-2410FP0062T-2
Open within
5 sec.
at 200 %
rated current
0.2065
0.158
0.114
125
VAC
50 A @ 125 VAC
50 A @ 125 VDC
300 A @ 32 VDC
0.3761
0.4143
1.0606
Certifications
cUL
E198545
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
*** Resistance value measured with ≤10 % rated current at 25 °C ambient. Tolerance ±30 %.
**** Melting I2t calculated at 10 times rated current.
WARNING Cancer and Reproductive Harm
www.P65Warnings.ca.gov
* RoHS Directive 2015/863, Mar 31, 2015 and Annex..
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and
Chlorine (Cl) content is 1500 ppm or less.
“SinglFuse” is a trademark of Bourns, Inc.
Specifications are subject to change without notice. Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SinglFuse™ SF-2410FP-T Series Applications
n Notebooks
n PC Servers
n LCD Monitors
n Power Supplies
n LCD Backlight Inverters
n Game Consoles
n POE, POE+
n White Goods
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Reliability Testing
No.
Test
Test Condition
Temperature setup: 235 ±5 °C
Time setup: 10 ±1 sec.
Requirement
After test terminal electrode wetting
area must be greater than 95 %
Test Reference
1
Solderability
2
Resistance to
soldering heat
Temperature setup: 235 ±5 °C
Time setup: 30 ± 5 sec.
3
Thermal shock
Temperature setup:
25 °C ~ -65 °C ~ 25 °C ~ 125 °C
Time setup: -65 °C (30 min)
~ 25 °C (5 min) ~ 125 °C (30 min)
~ 25 °C (5 min), 5 cycles
DCR change ≤ ±15 %
No mechanical damage
4
Humidity unload
Heat (85 ±0.5 °C)
High Humidity (85 ±1 % RH)
240 hours
DCR change ≤ ±15 %
No mechanical damage
MIL-STD-202G
Method 103B
Test Condition A
5
Salt spray
Salt spray concentration: 5 ±1 %
Test liquid temperature: 35 ±0.5 °C
96 hours
DCR change ≤ ±15 %
No mechanical damage
MIL-STD-202G
Method 101E
Test Condition A
6
Bending
The board shall be bent by 1 mm
at a rate of 1 mm/sec.
DCR change ≤ ±15 %
IEC 60127-4
7
Vibration
Frequency setup: 10 ~ 55 ~ 10 Hz
Time setup: 1 Minute/cycle
(X-Y-Z, 120 cycles, 6 hours)
DCR change ≤ ±15 %
MIL-STD-202G
Method 201A
F
3A
1,000 pieces per 7-inch reel
MIL-STD-202G
Method 107G
Test Condition B
Construction
Operating Temperature���������������������������������������������������������������������������������� -55 °C to +125 °C
Storage Conditions
Temperature���������������������������������������������������������������������������������������������� +15 °C to +30 °C
Humidity���������������������������������������������������������������������������������������������������������� 20 % to 70 %
Shelf Life���������������������������������������������������������������������������2 years from manufacturing date
Moisture Sensitivity Level���������������������������������������������������������������������������������������������������������1
ESD Classification (HBM)����������������������������������������������������������������������������������������������Class 6
Packaging Quantity
IEC 60068-2-58
DCR change ≤ ±15 %
No mechanical damage
Environmental Characteristics
IEC 60068-2-58
END CAP
(GOLD-PLATED
BRASS)
CERAMIC TUBE
How to Order
SF - 2410 FP 0062 T - 2
SinglFuse™
Product Designator
SMD Footprint
2410 = EIA 2410
(6125 metric)
Fuse Blow Type
FP = Fast Acting Precision
Rated Current
0062 ~ 1000 (62 mA ~ 10 A)
Structure Type
T = Ceramic Tube
Packaging Type
- 2 = Tape & Reel
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
– Fast
Acting Precision
SMD Fuses
SF-2410FP-T
3312 - 2 Series
mm SMD
Trimming
Potentiometer
Typical Part Marking
Represents total content. Layout may vary.
F
3A
Rated Current
Part Marking
Rated Current
62 mA
62 mA
1A
1A
80 mA
80 mA
1.5 A
1.5 A
100 mA
100 mA
2A
2A
125 mA
125 mA
2.5 A
2.5 A
160 mA
160 mA
3A
3A
200 mA
200 mA
3.15 A
3.15 A
250 mA
250 mA
3.5 A
3.5 A
315 mA
315 mA
4A
4A
375 mA
375 mA
5A
5A
400 mA
400 mA
7A
7A
500 mA
500 mA
8A
8A
750 mA
750 mA
10 A
10 A
Product Dimensions
Part Marking
Recommended Pad Layout
2.95
(.116)
2.60 ± 0.10
(.102 ± .004)
6.10 ± 0.20
(.240 ± .008)
F
3A
1.45 ± 0.10
(.057 ± .004)
3.15
(.124)
2.15 ± 0.10
(.085 ± .004)
2.60 ± 0.10
(.102 ± .004)
DIMENSIONS:
1.96
(.077)
MM
(INCHES)
DIMENSIONS:
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Average Pre-Arcing Time vs. Current Curves
200 mA
200 mA
250 mA
250 mA
160 mA
160 mA
125 mA
125 mA
2A
500 mA
500 mA
62 mA62 mA
1A
1000010000
1000 1000
1000 1000
100 100
10
1
1
PRE-ARCING TIME (SECONDS)
1000010000
PRE-ARCING TIME (SECONDS)
100000
100000
PRE-ARCING TIME (SECONDS)
100000
100000
10
10
10
1
1
0.1 0.1
0.01 0.01
0.01 0.01
0.1 0.1
1
CURRENT
CURRENT
(A) (A)
1
2A
7A
10
10
8A
1A
5A
7A
8A
10 A 10 A
100 100
0.1 0.1
0.0010.001
0.01 0.01
5A
1.5 A 1.5 A
750 mA
750 mA
4A
4A
2.5 A 2.5 A
400 mA
400 mA
80 mA80 mA
3.5 A 3.5 A
3A
3A
375 mA
375 mA
100 mA
100 mA
PRE-ARCING TIME (SECONDS)
3.15 A3.15 A
315 mA
315 mA
0.0010.001
0.1 0.1
1
1
10
10
100 100
CURRENT
CURRENT
(A) (A)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Average I2t vs. t Curves
10000
10000
750750
mAmA
500500
mAmA
400400
mAmA
375375
mAmA
315315
mAmA
250250
mAmA
200200
mAmA
160160
mAmA
125125
mAmA
100100
mAmA
80 80
mAmA
62 62
mAmA
1000
1000
100100
1 1
100000
100000
10000
10000
1000
1000
0.10.1
100100
0.01
0.01
10 10
0.001
0.001
1 1
0.0001
0.0001
0.01
0.01
10 10
A A
8 A8 A
7 A7 A
5 A5 A
4 A4 A
3.53.5
A A
3.15
3.15
A A
3 A3 A
2.52.5
A A
2 A2 A
1.51.5
A A
1 A1 A
1000000
1000000
I2t (A22s)
I2t (A s)
I2t (A22s)
I2t (A s)
10 10
10000000
10000000
0.10.1
1 1
10 10
100100
1000
1000 10000
10000 100000
100000
TIME
TIME
(SECONDS)
(SECONDS)
0.10.1
0.01
0.01
0.10.1
1 1
10 10
100100
1000
1000 10000
10000 100000
100000
TIME
TIME
(SECONDS)
(SECONDS)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Solder Reflow Recommendations
tp
TP
CRITICAL ZONE
T L TO TP
RAMP-UP
Temperature
TL
tL
TS MAX.
Profile Feature
Preheat / Soak:
Temperature Min. (Tsmin)
Temperature Max. (Tsmax)
Time (ts) from (Tsmin to Tsmax)
Ramp Up Rate (TL to Tp)
RAMP-DOWN
TS MIN.
Ramp Up Rate (Tsmax to TL)
Liquidous Temperature (TL)
Time (tL) maintained above TL
ts
PREHEAT
Peak Package Body
Temperature (Tp)
25 °C
t 25 °C TO PEAK
Time within 5 °C of actual peak
temperature (Tp)
Time
Pb-Free Assembly
150 °C
200 °C
60~180 seconds
3 °C / second max.
5 °C / second max.
217 °C
60~90 seconds
235 °C ± 5 °C
20~30 seconds*
Ramp Down Rate (Tp to TL)
6 °C / second max.
Time 25 °C to Peak Temperature
8 minutes max.
Do not exceed
240 °C
* Tolerance for peak profile temperature (Tp ) is defined as a
supplier minimum and a user maximum.
Solder Wave Recommendations
Peak Temperature (Dwell Time)
300
280
260
240
Temperature (°C)
220
200
180
160
140
Profile Feature
Preheat:
Temperature Max. (Tsmax)
Time (Min. to Max.)
Pb-Free Assembly
150 °C
60~90 seconds
Solder Pot Temperature
260 °C max.
Solder Dwell Time
2~3 seconds
120
100
80
60
40
20
0
20
40
60
PREHEAT TIME
80
100
120
140
160
180
200
220
240
COOLING TIME
Time (Sec.)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Current Rating Thermal Derating Curve
120
DERATING (%)
100
80
60
40
25 °C
20
0
-60
-40
-20
0
20
40
60
80
100
120
140
AMBIENT TEMPERATURE (°C)
Pulse Cycle Withstand Capability
NUMBER OF PULSES
100,000
10,000
1,000
100
10 %
100 %
PULSE I2t / AVERAGE MELTING I2t
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SF-2410FP-T Series – Fast Acting Precision SMD Fuses
Packaging Specifications
178 ± 1
(7 ± .039)
DIA.
60 ± 0.50
(2.362 ± .019)
16 ± 0.5
(.630 ± .020)
1.50 ± 0.10
DIA.
(.059 ± .004)
4.00 ± 0.05
(.157 ± .002)
1.75 ± 0.10
(.069 ± .004)
SECTION B-B
0.25 ± 0.05
(.010 ± .002)
B
1.50 ± 0.10
(.059 ± .004)
DIA.
5.50 ± 0.05
(.216 ± .002)
SECTION A-A
6.50 ± 0.10
(.256 ± .004)
A
A
12.00 ± 0.20
(.472 ± .008)
B
4.00 ± 0.10
(.157 ± .004)
2.00 ± 0.05
(.079 ± .002)
2.90 ± 0.10
(.114 ± .004)
2.80 ± 0.10
(.110 ± .004)
DIMENSIONS:
MM
(INCHES)
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
REV. 03/20
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
