SRF3216A-601Y

CO LO & MP LI GE AN N T FR EE Features Applications ■ Shielded construction – low radiation ■ EMI suppression for: *R oH S ■ Bifilar wound ** HA ■ Impedance range: 90 to 2200 ohms @ 100 MHz ■ AEC-Q200 qualified ■ RoHS compliant* and halogen free** - Data and signal lines CANbus Automotive electronics Consumer electronics Telecom devices SRF3216A Series - Common Mode Chip Inductors Electrical Specifications @ 25 °C General Specifications Impedance @ 100 MHz / 1 V Bourns Part Number Z (Ω) Tolerance (%) DCR Typ. (Ω) DCR Max. (Ω) Irms (mA) SRF3216A-900Y 90 ± 25 0.15 0.3 400 SRF3216A-121Y 120 ± 25 0.17 0.3 350 SRF3216A-161Y 160 ± 25 0.18 0.4 350 SRF3216A-221Y 220 ± 25 0.25 0.45 300 SRF3216A-261Y 260 ± 25 0.35 0.5 300 SRF3216A-361Y 360 ± 25 0.45 0.6 300 SRF3216A-601Y 600 ± 25 0.60 0.8 300 SRF3216A-102Y 1000 ± 25 0.65 1.0 230 SRF3216A-222Y 2200 ± 25 1.10 1.2 200 Soldering Profile Rated Voltage ............................ 50 VDC Withstanding Voltage ............... 125 VDC Insulation Resistance ........... 10 megohms min. @ 100 VDC Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature ................................-40 °C to +125 °C Temperature Rise .....20 °C at rated Irms Materials Core ..............................................Ferrite Wire ............................Enameled copper Terminal Finish ...................................Sn Packaging ....... 2000 pcs. per 7-inch reel Product Dimensions Peak Temperature260 ഒ max. Max. Peak Temperature 260 ഒ10 sec. max. Max. Time Above 217 ഒ: 60~150 sec. max. Preheating Soldering 3.2 ± 0.2 (.126 ± .008) Natural Cooling TP (260 °C / 10 Sec. Max.) Temperature (°C) tp (245 °C, 20~40 Sec.) 200 °C 150°C 0.15 ± 0.1 (.006 ± .039) 217 °C 2.0 ± 0.2 (.079 ± .008) 60~150 Sec. 60~180 Sec. 1.6 ± 0.2 (.063 ± .008) 480 Sec. Max. 25 1 Time (Seconds) How to Order 2 0.5 ± 0.1 (.020 ± .004) 3 0.5 ± 0.1 (.020 ± .004) Reflow Times: 3 Times Max. Schematic SRF3216A - 221 Y 1 2 Model 4 0.5 ± 0.1 (.020 ± .004) 0.5 ± 0.1 (.020 ± .004) Value Code (see table) Recommended Layout Tolerance Code 4 Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 EMEA: Tel: +36 88 520 390 • Fax: +36 88 520 211 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com 3 4 3 1.6 (.063) 1 1.9 (.075) 3.7 2 * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. (.146) **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine MM (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. DIMENSIONS: (INCHES) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 0.4 (.016) SRF3216A Series - Common Mode Chip Inductors Typical Impedance vs. Frequency Curves SRF3216A - 121Y SRF3216A - 900Y 1000 1000 COMMON MODE 10 NORMAL MODE 1 0.1 1 10 COMMON MODE 100 IMPEDANCE (Ω) IMPEDANCE (Ω) 100 100 1000 10 NORMAL MODE 1 0.1 10000 1 10 FREQUENCY (MHz) SRF3216A - 161Y SRF3216A - 221Y COMMON MODE 10 NORMAL MODE 1 1 10 COMMON MODE 100 IMPEDANCE (Ω) IMPEDANCE (Ω) 10000 1000 100 100 1000 10 NORMAL MODE 1 0.1 10000 1 10 FREQUENCY (MHz) 10000 10000 1000 IMPEDANCE (Ω) COMMON MODE 100 10 NORMAL MODE 1 0.1 1000 SRF3216A - 361Y SRF3216A - 261Y 1000 100 FREQUENCY (MHz) 10000 IMPEDANCE (Ω) 1000 FREQUENCY (MHz) 1000 0.1 100 COMMON MODE 100 10 NORMAL MODE 1 1 10 100 FREQUENCY (MHz) 1000 10000 0.1 1 10 100 1000 10000 FREQUENCY (MHz) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. SRF0504 Series - Line Filter Mode Chip Inductors SRF3216A Series - Common Typical Impedance vs. Frequency Curves (Continued) SRF3216A - 601Y SRF3216A - 102Y 10000 10000 COMMON MODE COMMON MODE 1000 IMPEDANCE (Ω) IMPEDANCE (Ω) 1000 100 10 NORMAL MODE 100 NORMAL MODE 10 1 0.1 1 10 100 1000 10000 1 1 10 100 FREQUENCY (MHz) FREQUENCY (MHz) SRF3216A - 222Y 10000 COMMON MODE IMPEDANCE (Ω) 1000 100 NORMAL MODE 10 1 1 10 100 1000 10000 FREQUENCY (MHz) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 1000 10000 SRF3216A Series - Common Mode Chip Inductors Packaging Specifications 13.5 ± 0.5 (.531 ± .020) DIA. 60 ± 2.0 (2.362 ± .079) DIA. 2.0 ± 0.5 (.079 ± .020) 1.9 R (.075) 120 ° 178.0 ± 2.0 (7.008 ± .079) 9.0 ± 0.5 (.354 ± .020) 2.0 ± 0.05 (.079 ± .002) 1.75 ± 0.1 (.069 ± .004) 3.5 ± 0.5 (.138 ± .020) 10.5 R (.413) DIMENSIONS: 0.5 (.020) R MM (INCHES) 4.0 ± 0.1 (.157 ± .004) DIA. 1.5 ± 0.1 (.059 ± .004) 0.22 ± 0.05 (.009 ± .002) A 8.0 ± 0.1 (.315 ± .004) 3.50 ± 0.1 (.138 ± .004) 3.5 ± 0.05 (.138 ± .002) 4.0 ± 0.1 (.157 ± .004) A DIA. 1.1 ± 0.1 (.043 ± .004) 2.10 ± 0.1 (.083 ± .004) 1.88 ± 0.1 (.074 ± .004) USER DIRECTION OF FEED QTY: 2000 PCS. PER REEL 08/15 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.