SMBJ24CA-Q

AN T GRADE ** AE C- *R Q1 oH 01 S a CO nd M PL I AUTOMOTIVE Features ■ ■ ■ ■ ■ Surface Mount SMB package Standoff Voltage: 5 to 220 volts Power Dissipation: 600 watts RoHS compliant* AEC-Q101 compliant** Applications ■ ■ ■ ■ ■ ■ Protection of power buses Protection of I/O interfaces Overvoltage transient protection Entertainment applications Comfort applications Telecom, computer, industrial and consumer electronics applications SMBJ-Q Transient Voltage Suppressor Diode Series General Information Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 220 V. Typical fast response times are less than 1.0 picosecond from 0 V to Breakdown Voltage. Additional Information Click these links for more information: PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. CONTACT Agency Recognition Description UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 600 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 100 Amps TJ -55 to +150 °C TSTG -55 to +150 °C Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Mounted on 5.0 mm2 (0.03 mm thick) copper pads to each terminal. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **”Q” part number suffix indicates AEC-Q101 compliance. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMBJ-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part No. Marking Bidirectional Device Part No. Breakdown Voltage VBR (Volts) Marking Min. Max. SMBJ5.0A-Q KEQ SMBJ5.0CA-Q AEQ 6.40 7.00 SMBJ6.0A-Q KGQ SMBJ6.0CA-Q AGQ 6.67 7.37 SMBJ6.5A-Q KKQ SMBJ6.5CA-Q AKQ 7.22 7.98 SMBJ7.0A-Q KMQ SMBJ7.0CA-Q AMQ 7.78 8.60 SMBJ7.5A-Q KPQ SMBJ7.5CA-Q APQ 8.33 9.21 SMBJ8.0A-Q KRQ SMBJ8.0CA-Q ARQ 8.89 9.83 SMBJ8.5A-Q KTQ SMBJ8.5CA-Q ATQ 9.44 10.4 SMBJ9.0A-Q KVQ SMBJ9.0CA-Q AVQ 10.0 11.1 SMBJ10A-Q KXQ SMBJ10CA-Q AXQ 11.1 12.3 SMBJ11A-Q KZQ SMBJ11CA-Q AZQ 12.2 13.5 SMBJ12A-Q LEQ SMBJ12CA-Q BEQ 13.3 14.7 SMBJ13A-Q LGQ SMBJ13CA-Q BGQ 14.4 15.9 SMBJ14A-Q LKQ SMBJ14CA-Q BKQ 15.6 17.2 SMBJ15A-Q LMQ SMBJ15CA-Q BMQ 16.7 18.5 SMBJ16A-Q LPQ SMBJ16CA-Q BPQ 17.8 19.7 SMBJ17A-Q LRQ SMBJ17CA-Q BRQ 18.9 20.9 SMBJ18A-Q LTQ SMBJ18CA-Q BTQ 20.0 22.1 SMBJ20A-Q LVQ SMBJ20CA-Q BVQ 22.2 24.5 SMBJ22A-Q LXQ SMBJ22CA-Q BXQ 24.4 26.9 SMBJ24A-Q LZQ SMBJ24CA-Q BZQ 26.7 29.5 SMBJ26A-Q MEQ SMBJ26CA-Q CEQ 28.9 31.9 SMBJ28A-Q MGQ SMBJ28CA-Q CGQ 31.1 34.4 SMBJ30A-Q MKQ SMBJ30CA-Q CKQ 33.3 36.8 SMBJ33A-Q MMQ SMBJ33CA-Q CMQ 36.7 40.6 SMBJ36A-Q MPQ SMBJ36CA-Q CPQ 40 44.2 SMBJ40A-Q MRQ SMBJ40CA-Q CRQ 44.4 49.1 SMBJ43A-Q MTQ SMBJ43CA-Q CTQ 47.8 52.8 SMBJ45A-Q MVQ SMBJ45CA-Q CVQ 50 55.3 SMBJ48A-Q MXQ SMBJ48CA-Q CXQ 53.3 58.9 SMBJ51A-Q MZQ SMBJ51CA-Q CZQ 56.7 62.7 SMBJ54A-Q NEQ SMBJ54CA-Q DEQ 60 66.3 SMBJ58A-Q NGQ SMBJ58CA-Q DGQ 64.4 71.2 SMBJ60A-Q NKQ SMBJ60CA-Q DKQ 66.7 73.7 SMBJ64A-Q NMQ SMBJ64CA-Q DMQ 71.1 78.6 SMBJ70A-Q NPQ SMBJ70CA-Q DPQ 77.8 86.0 SMBJ75A-Q NRQ SMBJ75CA-Q DRQ 83.3 92.1 SMBJ78A-Q NTQ SMBJ78CA-Q DTQ 86.7 95.8 SMBJ85A-Q NVQ SMBJ85CA-Q DVQ 94.4 104 SMBJ90A-Q NXQ SMBJ90CA-Q DXQ 100 111 SMBJ100A-Q NZQ SMBJ100CA-Q DZQ 111 123 SMBJ110A-Q PEQ SMBJ110CA-Q EEQ 122 135 SMBJ120A-Q PGQ SMBJ120CA-Q EGQ 133 147 SMBJ130A-Q PKQ SMBJ130CA-Q EKQ 144 159 SMBJ150A-Q PMQ SMBJ150CA-Q EMQ 167 185 SMBJ160A-Q PPQ SMBJ160CA-Q EPQ 178 197 SMBJ170A-Q PRQ SMBJ170CA-Q ERQ 189 209 SMBJ180A-Q PTQ SMBJ180CA-Q ETQ 201 222 SMBJ200A-Q PVQ SMBJ200CA-Q EVQ 224 247 SMBJ220A-Q PXQ SMBJ220CA-Q EXQ 246 272 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Maximum Maximum Maximum Maximum Working Maximum Clamping Peak Clamping Peak Peak Reverse Voltage Pulse Voltage Pulse Reverse Leakage @ Ipp Current @ Ipp Current Voltage @ VRWM (10/1000 μs) (10/1000 μs) (8/20 μs) (8/20 μs) @ IT (mA) VRWM (V) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 180 200 220 800 800 500 200 100 50 20 10 5.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 292 324 356 65.3 58.3 53.6 50.0 46.6 44.2 41.7 39.0 35.3 33.0 30.2 28.0 25.9 24.6 23.1 21.8 20.6 18.6 16.9 15.5 14.3 13.3 12.4 11.3 10.4 9.3 8.7 8.3 7.8 7.3 6.9 6.5 6.2 5.9 5.3 5.0 4.8 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 2.1 1.9 1.7 12.0 13.4 14.6 15.6 16.8 17.7 18.7 20.0 22.1 23.7 25.9 28.0 30.2 31.7 33.8 35.9 38.0 42.1 46.2 50.6 54.7 59.0 62.9 69.3 75.5 83.9 90.2 94.5 100.6 107.1 113.2 121.7 125.8 133.9 146.9 157.3 163.8 178.1 189.8 210.6 230.1 250.9 271.7 315.9 336.7 357.5 379.6 421.2 462.8 326.5 291.5 268.0 250.0 233.0 221.0 208.5 195.0 176.5 165.0 151.0 140.0 129.5 123.0 115.5 109.0 103.0 93.0 84.5 77.5 71.5 66.5 62.0 56.5 52.0 46.5 43.5 41.5 39.0 36.5 34.5 32.5 31.0 29.5 26.5 25.0 24.0 22.0 20.5 18.5 17.0 15.5 14.5 12.5 11.5 11.0 10.5 9.5 8.5 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMBJ-Q Transient Voltage Suppressor Diode Series Performance Graphs Maximum Non-Repetitive Surge Current 100 Peak Forward Surge Current (Amps) Peak Pulse Power Derating in Percent of Peak Power or Current Peak Pulse Power Derating Curve 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 120 100 80 60 40 0 0 25 0 75 50 100 125 Pulse Width 8.3 ms Single Half Sine-Wave 20 1 150 2 5 Ambient Temperature ( °C) Pulse Waveform 10000 50 100 Bidirectional v-0v Half value= CJ - Junction Capacitance (pF) Peak value (IRSM) 100 IP, Peak Pulse Current (%) 20 Typical Junction Capacitance TR=10 µs IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP 1000 Unidirectional v-0v Unidirectional @ VR 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 Bidirectional @ VR 1 0 0 1.0 2.0 3.0 1 4.0 10 Pulse Rating Curve 1000 Steady State Power Derating Curve 5.0 100 Steady State Power Dissipation (W) TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 5.0 mm Lead Areas 0.1 0.1 µs 100 VBR - Reverse Breakdown Voltage (V) T, Time (ms) PP, Peak Power (KW) 10 Number of Cycles at 60 Hz 4.0 3.0 2.0 1.0 0.0 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms 0 25 50 75 100 125 150 TL - Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMBJ-Q Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D B (Min.) E C (Min.) Dimension A B C D E F G H SMB (DO-214AA) 4.06 - 4.57 (0.160 - 0.180) 3.30 - 3.94 (0.130 - 0.155) 1.95 - 2.20 (0.077 - 0.087) 0.15 - 0.31 (0.006 - 0.012) 5.21 - 5.59 (0.205 - 0.220) 0.203 MAX. (0.008) 2.13 - 2.44 (0.084 - 0.096) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMB (DO-214AA) 2.69 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device How to Order SMBJ 12 CA - Q Package SMBJ = SMB/DO-214AA Working Peak Reverse Voltage 5 ~ 220 = 5 ~ 220 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device MM (INCHES) AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch Reel QH = AEC-Q101 Compliant, 7-inch Reel Typical Part Marking MANUFACTURER’S TRADEMARK YWW XXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMBJ-Q Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Unidirectional Product Orientation Trailer ....... ....... End C Leader Device ....... ....... ....... ....... ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA 481 standard specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- MM (INCHES) SMB (DO-214AA) 7-Inch Reel 13-Inch Reel 3.67 ± 0.20 (0.144 ± 0.008) 5.60 ± 0.20 (0.220 ± 0.008) 2.57 ± 0.20 (0.101 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 178 (7.008) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724) 500 3,000 REV. 10/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL