SRR0805-330Y

T PL IA N M CO *R oH S Features Applications ■ Available in E12 series ■ Input/output of DC/DC converters ■ Low profile - 4.7 mm unit height ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs ■ High current LE AD FR EE ■ RoHS compliant* µH 2.2 3.9 5.6 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 470 560 680 820 1000 Q Tol. % Ref. ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 15 ± 15 ± 15 ± 15 ± 15 ± 15 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 18 20 20 19 40 40 40 40 38 35 40 35 32 30 28 28 45 42 39 41 38 37 36 34 32 32 35 35 Test Frequency (MHz) SRF Min. (MHz) 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.252M 75.0 50.0 40.0 32.0 28.0 24.0 22.0 19.0 19.0 15.5 13.5 12.0 10.5 9.5 9.0 8.5 7.5 7.0 6.5 4.8 4.5 4.2 3.8 3.5 3.0 2.8 2.5 2.2 RDC Max. (Ω) 0.040 0.055 0.065 0.080 0.100 0.120 0.140 0.160 0.180 0.200 0.240 0.260 0.280 0.380 0.440 0.550 0.600 0.750 0.90 1.05 1.18 1.40 1.80 2.25 3.00 3.40 4.00 5.00 I rms Max. (A) I sat Typ. (A) 2.50 2.10 1.95 1.75 1.50 1.40 1.30 1.20 1.10 1.00 0.92 0.84 0.75 0.68 0.60 0.54 0.50 0.45 0.40 0.35 0.30 0.27 0.24 0.20 0.18 0.17 0.16 0.15 4.90 3.70 3.20 2.50 2.20 2.10 1.80 1.70 1.50 1.40 1.20 1.10 1.00 0.95 0.90 0.74 0.70 0.66 0.64 0.62 0.55 0.45 0.38 0.35 0.34 0.32 0.29 0.24 **KFactor 202 159 132 104 92 87 78 70 62 57 51 48 43 40 36 33 30 27 24 22 20 18 17 14 12 11 10 9 Δ I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot. Core Loss vs. Flux Density Test Voltage .......................................1 V .. 250 °C, 10 sec. max. (In compliance with JEDEC, J-STD-020C, Table 4-2) Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature .. -40 °C to +125 °C Resistance to Soldering Heat .......................... 260 °C, 10 sec. max. Moisture Sensitivity Level .....................1 ................. N/A Materials Core ............................... Ferrite DR & RI Wire ............................Enameled copper Base .....................................LCP E4008 Terminal ....................................Cu/Ni/Sn Rated Current ...............Ind. drop of 10 % typ. at Isat Temperature Rise .....................40 °C max. at rated Irms Packaging .................. 1000 pcs. per reel Product Dimensions 101 101 SRR0805 -2R2M SRR0805 -3R9M SRR0805 -5R6M SRR0805 -8R2M SRR0805 -100M SRR0805 -120M SRR0805 -150M SRR0805 -180Y SRR0805 -220Y SRR0805 -270Y SRR0805 -330Y SRR0805 -390Y SRR0805 -470Y SRR0805 -560K SRR0805 -680K SRR0805 -820K SRR0805 -101K SRR0805 -121K SRR0805 -151K SRR0805 -181K SRR0805 -221K SRR0805 -271K SRR0805 -331K SRR0805 -471K SRR0805 -561K SRR0805 -681K SRR0805 -821K SRR0805 -102K Inductance 1 KHz Ro VE LEA HS RS D CO ION FRE M SA E PL R IA E NT * Bourns Part No. SRR0805 Series - Shielded Power Inductors 8.0 ± 0.2 (.315 ± .008) 8.0 ± 0.2 (.315 ± .008) 4.7 MAX. (.185) 4.7 MAX. (.185) 10.5 ± 0.3 (.413 ± .012) 10.5 ± 0.3 (.413 ± .012) 1000 Core Loss (mW) 100 1 MHz 800 KHz 500 KHz 400 KHz 300 KHz 200 KHz 100 KHz 10 1 2.1 TYP. (.082) 2.1 TYP. (.082) 2.0 TYP. (.079) 2.0 TYP. (.079) Recommended Layout 0.10 0.01 6.0 (.236) 6.0 TYP. (.236) TYP. 10 100 1000 2.2 (.086) 2.2 (.086) 5.7 (.224) 5.7 (.224) Flux Density Bp-p (gauss) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 2.5 (.099) 2.5 (.099) MM DIMENSIONS: (INCHES) SRR0805 Series - Shielded Power Inductors Schematic Soldering Profile 275 Max. of 10 seconds at 250 °C 250 °C 225 217 °C 60-150 seconds 190 °C Ramp down 6 °/second maximum Temperature (°C) 175 125 120 - 150 seconds 10 seconds min. 75 Ramp up 3 °/second maximum 0 0 50 100 150 200 250 300 Time (seconds) 330 DIA. (12.99) 2.0 ± 0.5 (.079 ± .020) 22.4 (.882) 13.0 ± 0.5 (.512 ± .020) DIA. 21 ± .8 (.827 ± .031) 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) 18 (.709) 4 (.157) END START 16 (.630) 4.8 (.189) DIMENSIONS: MM (INCHES) 12 (.472) NO COMPONENT COMPONENTS NO COMPONENT 200 (7.874) 11200 (440.945) 400 (15.748) USER DIRECTION OF FEED QTY: 1000 PCS. PER REEL REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL