SMLJ170CA

Features Applications ■ RoHS compliant* ■ IEC 61000-4-2 ESD (Min. Level 4) ■ Surface Mount SMC package ■ IEC 61000-4-4 EFT ■ Standoff Voltage: 5.0 to 170 volts ■ IEC 61000-4-5 Surge ■ Power Dissipation: 3000 watts ■ Typical temperature coefficient: ΔVBR = 0.1 % x VBR @ 25 °C x ΔT SMLJ Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ps for unidirectional devices and less than 5.0 ps for bidirectional devices from 0 V to Minimum Breakdown Voltage. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Agency Recognition Description Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) PPK 3000 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 300 Amps PM(AV) 5.0 Watts VF 3.5 5.0 Volts TJ -55 to +150 °C TSTG -55 to +150 °C Steady State Power Dissipation @ TL = 75 °C Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) SMLJ5.0A ~ SMLJ90A SMLJ100A ~ SMLJ170A Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order SMLJ 5.0 CA - H Package SMLJ = SMC/DO-214AB Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (blank) = 13 inch reel -H = 7 inch reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMLJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part Number Part Marking Bidirectional Device Part Number Part Marking Breakdown Voltage VBR (Volts) Min. @ IT Max. (mA) Working Maximum Maximum Peak Reverse Clamping Voltage Reverse Leakage @ Ipp Voltage @ VRWM VRWM (V) SMLJ5.0A HDE SMLJ5.0CA IDE 6.40 7.00 10 5 SMLJ6.0A HDG SMLJ6.0CA IDG 6.67 7.37 10 6 SMLJ6.5A HDK SMLJ6.5CA IDK 7.22 7.98 10 6.5 SMLJ7.0A HDM SMLJ7.0CA IDM 7.78 8.60 10 7 SMLJ7.5A HDP SMLJ7.5CA IDP 8.33 9.21 1 7.5 SMLJ8.0A HDR SMLJ8.0CA IDR 8.89 9.83 1 8 SMLJ8.5A HDT SMLJ8.5CA IDT 9.44 10.4 1 8.5 SMLJ9.0A HDV SMLJ9.0CA IDV 10.0 11.1 1 9 SMLJ10A HDX SMLJ10CA IDX 11.1 12.3 1 10 SMLJ11A HDZ SMLJ11CA IDZ 12.2 13.5 1 11 SMLJ12A HEE SMLJ12CA IEE 13.3 14.7 1 12 SMLJ13A HEG SMLJ13CA IEG 14.4 15.9 1 13 SMLJ14A HEK SMLJ14CA IEK 15.6 17.2 1 14 SMLJ15A HEM SMLJ15CA IEM 16.7 18.5 1 15 SMLJ16A HEP SMLJ16CA IEP 17.8 19.7 1 16 SMLJ17A HER SMLJ17CA IER 18.9 20.9 1 17 SMLJ18A HET SMLJ18CA IET 20.0 22.1 1 18 SMLJ20A HEV SMLJ20CA IEV 22.2 24.5 1 20 SMLJ22A HEX SMLJ22CA IEX 24.4 26.9 1 22 SMLJ24A HEZ SMLJ24CA IEZ 26.7 29.5 1 24 SMLJ26A HFE SMLJ26CA IFE 28.9 31.9 1 26 SMLJ28A HFG SMLJ28CA IFG 31.1 34.4 1 28 SMLJ30A HFK SMLJ30CA IFK 33.3 36.8 1 30 SMLJ33A HFM SMLJ33CA IFM 36.7 40.6 1 33 SMLJ36A HFP SMLJ36CA IFP 40 44.2 1 36 SMLJ40A HFR SMLJ40CA IFR 44.4 49.1 1 40 SMLJ43A HFT SMLJ43CA IFT 47.8 52.8 1 43 SMLJ45A HFV SMLJ45CA IFV 50 55.3 1 45 SMLJ48A HFX SMLJ48CA IFX 53.3 58.9 1 48 SMLJ51A HFZ SMLJ51CA IFZ 56.7 62.7 1 51 SMLJ54A HGE SMLJ54CA IGE 60 66.3 1 54 SMLJ58A HGG SMLJ58CA IGG 64.4 71.2 1 58 SMLJ60A HGK SMLJ60CA IGK 66.7 73.7 1 60 SMLJ64A HGM SMLJ64CA IGM 71.1 78.6 1 64 SMLJ70A HGP SMLJ70CA IGP 77.8 86.0 1 70 SMLJ75A HGR SMLJ75CA IGR 83.3 92.1 1 75 SMLJ78A HGT SMLJ78CA IGT 86.7 95.8 1 78 SMLJ85A HGV SMLJ85CA IGV 94.4 104 1 85 SMLJ90A HGX SMLJ90CA IGX 100 111 1 90 SMLJ100A HGZ SMLJ100CA IGZ 111 123 1 100 SMLJ110A HHE SMLJ110CA IHE 122 135 1 110 SMLJ120A HHG SMLJ120CA IHG 133 147 1 120 SMLJ130A HHH SMLJ130CA IHH 144 159 1 130 SMLJ150A HHM SMLJ150CA IHM 167 185 1 150 SMLJ160A HHP SMLJ160CA IHP 178 197 1 160 SMLJ170A HHR SMLJ170CA IHR 189 209 1 170 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Maximum Peak Pulse Current Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current (10/1000 μs) (10/1000 μs) (8/20 μs) (8/20 μs) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) 1000 1000 500 200 100 50 25 10 5 5 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 326.00 291.30 267.90 250.00 232.60 220.60 208.40 194.80 176.40 164.80 150.60 139.40 129.40 123.00 115.40 106.60 102.80 92.60 84.40 77.20 71.20 66.00 62.00 56.20 51.60 46.40 43.20 41.20 38.80 36.40 34.40 32.00 31.00 29.20 26.60 24.80 22.80 20.80 20.60 18.60 16.80 15.60 14.40 12.40 11.60 11.00 12.00 13.40 14.60 15.60 16.80 17.70 18.70 20.00 22.10 23.70 25.90 28.00 30.20 31.70 33.80 35.90 38.00 42.10 46.20 50.60 54.70 59.00 62.90 69.30 75.50 83.90 90.20 94.50 100.60 107.10 113.20 121.70 125.80 133.90 146.90 157.30 163.80 178.10 189.80 210.60 230.10 250.90 271.70 315.90 336.70 357.50 1630.50 1456.50 1339.50 1250.00 1163.00 1103.00 1041.50 974.00 882.50 824.00 754.00 697.50 646.50 615.00 577.00 543.50 513.50 463.00 422.50 385.50 356.50 330.50 310.00 281.50 258.00 232.50 216.00 206.50 194.00 182.00 172.00 160.50 155.00 145.50 132.50 124.00 119.00 109.50 102.50 92.50 84.50 77.50 72.00 61.50 58.00 54.50 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMLJ Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint a A B b C c G Dimension a (Max.) F H D b (Min.) E c (Min.) Dimension A B C D E F G H SMC (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.90 - 3.20 (0.114 - 0.126) 0.15 - 0.31 (0.006 - 0.012) 7.75 - 8.13 (0.305 - 0.320) 0.05 - 0.20 (0.002 - 0.008) 2.00 - 2.62 (0.079 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMLJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 300 Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 250 200 150 100 0 0 25 0 50 75 100 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 50 125 150 175 1 200 2 5 Junction Temperature (°C) Pulse Waveform 20 50 100000 Peak value (IRSM) Half value= TA= 25 °C 10000 IRSM 2 CJ - Junction Capacitance (pF) 100 100 Typical Junction Capacitance TR=10 µs IP, Peak Pulse Current (%) 10 Number of Cycles at 60 Hz Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP Bidirectional 1000 Unidirectional 100 10 0 0 1.0 2.0 3.0 1 4.0 1000 Steady State Power Derating Curve 5.0 TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 8.0 mm Lead Areas 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) 100 PP, Peak Power (KW) 100 VBR - Reverse Breakdown Voltage (V) Pulse Rating Curve 0.1 0.1 µs 10 1 T, Time (ms) 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SMLJ Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation C Device ....... ....... ....... ....... Leader ....... ....... 10 pitches (min.) W1 Start DIMENSIONS: 10 pitches (min.) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item Symbol 7 Inch Reel Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- MM (INCHES) 178 (7.008) 500 SMC (DO-214AB) 13 Inch Reel 6.0 ± 2.0 (0.236 - 0.079) 8.3 ± 0.20 (0.327 ± 0.008) 2.5 ± 0.20 (0.098 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 330 (12.992) 50.0 MIN. (1.969) 13.0 +0.50/-0.20 (0.512 +0.020/-0.008) 1.75 ± 0.10 (0.069 ± 0.004) 7.50 ± 0.10 (0.295 ± 0.004) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 0.30 ± 0.10 (0.012 ± 0.004) 16.00 ± 0.30 (0.630 ± 0.012) 22.4 MAX. (0.882) 3,000 REV. 02/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL