SRU2013-3R3Y

T PL IA N M CO *R oH S Features Applications ■ Maximum height of 1.5 mm ■ Input/output of DC/DC converters ■ Current up to 2.2 A ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs ■ RoHS compliant* A SRU2013 Series - Shielded SMD Power Inductors Inductance 100 KHz Bourns Part No. (μH) Tol. % Q Ref. Test Freq. (MHz) RDC Max. (mΩ) SRF Typ. (MHz) Irms Max. (A) Isat Typ. (A) Marking **KFactor SRU2013-1R0Y 1.0 ±30 9 7.96 180 65 2.20 1.60 A 2418 SRU2013-2R2Y 2.2 ±30 10 7.96 100 120 1.45 0.95 C 1497 SRU2013-3R3Y 3.3 ±30 10 7.96 80 135 1.00 0.86 E 1258 SRU2013-4R7Y 4.7 ±30 10 7.96 72 220 0.90 0.75 F 1014 SRU2013-6R8Y 6.8 ±30 10 7.96 60 330 0.80 0.60 G 898 SRU2013-100Y 10 ±30 12 2.52 40 520 0.67 0.45 H 731 SRU2013-150Y 15 ±30 12 2.52 30 850 0.46 0.40 I 593 SRU2013-220Y 22 ±30 12 2.52 25 880 0.40 0.35 J 484 SRU2013-330Y 33 ±30 12 2.52 20 1820 0.30 0.25 K 398 SRU2013-470Y 47 ±30 14 2.52 15 2860 0.25 0.23 L 318 Δ I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot. Core Loss vs. Flux Density Test Voltage ....................................0.1 V .. 230 °C, 50 sec. max. Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature .. -40 °C to +125 °C Resistance to Soldering Heat ............................... 260 °C for 10 sec. Moisture Sensitivity Level ..................... 1 ................. N/A Materials Core ....................Ferrite DR and RI core Terminal ....................................Ag/Ni/Sn Rated Current ...................Ind. drop 35 % typ. at Isat Temperature Rise .....................40 °C max. at rated Irms Packaging ................. 1,200 pcs. per reel Product Dimensions 100 2.80 ± 0.20 (.110 ± .008) Core Loss (mW) 10 A 1 1 MHz 500 KHz 300 KHz 200 KHz 100 KHz 50 KHz 0.1 2.80 ± 0.20 (.110 ± .008) 0.01 1.35 ± 0.15 (.053 ± .006) 0.001 100 1000 10000 0.90 (.035) TYP. Flux Density Bp-p (gauss) Electrical Schematic Recommended Layout REF. 0.65 (.026) 1.30 (.051) REF. 3.00 (.118) REF. 0.90 (.035) TYP. 1.20 (.047) REF. DIMENSIONS: * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 2.10 (.083) REF. MM (INCHES) 0.90 TYP. (.035) 1.00 REF. (.039) 1.00 (.039) REF. REF. 0.65 (.026) 1.24 (.049) REF. 1.20 (.047) REF. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov SRF0504 Filter SMD Power Inductors SRU2013Series Series- -Line Shielded 178.0 DIA. (7.008) 2.0 ± 0.5 (.079 ± .020) 21.0 ± 0.8 (.827 ± .031) 16.5 (.650) COVER TAPE 13.0 ± 0.5 (.512 ± .020) DIA. EMBOSSED CAVITY 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 12.0 (.472) 14.0 (.551) 4 (.157) END A START A A A 8 (.315) NO COMPONENT 200 (7.874) NO COMPONENT 400 (15.748) COMPONENTS USER DIRECTION OF FEED QTY: 1200 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL