SRR0906-8R2ML

PL IA Features ■ Available in E6 series ■ High inductance up to 10 mH ■ Low 6.0 mm profile ■ Gull wing leads ■ RoHS compliant* Applications ■ Input/output of DC/DC converters ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs • Car radios *R oH S CO M NT SRR0906 Series - SMD Shielded Power Inductors Electrical Specifications Inductance 1kHz Bourns Part No. (µH) Tol. % Q Ref. Test Frequency (MHz) SRF Min. (MHz) RDC (Ω) I rms Max. (A) I sat Typ. (A) SRR0906-2R7ML SRR0906-3R5ML SRR0906-4R7ML SRR0906-5R6ML SRR0906-6R8ML SRR0906-8R2ML SRR0906-100ML SRR0906-120ML SRR0906-150ML SRR0906-180ML SRR0906-220ML SRR0906-270ML SRR0906-330ML SRR0906-390ML SRR0906-470ML SRR0906-560ML SRR0906-680ML SRR0906-820ML SRR0906-101YL SRR0906-121YL SRR0906-151YL SRR0906-181YL SRR0906-221YL SRR0906-271YL SRR0906-331YL SRR0906-391YL SRR0906-471YL SRR0906-561YL SRR0906-681YL SRR0906-821YL SRR0906-102YL SRR0906-122YL SRR0906-152YL SRR0906-182YL SRR0906-222YL SRR0906-272YL SRR0906-332YL SRR0906-392YL SRR0906-472YL SRR0906-562YL SRR0906-682YL SRR0906-822YL SRR0906-103YL 2.7 3.5 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ± 20 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 ±15 23 23 23 23 23 23 35 35 35 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 60 60 85 100 100 100 100 100 100 100 100 100 100 100 100 100 7.96M 7.96M 7.96M 7.96M 7.96M 7.96M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 2.52M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.796M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.252M 0.0796M 85.0 80.0 40.0 57.0 38.0 30.0 29.0 26.0 23.0 22.0 19.0 17.0 15.0 14.0 12.0 12.0 9.0 8.0 7.5 7.0 6.0 5.5 5.0 5.0 4.5 4.2 4.0 3.2 2.7 2.6 2.3 2.3 2.0 1.7 1.5 1.4 1.3 1.2 1.0 0.9 0.9 0.8 0.7 0.032 0.036 0.040 0.046 0.050 0.055 0.080 0.085 0.100 0.110 0.130 0.140 0.150 0.160 0.180 0.300 0.350 0.370 0.420 0.480 0.550 0.820 1.000 1.100 1.300 1.400 1.600 2.700 3.200 3.500 4.000 4.400 5.200 7.000 8.500 9.200 11.000 16.000 19.000 21.000 24.000 31.000 38.000 3.20 2.90 2.70 2.50 2.30 2.10 1.80 1.70 1.60 1.50 1.40 1.30 1.20 1.10 1.00 0.93 0.85 0.78 0.70 0.65 0.60 0.52 0.48 0.44 0.40 0.38 0.35 0.28 0.25 0.23 0.22 0.20 0.18 0.17 0.16 0.14 0.12 0.11 0.10 0.09 0.09 0.08 0.07 5.80 5.20 4.30 4.20 3.40 3.20 2.70 2.60 2.40 2.00 1.90 1.80 1.60 1.40 1.30 1.20 1.00 0.90 0.90 0.75 0.70 0.70 0.60 0.55 0.51 0.50 0.40 0.35 0.33 0.30 0.26 0.24 0.22 0.20 0.18 0.17 0.15 0.13 0.11 0.11 0.10 0.09 0.08 General Specifications Test Voltage........................................1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temperature .-40 °C to +125 °C (Temperature rise included) Storage Temperature..-40 °C to +125 °C Resistance to Soldering Heat ..................................260 °C for 5 sec. Materials Core.....................Ferrite DR and RI core Wire .............................Enameled copper Base..................................................LCP Terminal ....................................Cu/Ni/Sn Adhesive ..............................Epoxy resin Rated Current .Ind. drop 10 % typ. at Isat Temperature Rise .........................40 °C max. at rated Irms Packaging.....................600 pcs. per reel Product Dimensions START 1 8 MARKING (PIN 1 SIDE) FINISH 4 101 5 10.5 (.413) 9.5 ± 0.3 (.374 ± .012) 12.5 ± 0.5 (.492 ± .020) 6.0 ± 0.3 (.236 ± .012) 11.0 ± 0.5 (.433 ± .020) 2.5 ± 0.3 (.098 ± .012) 2.5 ± 0.3 0.7 ± 0.1 (.028 ± .004) (.098 ± .012) 3.0 (.118) 2.5 ± 0.3 (.098 ± .012) Recommended Layout 2.2 (.087) 10.3 (.406) 2.2 (.087) 2.5 (.098) Multiple windings possible (up to four windings). Electrical Schematic 1 4 1.0 (.039) DIMENSIONS: MM (INCHES) 14.7 (.578) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. SRR0906 Series - Shielded Power Inductors Packaging Specifications 330 DIA. (12.99) 2.0 ± 0.5 (.079 ± .020) 22.4 (.882) 13.0 ± 0.5 (.512 ± .020) DIA. 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) 18 (.709) THICKNESS 0.10 (.004) MAX. EMBOSSED CAVITY 21 ± .8 (.827 ± .031) EMBOSSED CARRIER DIMENSIONS: MM (INCHES) END 4 (.157) START 24 (.945) 6.85 (.27) 16 (.63) NO COMPONENT COMPONENTS NO COMPONENT 200 (7.874) 9600 (378.2) 400 (15.748) USER DIRECTION OF FEED QTY: 600 PCS. PER REEL REV. 05/05 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.