Features
Applications
n Surface Mount SMB package
n IEC 61000-4-4 EFT
n Standoff Voltage: 5 to 495 volts
n IEC 61000-4-5 Surge
n RoHS compliant*
n IEC 61000-4-2 ESD (Min. Level 4)
n Power Dissipation: 600 watts
SMBJ Transient Voltage Suppressor Diode Series
General Information
Agency Recognition
The markets of portable communications, computing and video equipment are challenging
the semiconductor industry to develop
increasingly smaller electronic components.
Description
UL
File Number: E153537
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection
applications, in compact chip package DO-214AA (SMB) size format. The Transient Voltage
Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 495
V and Breakdown Voltage up to 550 V. Typical fast response times are less than 1.0
picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices
from 0 V to Minimum Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick
and place equipment and the flat configuration minimizes roll away.
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Parameter
Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2)
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
Steady State Power Dissipation @ TL = 75 °C
Maximum Instantaneous Forward Voltage @ IPP = 50 A
(For Unidirectional Units Only)
Symbol
Value
Unit
PPK
600
Watts
IFSM
100
Amps
PM(AV)
5.0
Watts
VF
3.5
5.0
Volts
TJ
-55 to +150
°C
-55 to +150
°C
SMBJ5.0A ~ SMBJ90A
SMBJ100A ~ SMBJ495A
Operating Temperature Range
Storage Temperature Range
TSTG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
How to Order
Asia-Pacific:
Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
Europe:
Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
SMBJ 5.0 CA - H
Package
SMBJ = SMB/DO-214AA
Working Peak Reverse Voltage
5.0 = 5.0 VRWM (Volts)
Suffix
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
Reel
(blank) = 13 inch reel
-H = 7 inch reel
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SMBJ Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Unidirectional Device
Bidirectional Device
Breakdown Voltage
VBR (Volts)
Part No.
Marking
Part No.
Marking
Min.
Max.
SMBJ5.0A
SMBJ6.0A
SMBJ6.5A
SMBJ7.0A
SMBJ7.5A
SMBJ8.0A
SMBJ8.5A
SMBJ9.0A
SMBJ10A
SMBJ11A
SMBJ12A
SMBJ13A
SMBJ14A
SMBJ15A
SMBJ16A
SMBJ17A
SMBJ18A
SMBJ20A
SMBJ22A
SMBJ24A
SMBJ26A
SMBJ28A
SMBJ30A
SMBJ33A
SMBJ36A
SMBJ40A
SMBJ43A
SMBJ45A
SMBJ48A
SMBJ51A
SMBJ54A
SMBJ58A
SMBJ60A
SMBJ64A
SMBJ70A
SMBJ75A
SMBJ78A
SMBJ85A
SMBJ90A
SMBJ100A
SMBJ110A
SMBJ120A
SMBJ130A
SMBJ150A
SMBJ160A
SMBJ170A
SMBJ180A
SMBJ200A
SMBJ220A
SMBJ250A
SMBJ300A
SMBJ350A
SMBJ376A
SMBJ400A
SMBJ408A
SMBJ440A
SMBJ495A
KE
KG
KK
KM
KP
KR
KT
KV
KX
KZ
LE
LG
LK
LM
LP
LR
LT
LV
LX
LZ
ME
MG
MK
MM
MP
MR
MT
MV
MX
MZ
NE
NG
NK
NM
NP
NR
NT
NV
NX
NZ
PE
PG
PK
PM
PP
PR
PT
PV
PX
PZ
QE
QG
376A
QK
408A
QM
495A
SMBJ5.0CA
SMBJ6.0CA
SMBJ6.5CA
SMBJ7.0CA
SMBJ7.5CA
SMBJ8.0CA
SMBJ8.5CA
SMBJ9.0CA
SMBJ10CA
SMBJ11CA
SMBJ12CA
SMBJ13CA
SMBJ14CA
SMBJ15CA
SMBJ16CA
SMBJ17CA
SMBJ18CA
SMBJ20CA
SMBJ22CA
SMBJ24CA
SMBJ26CA
SMBJ28CA
SMBJ30CA
SMBJ33CA
SMBJ36CA
SMBJ40CA
SMBJ43CA
SMBJ45CA
SMBJ48CA
SMBJ51CA
SMBJ54CA
SMBJ58CA
SMBJ60CA
SMBJ64CA
SMBJ70CA
SMBJ75CA
SMBJ78CA
SMBJ85CA
SMBJ90CA
SMBJ100CA
SMBJ110CA
SMBJ120CA
SMBJ130CA
SMBJ150CA
SMBJ160CA
SMBJ170CA
SMBJ180CA
SMBJ200CA
SMBJ220CA
SMBJ250CA
SMBJ300CA
SMBJ350CA
SMBJ376CA
SMBJ400CA
SMBJ408CA
SMBJ440CA
SMBJ495CA
AE
AG
AK
AM
AP
AR
AT
AV
AX
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
CR
CT
CV
CX
CZ
DE
DG
DK
DM
DP
DR
DT
DV
DX
DZ
EE
EG
EK
EM
EP
ER
ET
EV
EX
EZ
WE
WG
376C
WK
408C
WM
495C
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40
44.4
47.8
50
53.3
56.7
60
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
201
224
246
279
335
391
418
447
456
492
522
7.00
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
111
123
135
147
159
185
197
209
222
247
272
309
371
432
462
494
504
543
578
@ IT
(mA)
10
10
10
10
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Working Maximum
Peak
Reverse
Reverse Leakage
Voltage @ VRWM
VRWM
(V)
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
250
300
350
376
400
408
440
495
IR
(μA)
800
800
500
200
100
50
20
10
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
Maximum
Clamping
Voltage
@ Ipp
Maximum
Peak
Pulse
Current
Maximum
Clamping
Voltage
@ Ipp
Maximum
Peak
Pulse
Current
Vc
(V)
Ipp
(A)
Vc
(V)
Ipp
(A)
(10/1000 µs)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
292
324
356
405
486
567
602
648
658
713
760
(10/1000 µs)
65.3
58.3
53.6
50.0
46.6
44.2
41.7
39.0
35.3
33.0
30.2
28.0
25.9
24.6
23.1
21.8
20.6
18.6
16.9
15.5
14.3
13.3
12.4
11.3
10.4
9.3
8.7
8.3
7.8
7.3
6.9
6.5
6.2
5.9
5.3
5.0
4.8
4.4
4.1
3.7
3.4
3.1
2.9
2.5
2.3
2.2
2.1
1.9
1.7
1.5
1.3
1.1
1.0
0.9
0.9
0.9
0.8
(8/20 µs)
12.0
13.4
14.6
15.6
16.8
17.7
18.7
20.0
22.1
23.7
25.9
28.0
30.2
31.7
33.8
35.9
38.0
42.1
46.2
50.6
54.7
59.0
62.9
69.3
75.5
83.9
90.2
94.5
100.6
107.1
113.2
121.7
125.8
133.9
146.9
157.3
163.8
178.1
189.8
210.6
230.1
250.9
271.7
315.9
336.7
357.5
379.6
421.2
462.8
526.5
631.8
737.1
782.6
842.4
855.4
926.9
988.0
(8/20 µs)
326.5
291.5
268.0
250.0
233.0
221.0
208.5
195.0
176.5
165.0
151.0
140.0
129.5
123.0
115.5
109.0
103.0
93.0
84.5
77.5
71.5
66.5
62.0
56.5
52.0
46.5
43.5
41.5
39.0
36.5
34.5
32.5
31.0
29.5
26.5
25.0
24.0
22.0
20.5
18.5
17.0
15.5
14.5
12.5
11.5
11.0
10.5
9.5
8.5
7.5
6.5
5.5
5.0
4.5
4.6
4.5
3.9
Notes:
1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device.
2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device.
3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SMBJ Transient Voltage Suppressor Diode Series
Product Dimensions
Recommended Footprint
A
A
A
B
C
A
B
B
C
G
D
Dimension
A (Max.)
FC
H
D
E
Dimension
A
B
C
D
E
F
G
H
SMBMM
(DO-214AA)
DIMENSIONS:
4.06 - 4.57
(INCHES)
(0.160 - 0.180)
3.30 - 3.94
E
(0.130 - 0.155)
1.95 - 2.20
(0.077 - 0.087)
MM
DIMENSIONS:
0.15 - 0.31
(INCHES)
(0.006 - 0.012)
5.21 - 5.59
(0.205 - 0.220)
0.05 - 0.203
(0.002 - 0.008)
2.13 - 2.44
(0.084 - 0.096)
0.76 - 1.52
(0.030 - 0.060)
DIMENSIONS:
F
B (Min.)
C (Min.)
B
C
SMB (DO-214AA)
2.69
(0.106)
2.10
(0.083)
1.27
(0.050)
DIMENSIONS:
MM
(INCHES)
Physical Specifications
Case............................................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
Weight............................................................................0.093 grams
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SMBJ Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating
100 Curve
Maximum Non-Repetitive Surge Current
100
100 100
100100
75
75
75
75
75 75
50
50
50
50
50 50
25
25
25
25
10 x 1000 Waveform as Defined
25 2510 x 1000 Waveform as Defined
10 x 1000 Waveform as Defined
10 x 1000 Waveform as Defined
by R.E.A.by R.E.A.
10 x 1000 Waveform as Defined
10 x 1000 Waveform as Defined
by R.E.A.
by R.E.A.
0
0
by R.E.A.
by R.E.A.
0
25
50 100
75
100
125 175
150 200
175
200
0 0 0 025
50
75
125
150
50
75
100
125 125
150 150
175 175
200 200
00
0 25
25
50
75
100
°C) 175175 200200
50 75 Ambient Temperature (
75 100100 125°C)
125 150150
0 0 25 25 50Ambient Temperature (
Ambient Temperature (
°C) °C)
Ambient Temperature (
Ambient Temperature (
Ambient Temperature (
°C) °C)
Pulse Waveform
Typical Junction Capacitance
PPP, Peak Power (KW)
P, Peak Power (KW)
P, Peak Power (KW)
PP, Peak Power (KW)
PP
P, Peak Power (KW)
PP, Peak Power (KW)
10
10
10
10
10 10
1.0
1.0
1.0 1.0
1.0 1.0
5.0 mm Lead Areas
5.0 mm Lead Areas
5.0 mm Lead Areas
5.0 mm Lead Areas
5.0 mm Lead Areas
5.0 mm Lead Areas
Capacitance (pF)
Capacitance (pF)
Bidirectional
Bidirectional
Bidirectional
Bidirectional
Bidirectional
Bidirectional
100
100
100 100
100100
10
10
10
1 10 1
10 110
1
1 1
4.0
4.0
4.0 4.0
4.0 4.0
TA = 25 °C
TA = 25 °C
TA = 25 °C
TA = 25 °C
TA = 25 °C
TA = 25 °C
Non-repetitive
Non-repetitive
Non-repetitive
Non-repetitive
Pulse Waveform
Pulse Waveform
Non-repetitive
Non-repetitive
Pulse Waveform
Pulse Waveform
Shown in Pulse Waveform Graph
Shown in Pulse Waveform Graph
Pulse Waveform
Pulse Waveform
Shown in Pulse Waveform Graph
Shown in Pulse Waveform Graph
Shown in Pulse Waveform Graph
Shown in Pulse Waveform Graph
Unidirectional
Unidirectional
Unidirectional
Unidirectional
Unidirectional
Unidirectional
TA = 25 °C
TA = 25 °C
TA = 25 °C
TA = 25 °C
TA = 25 °C
TA = 25 °C
10
100
10
100
10
100 100
10
Standoff Voltage (Volts)
10
10 Standoff Voltage (Volts)
100100
Standoff Voltage (Volts)
Standoff Voltage (Volts)
Standoff Voltage (Volts)
Standoff Voltage (Volts)
1000 1000
1000 1000
1000
1000
Steady State Power Derating Curve
5.0
5.0
5.0 5.0
5.0 5.0
0.1
0.1
0.1 0.10.1 µs
1.0 ms 1.0 ms
0.1 µs
1.0 µs 1.0 µs
10 µs 10 µs100 µs 100 µs
10 ms 10 ms
0.1
1.0 µs 1.0 µs10 µs 10 µs 100 µs100 µs1.0 ms1.0 ms10 ms 10 ms
0.1 0.1 µs 0.1 µs
TP, Pulse Width
100 µs
1.0 ms
0.1 µs
1.0 µs
10 µs
10 ms
100 µs
1.0 ms
0.1 µs
1.0 µs
10 µsTP, Pulse Width
10 ms
TP, Pulse Width
TP, Pulse Width
TP, Pulse Width
TP, Pulse Width
RM(AV) Steady State Power Dissipation (W)
RM(AV) Steady State Power Dissipation (W)
100
100
100 100
100100
1000 1000
1000 1000
1000
1000
RM(AV) Steady State Power Dissipation (W)
RM(AV) Steady State Power Dissipation (W)
RM(AV) Steady State Power Dissipation (W)
RM(AV) Steady State Power Dissipation (W)
Pulse Rating Curve
1.0 2.0
2.0
3.0
1.0
3.0
1.0 1.0 2.0 2.0
3.0 3.0
T, Time (ms)
1.0 1.0
2.0 2.0T, Time (ms)
3.0 3.0
T, Time (ms)
T, Time (ms)
T, Time (ms)
T, Time (ms)
10000 10000
10000 10000
10000
10000
Capacitance (pF)
Capacitance (pF)
Capacitance (pF)
Capacitance (pF)
IP, Peak Pulse Current (%)
IP, Peak Pulse Current (%)
IP, Peak Pulse Current (%)
IPI, Peak Pulse Current (%)
P, Peak Pulse Current (%)
IP, Peak Pulse Current (%)
TR=10 µs
TR=10 µs
TR=10 µs
TR=10 µs
Peak value (IRSM)
Peak value (IRSM)
TR=10 µs
TR=10 µs
100
Peak value (IRSM)
100
Peak value (IRSM)
100 100
Peak value (IRSM)
IRSM IRSM
Peak value (IRSM)
Half value=
Half value=
IRSM IRSM
100100
Half value=
2 IRSM 2
Half value=
IRSM
2
2
Half value=
Half value=
2 2
Pulse width (TP)
Pulse width (TP)
Pulse width (TP)
Pulse width (TP)
is defined as that point
is defined as that point
is defined as that point
Pulse width (TP)
Pulse width (TP)
is defined as that point
where the peak current
where the peak current
where the peak current
is defined as that point
is defined as that point
where the peak current
decays to 50 % of IPSM.
decays to 50 % of IPSM.
50
50
decays to 50 % of IPSM.
where the peak current
where the peak current
decays to 50 % of IPSM.
50
50
decays to 50 % of IPSM.
decays to 50 % of IPSM.
10 x 1000 waveform
50 50
10 x 1000 waveform
10 x 1000 waveform
TA=25 °C
10 x 1000 waveform
TA=25 °C
as defined by R.E.A.
as defined by R.E.A.
TA=25 °C
as defined by R.E.A.
10 x 1000 waveform
TA=25 °C
10 x 1000 waveform
as defined by R.E.A.
TP
TP
TA=25 °C
as defined by R.E.A.
TA=25 °C
TP
as defined by R.E.A.
TP
TP TP
0
0
0
00
0
0 00
0
0 0
Peak Forward Surge Current (Amps)
Peak Forward Surge Current (Amps)
Peak Pulse Derating in Percent of
Peak Pulse Derating in Percent of
Peak Pulse Derating in Percent of
Peak Power or Current
Peak Power or Current
Peak Pulse Derating in Percent of
Peak Power or Current
Peak Power or Current
Peak Pulse Derating in Percent of
Peak Pulse Derating in Percent of
Peak Power or Current
Peak Power or Current
Peak Forward Surge Current (Amps)
Peak Forward Surge Current (Amps)
Peak Forward Surge Current (Amps)
Peak Forward Surge Current (Amps)
120
120
120 120
120120
100
100
100 100
100100
80
80
80
80
80 80
60
60
60
60
60 60
40
40
40
40
Pulse Width 8.3 ms
40 40
Pulse Width 8.3 ms
Pulse Width 8.3 ms
Pulse Width 8.3 ms
20 Single Half Sine-Wave
20
Single Half Sine-Wave
20
Pulse Width 8.3 ms
20 Single Half Sine-Wave
Pulse Width 8.3 ms
Single Half Sine-Wave
20 20
Single Half Sine-Wave
Single Half Sine-Wave
0
0
01
0 21
2 5
5 10
10
20 50
50 100
100
20
5
0 10
12
2
5 10
1020
20 50
50 100 100
5
Number of Cycles at 60 Hz
1 1 2 2
5 Number of Cycles at 60 Hz
10 10 20 20
50 50
100100
Number of Cycles at 60 Hz
Number of Cycles at 60 Hz
Number of Cycles at 60 Hz
Number of Cycles at 60 Hz
4.0
4.0
4.0 4.0
4.0
4.0
3.0
3.0
3.0 3.0
3.0 3.0
2.0
2.0
2.0 2.0
2.0
2.0
1.0
1.0
1.0 1.0
1.0 1.0
60 Hz Resistive or
60 Hz Resistive or
60 Hz Resistive or
60 Hz Resistive or
Inductive Load
Inductive Load
60 Hz Resistive or
60 Hz Resistive or
Inductive Load
Inductive Load
0.0
0.0
Inductive Load
Inductive Load
0.0 0.0 0
25
50
75
100
125
150
175
200
0
25
50
75
100
125
150
175
200
0
100 100125 125
150 150
175 175
200 200
0.0 0.0
0 25
5075
2550
75
TL, Lead Temperature (°C)
0
25
50
75
100
125
150
175
200
TL, Lead Temperature (°C)
0
25
50
75
100
125
150
175
200
TL, Lead Temperature (°C)
TL, Lead Temperature (°C)
TL, Lead Temperature (°C)
TL, Lead Temperature (°C)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
SMBJ Transient -Voltage
Suppressor
CDDFN5-0504N
TVS/Steering
DiodeDiode
ArraySeries
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).
P
0
P
1
d
T
E
Index Hole
120 °
F
D2
W
B
D1 D
P
Trailer
.......
.......
End
A
Unidirectional
Product
Orientation
C
Device
.......
.......
.......
.......
10 pitches (min.)
Leader
.......
.......
DIMENSIONS:
MM
(INCHES)
10 pitches (min.)
Direction of Feed
Item
Symbol
Carrier Width
A
Carrier Length
B
Carrier Depth
C
Sprocket Hole
d
Reel Outside Diameter
D
Reel Inner Diameter
D1
Feed Hole Diameter
D2
Sprocket Hole Position
E
Punch Hole Position
F
Punch Hole Pitch
P
Sprocket Hole Pitch
P0
Embossment Center
P1
Overall Tape Thickness
T
Tape Width
W
Reel Width
W1
Quantity per Reel
REV. 03/20
W1
Start
--
Devices are packed in accordance with EIA standard
RS-481-A and specifications shown here.
SMB (DO-214AA)
7 Inch Reel
13 Inch Reel
3.67 ± 0.20
(0.144 ± 0.008)
5.60 ± 0.20
(0.220 ± 0.008)
2.57 ± 0.20
(0.101 ± 0.008)
1.50 ± 0.10
(0.059 ± 0.004)
178
330
(7.008)
(12.992)
50.0
MIN.
(1.969)
13.0 ± 0.20
(0.512 ± 0.008)
1.75 ± 0.10
(0.069 ± 0.004)
5.50 ± 0.05
(0.217 ± 0.002)
8.00 ± 0.10
(0.315 ± 0.004)
4.00 ± 0.10
(0.157 ± 0.004)
2.00 ± 0.05
(0.079 ± 0.002)
0.30 ± 0.10
(0.012 ± 0.004)
12.00 ± 0.30
(0.472 ± 0.012)
18.4
MAX.
(0.724)
500
3,000
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
