SRN3015TA-1R5Y

*R AE **H oHS C- AL C Q2 OG OM 00 EN PL CO F IA M RE NT, PL E & IA NT Features ■ Semi-shielded construction ■ Inductance range: 1 to 47 µH ■ Rated current up to 2.2 A ■ AEC-Q200 compliant ■ RoHS compliant* and halogen free** SRN3015TA Series - Semi-shielded Power Inductors Inductance @ 100 kHz / 0.1 V Bourns Part No. SRN3015TA-1R0Y SRN3015TA-1R5Y SRN3015TA-2R2M SRN3015TA-3R3M SRN3015TA-4R7M SRN3015TA-6R8M SRN3015TA-100M SRN3015TA-150M SRN3015TA-180M SRN3015TA-220M SRN3015TA-330M SRN3015TA-470M L (μH) 1.0 1.5 2.2 3.3 4.7 6.8 10 15 18 22 33 47 Tol. % ±30 ±30 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 ±20 Q (Min.) @ 100 kHz 12 12 12 12 12 12 12 12 12 12 12 12 SRF (MHz) Typ. 100 87 64 49 40 36 28 23 21 20 18 17 DCR (Ω) ±20 % 0.03 0.04 0.06 0.08 0.12 0.16 0.22 0.32 0.41 0.46 0.8 1.2 Irms (A) 2.2 2 1.7 1.4 1.2 1 0.8 0.7 0.65 0.6 0.45 0.4 Isat (A) 2.2 2 1.7 1.4 1.2 1 0.75 0.65 0.6 0.55 0.4 0.35 Operating Temperature ................................. -40 °C to +125 °C (Temperature rise included) Storage Temperature .. -40 °C to +125 °C Temperature Rise .....40 °C at rated Irms Rated Current ............ Inductance drops 30 % at Isat Failure In Time (FIT) ........24.7/109 hours Mean Time Between Failures (MTBF) .................................. 40.4 x 106 hours Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core ..............................................Ferrite Wire ............................Enameled copper Terminal Finish ...................................Sn Coating .................Magnetic epoxy resin Packaging ....... 2000 pcs. per 7-inch reel Product Dimensions Preheating Soldering 3.0 ± 0.2 (.118 ± .008) Natural Cooling TP (260 °C, 10 Sec. Max.) 3.0 ± 0.2 (.118 ± .008) Temperature (°C) tp (245 °C, 20~40 Sec.) 200 °C 150°C 217 °C 60~150 Sec. 60~180 Sec. 480 Sec. Max. REF. 1.0 (.039) 25 Time (Seconds) Electrical Schematic REF. REF. 1.0 (.039) 1.0 (.039) How to Order 1.5 MAX. (.059) SRN3015TA - 100M Model Value Code (see table) Recommended Layout 3.2 REF. (.126) 3.2 (.126) REF. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf REF. 1.0 (.039) DIMENSIONS: MM (INCHES) SRF0504 Series - Line Filter SRN3015TA Series - Semi-shielded Power Inductors Inductance vs. Current 1.0 0.5 Inductance (μH) 2.0 1.5 Inductance (μH) Inductance (μH) 4 2.5 1.5 1.0 0.5 0 0.5 1.0 1.5 2.0 0 2.5 0.5 SRN3015TA-3R3M 1 1.0 1.5 0 2.0 4.5 6 9 1.5 0 Inductance (μH) 12 3.0 4 2 0.6 0.9 1.2 1.5 0 0.3 DC Current(A) 0.6 0.9 1.2 0 1.5 5 0.4 0.6 0.8 32 20 24 15 10 5 0.2 SRN3015TA-220M 0.4 0.6 0.8 0 1.0 60 Inductance (μH) 45 Inductance (μH) 30 30 15 0.30 DC Current(A) 0.45 0.50 0.6 0.8 40 20 0 0 0.15 0.4 SRN3015TA-470M SRN3015TA-330M 80 0 0.2 DC Current(A) 60 0 1.0 8 40 10 0.8 16 DC Current(A) DC Current(A) 20 0.6 0 0 1.0 0.4 SRN3015TA-180M 25 0 0 0.2 0.2 DC Current(A) Inductance (μH) Inductance (μH) 10 0 3 SRN3015TA-150M SRN3015TA-100M 15 2.0 6 DC Current(A) 20 1.5 0 0 0.3 1.0 SRN3015TA-6R8M SRN3015TA-4R7M 8 0 0.5 DC Current(A) 6.0 Inductance (μH) Inductance (μH) 2 DC Current(A) DC Current(A) Inductance (μH) 3 0 0 0 Inductance (μH) SRN3015TA-2R2M SRN3015TA-1R5Y SRN3015TA-1R0Y 2.0 0 0.1 0.2 0.3 DC Current(A) 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5 DC Current(A) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SRF0504 Series - Line Filter SRN3015TA Series - Semi-shielded Power Inductors 8.4 ± 1.0 (.331 ± .004) 4.0 ± 0.1 (.157 ± .004) 2.0 ± 0.05 (.079 ± .002) 3.2 ± 0.05 (.126 ± .002) 13.0 ± 0.8 (.512 ± .031) 8.0 ± 0.1 (.315 ± .004) 50.0 (1.969) MIN. 1.7 ± 0.2 (.067 ± .008) 4.0 ± 0.05 (.157 ± .002) 178 ± 2.0 (7.008 ± .079) DIMENSIONS: 0.23 ± 0.05 (.009 ± .002) 3.2 ± 0.05 (.126 ± .002) MM (INCHES) USER DIRECTION OF FEED QTY: 2000 PCS. PER REEL Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 11/17 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL