SMBJ100A

PL IA NT Features ■ RoHS compliant* ■ Surface Mount SMB package ■ Standoff Voltage: 5.0 to 170 volts ■ Power Dissipation: 600 watts Applications ■ IEC 61000-4-2 ESD (Min. Level 4) ■ IEC 61000-4-4 EFT ■ IEC 61000-4-5 Surge *R oH S CO M SMBJ Transient Voltage Suppressor Diode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Steady State Power Dissipation @ TL = 75 °C Maximum Instantaneous Forward Voltage @ IPP = 50 A (For Unidirectional Units Only) Operating Temperature Range Storage Temperature Range 1. 2. 3. 4. 5. Symbol PPK IFSM PM(AV) VF TJ TSTG Value 600 100 5.0 (Note 5) Unit Watts Amps Watts Volts °C °C -55 to +150 -55 to +175 Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %. VF = 3.5 V on SMBJ5.0A through SMBJ90A and VF= 5.0 V on SMBJ100A through SMBJ170A. How to Order SMBJ 5.0 CA Package SMBJ = SMA/DO-214AA Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMBJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Breakdown Voltage VBR (Volts) Min. 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 50 53.3 56.7 60 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 144 167 178 189 Unidirectional Device Part Number Part Marking Bidirectional Device Part Number Part Marking Working Peak Reverse Voltage VRWM (Volts) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 Maximum Reverse Leakage @ VRWM IR (μA) 800 800 500 200 100 50 20 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current Max. 7.25 7.67 8.30 8.95 9.58 10.2 10.8 11.5 12.8 14.4 15.3 16.5 17.9 19.2 20.5 21.7 23.3 25.5 28.0 30.7 32.2 35.8 38.3 42.2 46.0 51.1 54.9 57.5 61.3 65.2 69 74.6 76.7 81.8 89.5 95.8 99.7 109 116 128 140 153 165 192 205 218 @ IT (mA) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 VRSM (Volts) IRSM (Amps) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 65.2 58.3 53.6 50.0 46.5 44.1 41.7 39.0 35.3 33.0 30.2 27.9 25.8 24.0 23.1 21.7 20.5 18.5 16.9 15.4 14.2 13.2 12.4 11.3 10.3 9.3 8.6 8.3 7.7 7.3 6.9 6.4 6.2 5.8 5.3 4.9 4.7 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 SMBJ5.0A KE SMBJ5.0CA AE SMBJ6.0A KG SMBJ6.0CA AG SMBJ6.5A KK SMBJ6.5CA AK SMBJ7.0A KM SMBJ7.0CA AM SMBJ7.5A KP SMBJ7.5CA AP SMBJ8.0A KR SMBJ8.0CA AR SMBJ8.5A KT SMBJ8.5CA AT SMBJ9.0A KV SMBJ9.0CA AV SMBJ10A KX SMBJ10CA AX SMBJ11A KZ SMBJ11CA AZ SMBJ12A LE SMBJ12CA BE SMBJ13A LG SMBJ13CA BG SMBJ14A LK SMBJ14CA BK SMBJ15A LM SMBJ15CA BM SMBJ16A LP SMBJ16CA BP SMBJ17A LR SMBJ17CA BR SMBJ18A LT SMBJ18CA BT SMBJ20A LV SMBJ20CA BV SMBJ22A LX SMBJ22CA BX SMBJ24A LZ SMBJ24CA BZ SMBJ26A ME SMBJ26CA CE SMBJ28A MG SMBJ28CA CG SMBJ30A MK SMBJ30CA CK SMBJ33A MM SMBJ33CA CM SMBJ36A MP SMBJ36CA CP SMBJ40A MR SMBJ40CA CR SMBJ43A MT SMBJ43CA CT SMBJ45A MV SMBJ45CA CV SMBJ48A MX SMBJ48CA CX SMBJ51A MZ SMBJ51CA CZ SMBJ54A NE SMBJ54CA DE SMBJ58A NG SMBJ58CA DG SMBJ60A NK SMBJ60CA DK SMBJ64A NM SMBJ64CA DM SMBJ70A NP SMBJ70CA DP SMBJ75A NR SMBJ75CA DR SMBJ78A NT SMBJ78CA DT SMBJ85A NV SMBJ85CA DV SMBJ90A NX SMBJ90CA DX SMBJ100A NZ SMBJ100CA DZ SMBJ110A PE SMBJ110CA EE SMBJ120A PG SMBJ120CA EG SMBJ130A PK SMBJ130CA EK SMBJ150A PM SMBJ150CA EM SMBJ160A PP SMBJ160CA EP SMBJ170A PR SMBJ170CA ER Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine Wave of 8.3 ms Pulse Width. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMBJ Transient Voltage Suppressor Diode Series Product Dimensions A Recommended Footprint A B C B C G Dimension A (Max.) H F E D B (Min.) C (Min.) Dimension A B C D E F G H SMB (DO-214AA) 4.06 - 4.57 (0.160 - 0.180) 3.30 - 3.94 (0.130 - 0.155) 1.96 - 2.21 (0.077 - 0.087) 0.15 - 0.31 (0.006 - 0.112) 5.21 - 5.59 (0.205 - 0.220) 0.05 - 0.20 (0.002 - 0.008) 2.01 - 2.62 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) MM (INCHES) SMB (DO-214AA) 2.69 (0.106) 2.10 (0.083) 1.27 (0.050) MM (INCHES) DIMENSIONS: Physical Specifications Case ..........................................Molded plastic per UL Class 94V-0 Polarity ..................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight ..................................................0.003 ounces / 0.093 grams DIMENSIONS: Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SMBJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve 100 Peak Pulse Derating in Percent of Peak Power or Current Maximum Non-Repetitive Surge Current Peak Forward Surge Current (Amps) 120 100 80 60 40 20 0 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 1 2 5 10 20 50 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 0 0 25 50 75 100 125 150 175 200 Ambient Temperature (°C) Number of Cycles at 60 Hz Pulse Waveform TR=10 µs 100 IP, Peak Pulse Current (%) Peak value (IRSM) IRSM Half value= 2 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. TA=25 °C TP 10 x 1000 waveform as defined by R.E.A. Typical Junction Capacitance 10000 TA = 25 °C Unidirectional Capacitance (pF) 1000 Bidirectional 50 100 0 0 1.0 2.0 T, Time (ms) 3.0 4.0 0 0 10 100 Standoff Voltage (Volts) 1000 Pulse Rating Curve 100 TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph Steady State Power Derating Curve 5.0 RM(AV) Steady State Power Dissipation (W) 4.0 PP, Peak Power (KW) 10 3.0 2.0 1.0 5.0 mm Lead Areas 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms TP, Pulse Width CDDFN5-0504N -Voltage Suppressor Diode Series SMBJ Transient TVS/Steering Diode Array Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d E Index Hole T 120 ° F W B D2 D1 D P Trailer A Device C Leader End ....... ....... 10 pitches (min.) ....... ....... ....... ....... ....... ....... 10 pitches (min.) W1 Start DIMENSIONS: MM (INCHES) Direction of Feed Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Item Carrier Width Carrier Length Carrier Depth Sprocket Hole Reel Outside Diameter Reel Inner Diameter Feed Hole Diameter Sprocket Hole Position Punch Hole Position Punch Hole Pitch Sprocket Hole Pitch Embossment Center Overall Tape Thickness Tape Width Reel Width Quantity per Reel Symbol A B C d D D1 D2 E F P P0 P1 T W W1 -- SMB (DO-214AA) 4.94 ± 0.10 (0.194 - 0.004) 5.57 ± 0.10 (0.210 ± 0.004) 2.36 ± 0.10 (0.093 ± 0.004) 1.55 ± 0.05 (0.061 ± 0.002) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.20 (0.472 ± 0.008) 18.4 MAX. (0.724) 3,000 02/10 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.