SMA6J58A-Q

AN T GRADE ** AE C- *R Q1 oH 01 S a CO nd M PL I AUTOMOTIVE Features Applications ■ Surface Mount SMA package ■ Protection of power buses ■ Standoff Voltage: 5 to 130 volts ■ Protection of I/O interfaces ■ Power Dissipation: 600 watts ■ Overvoltage transient protection ■ RoHS compliant* ■ Telecom, computer, industrial and consumer electronics applications ■ AEC-Q101 compliant** SMA6J-Q Transient Voltage Suppressor Diode Series General Information Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 130 V. Typical fast response times are less than 1.0 picosecond from 0 V to Breakdown Voltage. Additional Information Click these links for more information: PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY Bourns® Chip Diodes are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. CONTACT Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 600 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 40 Amps TJ -55 to +150 °C TSTG -55 to +150 °C Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Mounted on 5.0 mm2 (0.03 mm thick) copper pads to each terminal. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **”Q” part number suffix indicates AEC-Q101 compliance. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMA6J-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) - Continued Unidirectional Device Bidirectional Device Breakdown Voltage VBR (Volts) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current Part No. Marking Part No. Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) VRSM (V) IRSM (A) SMA6J5.0A-Q SMA6J6.0A-Q SMA6J6.5A-Q SMA6J7.0A-Q SMA6J7.5A-Q SMA6J8.0A-Q SMA6J8.5A-Q SMA6J9.0A-Q SMA6J10A-Q SMA6J11A-Q SMA6J12A-Q SMA6J13A-Q SMA6J14A-Q SMA6J15A-Q SMA6J16A-Q SMA6J17A-Q SMA6J18A-Q SMA6J20A-Q SMA6J22A-Q SMA6J24A-Q SMA6J26A-Q SMA6J28A-Q SMA6J30A-Q SMA6J33A-Q SMA6J36A-Q SMA6J40A-Q SMA6J43A-Q SMA6J45A-Q SMA6J48A-Q SMA6J51A-Q SMA6J54A-Q SMA6J58A-Q SMA6J60A-Q SMA6J64A-Q SMA6J70A-Q SMA6J75A-Q SMA6J78A-Q SMA6J85A-Q SMA6J90A-Q SMA6J100A-Q SMA6J110A-Q SMA6J120A-Q SMA6J130A-Q 6HEQ 6HGQ 6HKQ 6HMQ 6HPQ 6HRQ 6HTQ 6HVQ 6HXQ 6HZQ 6IEQ 6IGQ 6IKQ 6IMQ 6IPQ 6IRQ 6ITQ 6IVQ 6IXQ 6IZQ 6JEQ 6JGQ 6JKQ 6JMQ 6JPQ 6JRQ 6JTQ 6JVQ 6JXQ 6JZQ 6KEQ 6KGQ 6KKQ 6KMQ 6KPQ 6KRQ 6KTQ 6KVQ 6KXQ 6KZQ 6LEQ 6LGQ 6LKQ SMA6J5.0CA-Q SMA6J6.0CA-Q SMA6J6.5CA-Q SMA6J7.0CA-Q SMA6J7.5CA-Q SMA6J8.0CA-Q SMA6J8.5CA-Q SMA6J9.0CA-Q SMA6J10CA-Q SMA6J11CA-Q SMA6J12CA-Q SMA6J13CA-Q SMA6J14CA-Q SMA6J15CA-Q SMA6J16CA-Q SMA6J17CA-Q SMA6J18CA-Q SMA6J20CA-Q SMA6J22CA-Q SMA6J24CA-Q SMA6J26CA-Q SMA6J28CA-Q SMA6J30CA-Q SMA6J33CA-Q SMA6J36CA-Q SMA6J40CA-Q SMA6J43CA-Q SMA6J45CA-Q SMA6J48CA-Q SMA6J51CA-Q SMA6J54CA-Q SMA6J58CA-Q SMA6J60CA-Q SMA6J64CA-Q SMA6J70CA-Q SMA6J75CA-Q SMA6J78CA-Q SMA6J85CA-Q SMA6J90CA-Q 6TEQ 6TGQ 6TKQ 6TMQ 6TPQ 6TRQ 6TTQ 6TVQ 6TXQ 6TZQ 6UEQ 6UGQ 6UKQ 6UMQ 6UPQ 6URQ 6UTQ 6UVQ 6UXQ 6UZQ 6VEQ 6VGQ 6VKQ 6VMQ 6VPQ 6VRQ 6VTQ 6VVQ 6VXQ 6VZQ 6WEQ 6WGQ 6WKQ 6WMQ 6WPQ 6WRQ 6WTQ 6WVQ 6WXQ 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100.0 111.0 122.0 133.0 144.0 7.00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104.0 111.0 123.0 135.0 147.0 159.0 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 800 800 500 200 100 50 20 10 5 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 65.3 58.3 53.6 50.0 46.6 44.2 41.7 39.0 35.3 33.0 30.2 28.0 25.9 24.6 23.1 21.8 20.6 18.6 16.9 15.5 14.3 13.3 12.4 11.3 10.4 9.3 8.7 8.3 7.8 7.3 6.9 6.5 6.2 5.9 5.3 5.0 4.8 4.4 4.1 3.7 3.4 3.1 2.9 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VRWM of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMA6J-Q Transient Voltage Suppressor Diode Series Performance Graphs Peak Pulse Power Rating Pulse Derating Curve Peak Pulse Power Derating in Percent of Peak Power or Current PPPM - Peak Pulse Power (kW) 10 NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 3 TA = 25 °C 1.0 5.0 5.0 x COPPER PAD AREAS (0.20) (0.20) 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 100 75 50 25 0 0 10 ms Pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM. Peak value (IPPM) Half value= CJ - Junction Capacitance (pF) IPPM - Peak Pulse Current (% IRSM) 10000 TJ = 25 °C tr=10 µs IPPM 2 10/1000 µs waveform as defined by R.E.A. 50 0 150 175 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 Bidirectional @ VR 1 1.0 2.0 3.0 10 1 4.0 IFSM - Peak Forward Surge Current (A) 2.5 2.0 1.5 1.0 0.5 0.0 75 100 1000 Maximum Non-repetitive Forward Surge Current 3.0 50 100 VBR - Reverse Breakdown Voltage (V) Steady State Power Derating Curve 25 Unidirectional v-0v Unidirectional @ VR t - Time (ms) Steady State Power Dissipation (W) 125 Bidirectional v-0v 1000 TA=25 °C Td 0 100 Typical Junction Capacitance 150 0 75 TA - Ambient Temperature ( °C) Pulse Waveform 100 50 25 Td - Pulse Width (Seconds) 125 TL - Lead Temperature (°C) 150 175 45 Unidirectional Only 40 35 30 25 20 15 10 5 0 1 10 100 Number of Cycles at 60 Hz Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMA6J-Q Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D B (Min.) E C (Min.) Dimension A B C D E F G H SMA (DO-214AC) 3.99 - 4.50 (0.157 - 0.177) 2.54 - 2.79 (0.100 - 0.110) 1.25 - 1.65 (0.049 - 0.065) 0.15 - 0.31 (0.006 - 0.012) 4.93 - 5.28 (0.194 - 0.208) 0.203 MAX. (0.008) 1.98 - 2.29 (0.078 - 0.090) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMA (DO-214AC) 2.70 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device How to Order SMA6J 5.0 CA - Q Package SMA6J = 600 W, SMA/DO-214AC Working Peak Reverse Voltage 5.0 - 130 = 5.0 - 130 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device MM (INCHES) AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch Reel Typical Part Marking MANUFACTURER’S TRADEMARK YWW XXXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMA6J-Q Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... Leader ....... ....... ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Devices are packed as shown here in compliance with EIA-481-C standard. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel MM (INCHES) -- SMA (DO-214AC) 13-Inch Reel 2.90 ± 0.20 (0.114 ± 0.008) 5.50 ± 0.20 (0.217 ± 0.008) 2.26 ± 0.20 (0.089 ± 0.008) 1.50 ± 0.10 (0.061 ± 0.004) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724) 5,000 REV. 10/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL