SRF0602-221Y

T PL IA N M CO Features Applications ■ Current rating of 300 mA ■ EMI suppression *R oH S ■ Inductance range: 10 to 330 μH ■ Frequency range to 1600 MHz ■ RoHS compliant* SRF0602 Series - Line Filter Electrical Specifications @ 25 °C Part Number L (μH) * Leakage Inductance (μH) Max. General Specifications DCR (Ω) max. (each winding) Impedance (Z) Rated Current (mA) Freq. Range (MHz) Min. Value (Ω) SRF0602-100Y 10 ± 50 % 1 0.24 300 35 - 570 600 SRF0602-470Y 47 ± 50 % 4 0.16 300 4 - 1600 140 SRF0602-820Y 82 ± 50 % 4 0.02 300 3 - 850 220 SRF0602-101Y 100 ± 50 % 8 0.22 300 3 - 660 260 SRF0602-181Y 180 ± 50 % 8 0.25 300 3 - 250 500 SRF0602-221Y 220 ± 50 % 10 0.28 300 3 - 210 600 SRF0602-331Y 330 ± 50 % 10 0.30 300 3 - 120 900 * Test condition: 2 mV, 10 KHz Typical Part Marking Schematic N2 1 4 Product Dimensions 331 3 Materials Core Material ................................Ferrite Base ................................................ LCP Wire ............................Enameled copper Terminal coating .................................Sn Packaging ....... 1000 pcs. per 7-inch reel 331 2 Temperature Rise.. 20 °C at rated current Rated Voltage ..............................50 Vdc Hi-Pot ............................ 250 VAC, 60 Hz, 3 mA max. for 1 minute Operating Temperature ................................. -40 °C to +105 °C (Temperature rise included) Storage Temperature .. -40 °C to +105 °C Solderability ................. 260 °C for 5 sec. (JEDEC J-STD-020D) N1 3.60 ± 0.15 (.142 ± .006) How to Order SRF0602 - 101 Y Recommended Layout 6.50 MAX. (.256) Model Value Code (see table) Tolerance Code Y = ±50 % 1.0 (.039) 1.0 (.039) 2.5 (.098) 0.90 (.035) MIN. 1.65 ± 0.15 (.065 ± .006) 2.50 ± 0.10 (.098 ± .004) 6.6 (.260) MAX. 0.80 (.031) 2 3 1.5 (.059) Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com 1 4 3.40 ± 0.20 (.134 ± .008) 0.55 ± 0.10 (.022 ± .004) DIMENSIONS: WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf MM (INCHES) SRF0602 Series - Line Filter Impedance Graph 10000 331Y 100Y Z (Ohms) Typical 221Y 1000 181Y 101Y 820Y 470Y 100 10 0.1 1 10 100 1000 Frequency (MHz) Packaging Specifications 178 DIA. (7.01) 2.0 ± 0.5 (.079 ± .020) 18.4 (1.97) 13.0 (.512) DIA. 21.0 ± 0.8 (.827 ± .031) 50.0 -0 (1.97 -0) 13.0 DIA. (.512) 14 +0 (.551 +0) 12.0 (.472) 8.0 (.315) END 331 NO COMPONENT 4.0 (.157) 331 331 331 331 331 START 331 331 COMPONENTS NO COMPONENT 400 (15.75) 200 (7.87) USER DIRECTION OF FEED QTY: 1000 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 06/13 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL