SMCJ22A-Q

AN T GRADE ** AE C- *R Q1 oH 01 S a CO nd M PL I AUTOMOTIVE Features ■ ■ ■ ■ ■ Applications Surface Mount SMC package Standoff Voltage: 5 to 120 volts Power Dissipation: 1500 watts RoHS compliant* AEC-Q101 compliant** ■ ■ ■ ■ ■ ■ Protection of power buses Protection of I/O interfaces Overvoltage transient protection Entertainment applications Comfort applications Telecom, computer, industrial and consumer electronics applications SMCJ-Q Transient Voltage Suppressor Diode Series General Information Additional Information Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 120 V. Typical fast response times are less than 1.0 picosecond from 0 V to Breakdown Voltage. Click these links for more information: PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. CONTACT Agency Recognition Description UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 1500 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 200 Amps TJ -55 to +150 °C TSTG -55 to +150 °C Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Mounted on 5.0 mm2 (0.03 mm thick) copper pads to each terminal. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. **”Q” part number suffix for automotive and other applications requiring appropriate AEC-Q101 compliance. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMCJ-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device NEW! NEW! Bidirectional Device Part No. Marking Part No. SMCJ5.0A-Q SMCJ6.0A-Q SMCJ6.5A-Q SMCJ7.0A-Q SMCJ7.5A-Q SMCJ8.0A-Q SMCJ8.5A-Q SMCJ9.0A-Q SMCJ10A-Q SMCJ11A-Q SMCJ12A-Q SMCJ13A-Q SMCJ14A-Q SMCJ15A-Q SMCJ16A-Q SMCJ17A-Q SMCJ18A-Q SMCJ20A-Q SMCJ22A-Q SMCJ24A-Q SMCJ26A-Q SMCJ28A-Q SMCJ30A-Q SMCJ33A-Q SMCJ36A-Q SMCJ40A-Q SMCJ43A-Q SMCJ45A-Q SMCJ48A-Q SMCJ51A-Q SMCJ54A-Q SMCJ58A-Q SMCJ60A-Q SMCJ64A-Q SMCJ70A-Q SMCJ75A-Q SMCJ78A-Q SMCJ85A-Q SMCJ90A-Q SMCJ100A-Q SMCJ110A-Q SMCJ120A-Q GDEQ GDGQ GDKQ GDMQ GDPQ GDRQ GDTQ GDVQ GDXQ GDZQ GEEQ GEGQ GEKQ GEMQ GEPQ GERQ GETQ GEVQ GEXQ GEZQ GFEQ GFGQ GFKQ GFMQ GFPQ GFRQ GFTQ GFVQ GFXQ GFZQ GGEQ GGGQ GGKQ GGMQ GGPQ GGRQ GGTQ GGVQ GGXQ GGZQ GHEQ GHGQ SMCJ5.0CA-Q SMCJ6.0CA-Q SMCJ6.5CA-Q SMCJ7.0CA-Q SMCJ7.5CA-Q SMCJ8.0CA-Q SMCJ8.5CA-Q SMCJ9.0CA-Q SMCJ10CA-Q SMCJ11CA-Q SMCJ12CA-Q SMCJ13CA-Q SMCJ14CA-Q SMCJ15CA-Q SMCJ16CA-Q SMCJ17CA-Q SMCJ18CA-Q SMCJ20CA-Q SMCJ22CA-Q SMCJ24CA-Q SMCJ26CA-Q SMCJ28CA-Q SMCJ30CA-Q SMCJ33CA-Q SMCJ36CA-Q SMCJ40CA-Q SMCJ43CA-Q SMCJ45CA-Q SMCJ48CA-Q SMCJ51CA-Q SMCJ54CA-Q SMCJ58CA-Q SMCJ60CA-Q SMCJ64CA-Q SMCJ70CA-Q SMCJ75CA-Q SMCJ78CA-Q SMCJ85CA-Q SMCJ90CA-Q SMCJ100CA-Q SMCJ110CA-Q SMCJ120CA-Q Breakdown Voltage VBR (Volts) @ IT Marking Min. Max. (mA) BDEQ BDGQ BDKQ BDMQ BDPQ BDRQ BDTQ BDVQ BDXQ BDZQ BEEQ BEGQ BEKQ BEMQ BEPQ BERQ BETQ BEVQ BEXQ BEZQ BFEQ BFGQ BFKQ BFMQ BFPQ BFRQ BFTQ BFVQ BFXQ BFZQ BGEQ BGGQ BGKQ BGMQ BGPQ BGRQ BGTQ BGVQ BGXQ BGZQ BHEQ BHGQ 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40 44.4 47.8 50 53.3 56.7 60 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100 111 122 133 7,00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104 111 123 135 147 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM (10/1000 μs) (10/1000 μs) (8/20 μs) (8/20 μs) VRWM (V) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) 5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 800 800 500 200 100 50 20 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 163 145.7 134 125 116.3 110.3 104.2 97.4 88.3 82.5 75.4 69.8 64.7 61.5 57.7 54.4 51.4 46.3 42.3 38.6 35.7 33.1 31 28.1 25.9 23.3 21.7 20.6 19.4 18.2 17.3 16.1 15.5 14.6 13.3 12.4 11.9 11 10.3 9.3 8.4 7.9 12.0 13.4 15.0 16.0 16.8 17.7 18.7 20.0 22.1 23.7 25.9 28.0 30.2 31.7 33.8 35.9 38.0 42.1 46.2 50.6 54.7 59.0 63 69.3 75.5 83.9 90.2 94.5 100.6 107.1 113.2 121.7 125.8 133.9 146.9 157.3 163.8 178 189.8 210.6 230.1 250.9 815.0 728.5 670.0 625.0 581.5 551.5 521.0 487.0 441.5 412.5 377.0 349.0 323.5 307.5 288.5 272.0 257.0 231.5 211.5 193.0 178.5 165.5 155 141.0 129.5 116.5 108.5 103.0 97.0 91.0 86.5 80.5 77.5 73.0 66.5 62.0 59.5 55 51.5 46.5 42.5 39.0 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMCJ-Q Transient Voltage Suppressor Diode Series Performance Graphs Maximum Non-Repetitive Surge Current 100 IFSM - Peak Forward Surge Current (Amps) Peak Pulse Power Derating in Percent of Peak Power or Current Peak Pulse Power Derating Curve 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 0 25 0 50 75 100 125 150 200 180 160 140 120 100 80 60 Pulse Width 8.3 ms Single Half Sine-Wave 40 20 0 10 1 Pulse Waveform Typical Junction Capacitance 100000 TR=10 µs IP, Peak Pulse Current (%) CJ - Junction Capacitance (pF) Peak value (IRSM) 100 IRSM Half value= 2 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP 0 0 1.0 2.0 3.0 Bidirectional v-0v 10000 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 100 1000 VBR - Reverse Breakdown Voltage (V) Steady State Power Derating Curve 6.5 6.0 5.5 Steady State Power Dissipation (W) TA = 25 °C PPPM - Peak Pulse Power (kW) 10 1 1000 Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 100 10 8.0 x 8.0 mm 0.31 x 0.31 inch Copper Pad Areas 1.0 µs Bidirectional @ VR 1 4.0 Pulse Rating Curve 0.1 0.1 µs Unidirectional v-0v Unidirectional @ VR 1000 T, Time (ms) 1 100 Number of Cycles at 60 Hz Ambient Temperature ( °C) 10 µs 100 µs Td, Pulse Width (Seconds) 1.0 ms 10 ms 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 150 TL - Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMCJ-Q Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D E B (Min.) C (Min.) Dimension A B C D E F G H SMC (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.90 - 3.20 (0.115 - 0.125) 0.15 - 0.31 (0.006 - 0.012) 7.75 - 8.13 (0.305 - 0.320) 0.203 MAX. (0.008) 2.00 - 2.62 (0.079 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device How to Order SMCJ 5 CA - Q Package SMCJ-Q = SMC/DO-214AB Working Peak Reverse Voltage 5 ~ 120 = 5 ~ 120 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device MM (INCHES) AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch Reel QH = AEC-Q101 Compliant, 7-inch Reel Typical Part Marking MANUFACTURER’S TRADEMARK YWW XXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMCJ-Q Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation C Device ....... ....... Leader ....... ....... ....... ....... 10 pitches (min.) W1 Start DIMENSIONS: 10 pitches (min.) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- MM (INCHES) SMC (DO-214AB) 7-Inch Reel 13-Inch Reel 6.0 ± 2.0 (0.236 - 0.079) 8.3 ± 0.20 (0.327 ± 0.008) 2.5 ± 0.20 (0.098 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 178 (7.008) 330 (12.992) 50.0 MIN. (1.969) 13.0 +0.50/-0.20 (0.512 +0.020/-0.008) 1.75 ± 0.10 (0.069 ± 0.004) 7.50 ± 0.10 (0.295 ± 0.004) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 0.30 ± 0.10 (0.012 ± 0.004) 16.00 ± 0.30 (0.630 ± 0.012) 22.4 MAX. (0.882) 500 3000 REV. 07/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL