SRU2016-2R2Y

T PL IA N M CO *R oH S Features Applications ■ Maximum height of 1.8 mm ■ Input/output of DC/DC converters ■ Current up to 2.2 A ■ Power supplies for: • Portable communication equipment • Camcorders • LCD TVs ■ RoHS compliant* A SRU2016 Series - Shielded SMD Power Inductors Bourns Part No. Inductance 100 KHz Tol. (μH) % SRU2016-1R0Y SRU2016-2R2Y SRU2016-3R0Y 1.0 2.2 3.0 ±30 ±30 ±30 8 8 8 7.96 7.96 7.96 250 120 90 60 105 135 2.20 1.60 1.50 1.60 1.00 0.87 SRU2016-4R7Y 4.7 ±30 8 7.96 80 215 1.15 0.74 F SRU2016-6R0Y 6.0 ±30 9 7.96 70 250 0.90 0.63 G 855 SRU2016-100Y 10 ±30 9 2.52 45 430 0.87 0.52 H 627 SRU2016-150Y 15 ±30 10 2.52 40 650 0.60 0.40 I 514 SRU2016-220Y 22 ±30 12 2.52 30 990 0.43 0.37 J 448 SRU2016-330Y 33 ±30 12 2.52 20 1470 0.41 0.29 K 376 SRU2016-470Y 47 ±30 15 2.52 20 1650 0.31 0.22 L 303 Q Ref. Test Freq. (MHz) SRF Typ. (MHz) RDC Max. (mΩ) Irms Max. (A) Isat Typ. (A) Marking **KFactor A C E 2170 1485 1227 973 SRU2016-680Y 68 ±30 18 2.52 15 3510 0.22 0.17 M 233 SRU2016-101Y 100 ±30 8 2.52 10 4900 0.19 0.15 N 209 Δ I (peak-to-peak ripple current, A), determine core loss from Core Loss vs. Flux Density plot. Core Loss vs. Flux Density Test Voltage ....................................0.1 V .. 230 °C, 50 sec. max. Operating Temperature ................................-40 °C to +125 °C (Temperature rise included) Storage Temperature ................................-40 °C to +125 °C Resistance to Soldering Heat ............................... 260 °C for 10 sec. Moisture Sensitivity Level ...................... 1 .................. N/A Materials Core ....................Ferrite DR and RI core Wire ............................Enameled copper Terminal ....................................Ag/Ni/Sn Rated Current ...................Ind. drop 35 % typ. at Isat Temperature Rise .....................40 °C max. at rated Irms Packaging ................. 1,000 pcs. per reel Product Dimensions 100 2.80 ± 0.20 (.110 ± .008) Core Loss (mW) 10 A 1 MHz 500 KHz 300 KHz 200 KHz 100 KHz 50 KHz 1 0.1 2.80 ± 0.20 (.110 ± .008) 1.65 ± 0.15 (.065 ± .006) 0.01 100 1000 10000 Flux Density Bp-p (gauss) Electrical Schematic REF. 0.65 (.026) 1.30 (.051) REF. * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf 0.90 (.035) TYP. Recommended Layout 2.10 (.083) REF. 3.00 (.118) REF. 1.20 (.047) REF. 0.90 (.035) TYP. DIMENSIONS: 1.00 REF. (.039) MM (INCHES) 0.90 TYP. (.035) 1.00 (.039) REF. REF. 0.65 (.026) 1.24 (.049) REF. 1.20 (.047) REF. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov SRF0504 Filter SMD Power Inductors SRU2016Series Series- -Line Shielded 178.0 DIA. (7.008) 2.0 ± 0.5 (.079 ± .020) 21.0 ± 0.8 (.827 ± .031) 16.5 (.650) COVER TAPE 13.0 ± 0.5 (.512 ± .020) DIA. EMBOSSED CAVITY 50.0 (1.969) 13.0 ± 0.5 DIA. (.512 ± .020) EMBOSSED CARRIER 12.0 (.472) 14.0 (.551) 4 (.157) END A START A A A 8 (.315) NO COMPONENT 200 (7.874) NO COMPONENT COMPONENTS 400 (15.748) USER DIRECTION OF FEED QTY: 1,000 PCS. PER REEL DIMENSIONS: MM (INCHES) REV. 03/18 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL