SRR4018-150Y

T PL IA N M CO *R oH S Features Applications ■ Height of 2.0 mm ■ Input/output of DC/DC converters ■ Current rating up to 2.7 A ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs ■ RoHS compliant* SRR4018 Series - Shielded SMD Power Inductors Electrical Characteristics Inductance 100 kHz Bourns Part Number (μH) SRR4018-1R0Y SRR4018-1R8Y SRR4018-2R2Y SRR4018-2R7Y SRR4018-3R3Y SRR4018-3R9Y SRR4018-4R7Y SRR4018-5R6Y SRR4018-6R8Y SRR4018-8R2Y SRR4018-100Y SRR4018-120Y SRR4018-150Y SRR4018-180Y SRR4018-220Y SRR4018-270Y SRR4018-330Y SRR4018-390Y SRR4018-470Y SRR4018-560Y SRR4018-680Y SRR4018-820Y SRR4018-101Y SRR4018-121Y SRR4018-151Y SRR4018-181Y 1.0 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 Tol. % Q Ref. Test Frequency (MHz) SRF Typ. (MHz) DCR Max. (mΩ) I rms (A) I sat (A) ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 9 9 8 8 8 8 8 7 8 7 10 9 8 7 7 7 7 8 8 8 7 8 10 11 14 10 7.960 7.960 7.960 7.960 7.960 7.960 7.960 7.960 7.960 7.960 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 2.520 0.796 0.796 0.796 0.796 219 105 90 78 61 60 55 57 49 40 38 32 30 30 29 23 21 19 20 15 13 13 12 10 10 10 35 58 55 60 65 75 82 90 100 135 150 170 220 280 300 370 420 540 600 820 860 1200 1350 1950 2600 4000 2.70 2.35 2.10 2.03 1.95 1.82 1.72 1.64 1.50 1.40 1.30 1.15 1.03 0.92 0.88 0.77 0.73 0.64 0.62 0.52 0.50 0.43 0.40 0.33 0.28 0.18 2.60 2.20 2.10 1.95 1.80 1.65 1.50 1.25 1.15 1.10 1.00 0.90 0.82 0.75 0.65 0.60 0.50 0.48 0.45 0.40 0.38 0.32 0.30 0.28 0.26 0.25 General Specifications Test Voltage ................................... 0.1 V Reflow Soldering ...230 °C, 50 sec. max. Operating Temp. ............-40 °C to +125 °C (Temperature rise included) Storage Temperature.. -40 °C to +125 °C Resistance to Soldering Heat ................................ 260 °C for 10 sec. Moisture Sensitivity Level......................1 ESD Classification (HBM) ..................N/A Materials Core ............................................. Ferrite Wire ........................... Enameled copper Adhesive ...............................Epoxy resin Terminal .................................... Ag/Ni/Sn Rated Current ................... Ind. drop 35 % typ. at Isat Temperature Rise ................... 30 °C typ. at rated Irms Packaging.................... 800 pcs. per reel Product Dimensions 4.80 ± 0.20 (.189 ± .008) 6R8 4.80 ± 0.20 (.189 ± .008) 1.80 ± 0.20 (.071 ± .008) Inductance vs. Current 1.60 (.063) TYP. 102 101 7 5 3 TYP. 1.60 (.063) 330 Inductance (μH) 2 101 7 DIMENSIONS: 100 5 MM (INCHES) 1.60 (.063) TYP. Recommended Layout 4R7 3 5.30 REF. (.209) 2 2.00 (.079) REF. 100 1R0 7 R 5 101 2 3 5 7 102 2 3 5 DC Current (mA) WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov 7 103 2 3 5 7 104 1.80 (.071) REF. REF. 1.50 (.059) 2.00 (.079) REF. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. SRR4018 Series - Shielded SMD Power Inductors Soldering Profile Electrical Schematic 275 Maximum of 10 seconds between +255°C and +260°C 260°C peak 255°C 225 220°C Temperature (°C) 190°C Ramp Down 6°C/second maximum 60 - 90 seconds 175 150°C 125 120 - 150 seconds 10 seconds minimum 75 Ramp Up 3°C/second maximum LCR METER 25 0 50 100 150 200 250 Time (seconds) 2.0 ± 0.5 (.079 ± .020) 178.0 (7.00) DIA. 300 Rev. 02/22/05 16.5 (.650) DIA. 13.0 (.511) 21.0 ± 0.8 (.827 ± .032) 50.0 - 0 (1.969 - 0) 13.0 DIA. (.511) 14.0 + 0 (.551 + 0) 8.0 (.315) END 6R8 4.0 (.157) 6R8 6R8 NO COMPONENT 200 (7.87) START 6R8 NO COMPONENT COMPONENTS 400 (15.75) USER DIRECTION OF FEED QTY: 800 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL