SRF2012A-801Y

*R oH ** S C HA O LO MP GE LIA N NT FR a EE nd Features ■ Shielded construction – low radiation ■ Bifilar wound ■ Use with Chip LAN transformers SM453229-231N7Y and SM453229-381N7Y ■ AEC-Q200 compliant ■ RoHS compliant* and halogen free** SRF2012A Series - Common Mode Chip Inductors Electrical Specifications at 25 °C Impedance @ 100 MHz / 1 V Part Number (Ω) Tolerance (%) SRF2012A-801Y 800 ± 25 General Specifications Rated Voltage (VDC) Max. Withstand Voltage (VDC) Max. Insulation Resistance (Ω) Min. DCR Max. (Ω) Irms (mA) 100 250 10 M 0.88 300 Soldering Profile PRE-HEATING NATURAL COOLING SOLDERING Materials TP (260 °C / 10 seconds max.) Core ..............................................Ferrite Wire ............................Enameled copper Terminal Finish ...................................Sn Packaging ....... 2000 pcs. per 7-inch reel tp (245 °C / 20~40 seconds) Temperature (°C) Max. Rated Voltage ................. 100 VDC Max. Withstanding Voltage ...... 250 VDC Insulation Resistance ...................10 MΩ (Min.) @ 100 VDC Operating Temperature ................................-55 °C to +125 °C (Temperature rise included) Storage Temperature ................................-55 °C to +125 °C Temperature Rise .....20 °C at rated Irms 217 200 60 ~ 150 seconds 150 Product Dimensions 60 ~ 180 seconds 25 2.0 ± 0.20 (.079 ± .008) 480 seconds max. Time (Seconds) REFLOW TIMES: 3 MAX. Schematic 1 4 0.15 ± 0.10 (.006 ± .004) Recommended Layout 2 3 1 2 4 1.25 (.049) 3 2 4 3 0.51 ± 0.10 (.020 ± .004) 1.40 (.055) 0.45 (.018) 2.60 (.102) DIMENSIONS: 1 MM (INCHES) 0.50 ± 0.10 (.020 ± .004) 0.51 ± 0.10 (.020 ± .004) 0.50 ± 0.10 (.020 ± .004) 1.20 ± 0.20 (.047 ± .008) 1.20 ± 0.20 (.047 ± .008) DIMENSIONS: WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. MM (INCHES) SRF2012A-801Y - Common Mode Chip Inductors Typical Impedance vs. Frequency Curves Impedance (Ohms) 10000 Common Mode 1000 100 10 Normal Mode 1 0.1 1 10 100 1000 10000 Frequency (MHz) Packaging Specifications 9.0 ± 0.5 (.354 ± .020) 13.5 ± 0.5 (.531 ± .020) DIA. 13.5 ± 0.5 DIA. (.531 ± .020) 60 ± 2.0 (2.362 ± .079) 1.9 R (.075) 178 ± 2.0 (7.008 ± .079) 2.0 (.079) 10.5 (.413) 0.5 R (.020) R 120 ° 2.00 ± 0.05 (.079 ± .002) 4.00 ± 0.1 (.157 ± .004) 1.75 ± 0.10 (.069 ± .004) A 1.50 + 0.10 DIA. (.059 + .004) 0.28 ± 0.05 (.011 ± .002) 8.00 ± 0.10 (.315 ± .004) 3.50 ± 0.05 (.138 ± .002) 2.35 ± 0.10 (.093 ± .004) 4.00 ± 0.10 (.157 ± .004) A 1.50 ± 0.10 (.059 ± .004) USER DIRECTION OF FEED QTY: 2000 PCS. PER REEL 1.45 ± 0.10 (.057 ± .004) SECTION A-A DIMENSIONS: MM (INCHES) REV. 11/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL